[Fwd: File Conduit problem]

From: Emanoil Kotsev <emanuel abc at>
To: gnome-pilot-list gnome org
Subject: [Fwd: File Conduit problem]
Date: Fri, 24 Jan 2003 00:47:57 +0100

Unfortunately I am looking for a wize sollution too

What I am doing right now as work arround is I am syncing all the stuff with Evolution except File, what I am doing with the pilot-manager.

I tought I could sync everything with pilot-manager, though it is not that functional as Evolution and above this I have other errors comming from the perl modules, that I could fix easier if I had the time - may be in feb. or march.

Untill then I will hope, look for, and be glad for some fix or sollution.

Below my config dump
I don't see any Pilot ID and some other thing diff file hanging down in this mail too produced by

find .gnome/gnome-pilot.d/ -type f -printf '######## \n' -print -exec cat {} \; > ./gnome-pilot.d_dump

It could be problem of gnome-core too I am not quite sure.

I will try to compile and fix it ASAP as said in feb, but it would be fine if this reaches somebody responsible for this issue and able to do something for us

If you have any informatioin let me know

regards

-- 
+ Emanoil Kotsev - - - - -+
| tel. 0043(1)9253175     |
| cel. --------------     |
+ E-Mail: emanuel abc at  +

--- Begin Message ---

From: Michael Timmins <mat3q virginia edu>
To: gnome-pilot-list gnome org
Subject: [Fwd: File Conduit problem]
Date: 23 Jan 2003 09:09:26 -0500

Hi again,
I though I should also post my config files (at least the ones i thought
might possibly be relevant).  There doesn't seem to be a configuration
file for the file conduit.  It is the only one which doesn't but i
haven't been able to find out whether there should be one or what should
be in it.
Thanks, Mike Timmins

*******************************************************
.gnome/.gnome-pilot.d/conduits():

[General]
conduits=gpbackup1 e_address_conduit e_calendar_conduit e_todo_conduit
gpmemo1 gptime1 gpsendmail1 malconduit1 gpfile1

[gpbackup1]
sync_type=custom

[e_address_conduit]
sync_type=synchronize

[e_calendar_conduit]
sync_type=synchronize

[e_todo_conduit]
sync_type=synchronize

[gpmemo1]
sync_type=synchronize

[gptime1]
sync_type=custom

[gpsendmail1]
sync_type=custom

[malconduit1]
sync_type=custom

[gpfile1]
sync_type=custom

*******************************************************
.gnome/.gnome-pilot.d/gpilotd:

[General]
sync_PC_Id=-1195810239
progress_stepping=1
num_devices=1
num_pilots=1

[Device0]
type=0
name=Cradle
device=/dev/pilot
speed=115200
timeout=2

[Pilot0]
name=MyPilot
pilotid=0
creation=0
romversion=0
pilotusername=mat3q
default_sync_action=custom
basedir=/home/mat3q/MyPilot
*******************************************************
.gnome/gnome-pilot.d/queue

[system]
number-of-requests=0
*******************************************************

-- 
Michael Timmins <mat3q virginia edu>
University of Virginia

--- Begin Message ---

From: Michael Timmins <mat3q virginia edu>
To: gnome-pilot-list gnome org
Subject: File Conduit problem
Date: 22 Jan 2003 18:02:09 -0500

Hi,
I'm running gnome-pilot under redhat 7.2 using the latest ximian-built
rpms.  All other conduits work fine except for the file conduit.  Any
suggestions? More info below.

Thanks in advance, 
Mike Timmins
 
I'm getting the following error message running gpilot-install-file:

gpilotd-WARNING **: gnome-pilot-client.gob:781: Caught exception:
IDL:GNOME/Pilot/UnknownPilot:1.0

The output from gpilotd looks like:
gpilotd-Message: gnome-pilot 0.1.69 starting...
gpilotd-Message: compiled for pilot-link version 0.11.5
gpilotd-Message: compiled with [VFS] [GOAD] [USB] [IrDA] [Network]
gpilotd-Message: Activating CORBA server
gpilotd-Message: Watching Cradle (/dev/pilot)
gpilotd-Message: gpilotd: corba: get_pilots(...)
gpilotd-Message: gpilotd: corba: request_install(pilot_name=MyPilot
(0),filename=/home/mat3q/.gpilotd/PDBMrmR2v,survival=1,tim
eout=0)
gpilotd-Message: Woke on Cradle
gpilotd-Message: setting PILOTRATE=115200
gpilotd-Message: Cradle Cradle has 0 events
gpilotd-Message: Instantiating 9 conduits...
gpilotd-Message: Instantiated 1 backup conduits, 1 file conduits, 7
other conduits
gpilotd-Message: HotSync button pressed, synchronizing pilot
gpilotd-Message: Pilot ID is 0, name is MyPilot, owner is  @ .@
@T! DQv@C
gpilotd-Message: Pilot has 0 entries in restore queue
gpilotd-Message: Pilot has 0 entries in conduit queue
gpilotd-Message: Using conduit settings for sync...
gpilotd-Message: Pilot has 0 entries in file install queue


-- 
Michael Timmins <mat3q virginia edu>
University of Virginia

_______________________________________________
gnome-pilot-list mailing list
gnome-pilot-list gnome org
http://mail.gnome.org/mailman/listinfo/gnome-pilot-list

--- End Message ---

######## 
.gnome/gnome-pilot.d/gpilotd

[General]
sync_PC_Id=1869375824
progress_stepping=1073754228
num_devices=1
num_pilots=1

[Device0]
type=0
name=Cradle
device=/dev/pilot
speed=57600
timeout=2

[Pilot0]
name=Brain
pilotid=1000
creation=0
romversion=0
pilotusername=Emanoil Kotsev
default_sync_action=custom
basedir=/home/emanoil/Brain
######## 
.gnome/gnome-pilot.d/queue

[system]
number-of-requests=1

[system-5]
type=GREQ_GET_USERINFO
device=MyPilot
timeout=0
handle=5
client_id=IOR:010000001b00000049444c3a474e4f4d452f50696c6f742f436c69656e743a312e30000001000000caaedfba54000000010100002b0000002f746d702f6f726269742d656d616e6f696c2f6f72622d333934383239363736313034343630313939360000000000001800000000000000f92d74259bebf076020000002e0ba66075305092
######## 
.gnome/gnome-pilot.d/conduits501

[General]
conduits=e_address_conduit e_calendar_conduit e_todo_conduit malconduit1 test_conduit gptime1 gpexpense1 

[e_address_conduit]
sync_type=synchronize

[e_calendar_conduit]
sync_type=synchronize

[e_todo_conduit]
sync_type=synchronize

[malconduit1]
sync_type=custom

[test_conduit]
sync_type=synchronize

[gptime1]
sync_type=synchronize

[gpexpense1]
sync_type=synchronize
######## 
.gnome/gnome-pilot.d/expense-conduit

[Pilot_501]
dir=/home/emanoil/evolution/expense
date_format=%x
output_format=0
dir mode=0700
file mode=0600

[Pilot_1000]
dir=
date_format=%x
output_format=0
dir mode=0700
file mode=0600
######## 
.gnome/gnome-pilot.d/mal-conduit

[Pilot_501]
once_a_day=true
last_sync=1
######## 
.gnome/gnome-pilot.d/time-conduit

[Pilot_501]
direction=0

[Pilot_1000]
direction=1
######## 
.gnome/gnome-pilot.d/e-address-conduit

[Pilot_501]
open_secret=false
last_uri=file:///home/emanoil/evolution/local/Contacts/addressbook.db

[Pilot_1000]
open_secret=false
last_uri=file:///home/emanoil/evolution/local/Contacts/addressbook.db
######## 
.gnome/gnome-pilot.d/e-todo-conduit

[Pilot_501]
open_secret=false
last_uri=/home/emanoil/evolution/local/Tasks/tasks.ics

[Pilot_1000]
open_secret=false
last_uri=/home/emanoil/evolution/local/Tasks/tasks.ics
######## 
.gnome/gnome-pilot.d/e-calendar-conduit

[Pilot_501]
open_secret=false
last_uri=/home/emanoil/evolution/local/Calendar/calendar.ics

[Pilot_1000]
open_secret=false
last_uri=/home/emanoil/evolution/local/Calendar/calendar.ics
######## 
.gnome/gnome-pilot.d/PilotCache501

[Databases]
databases=Unsaved\\ Preferences Saved\\ Preferences Graffiti\\ ShortCuts Net\\ Prefs AddressDB LauncherDB MemoDB ToDoDB MailDB NetworkDB MIDI\\ Sounds DatebookDB ExpenseDB VendorsDB CitiesDB MathLib Puzzle Giraffe HardBall Parens\\ Lite Giraffe\\ High\\ Score MBlnProfile 
######## 
.gnome/gnome-pilot.d/conduits1000

[General]
conduits=e_address_conduit e_calendar_conduit e_todo_conduit test_conduit gptime1 

[e_address_conduit]
sync_type=synchronize

[e_calendar_conduit]
sync_type=synchronize

[e_todo_conduit]
sync_type=synchronize

[test_conduit]
sync_type=synchronize

[gptime1]
sync_type=synchronize
######## 
.gnome/gnome-pilot.d/PilotCache1000

[Databases]
databases=AddressDB DatebookDB MailDB MemoDB ConnectionDB NetworkDB ToDoDB Graffiti AddressCitiesDB AddressCompaniesDB AddressCountriesDB psysLaunchDB Graffiti\\ ShortCuts Graffiti_deDE Unsaved\\ Preferences Net\\ Prefs MIDI\\ Sounds Saved\\ Preferences AddressStatesDB AddressTitlesDB

0a1,2
> *******************************************************
> .gnome/.gnome-pilot.d/conduits():
3,4c5,40
< sync_PC_Id=1869375824
< progress_stepping=1073754228
---
> conduits=gpbackup1 e_address_conduit e_calendar_conduit e_todo_conduit
> gpmemo1 gptime1 gpsendmail1 malconduit1 gpfile1
> 
> [gpbackup1]
> sync_type=custom
> 
> [e_address_conduit]
> sync_type=synchronize
> 
> [e_calendar_conduit]
> sync_type=synchronize
> 
> [e_todo_conduit]
> sync_type=synchronize
> 
> [gpmemo1]
> sync_type=synchronize
> 
> [gptime1]
> sync_type=custom
> 
> [gpsendmail1]
> sync_type=custom
> 
> [malconduit1]
> sync_type=custom
> 
> [gpfile1]
> sync_type=custom
> 
> *******************************************************
> .gnome/.gnome-pilot.d/gpilotd:
> 
> [General]
> sync_PC_Id=-1195810239
> progress_stepping=1
12c48
< speed=57600
---
> speed=115200
16,17c52,53
< name=Brain
< pilotid=1000
---
> name=MyPilot
> pilotid=0
20c56
< pilotusername=Emanoil Kotsev
---
> pilotusername=mat3q
22c58,64
< basedir=/home/emanoil/Brain
---
> basedir=/home/mat3q/MyPilot
> *******************************************************
> .gnome/gnome-pilot.d/queue
> 
> [system]
> number-of-requests=0
> *******************************************************

Follow-Ups:
- Re: [Fwd: File Conduit problem]
  - From: Michael Timmins

[Date Prev][Date Next] [Thread Prev][Thread Next] [Thread Index] [Date Index] [Author Index]