Re: pilot-xfer works, gpilotd doesn't

[Jack Coates <jack monkeynoodle org>]

by the by, upgrading to 9.1 and changing some settings seems to have
helped.

Palm V
serial to usb adapter
pilot-link-0.11.7-1mdk
gnome-pilot-0.1.71-2mdk

After upgrading the OS, I changed my Cradle settings to be Serial
instead of USB. Now if I simply kill gpilotd and restart it in an xterm,
it will sync with Evolution most of the time.

Jack

On Thu, 2003-03-06 at 12:42, Jack Coates wrote:
> any ideas? Bueller?
> 
> On Tue, 2003-03-04 at 22:12, Jack Coates wrote:
> > Mandrake 9.0 on a Sony Vaio VX88 laptop with kernel 2.4.20-2mdk (visor.c
> > v1.6), trying to sync a Palm V via a Prolific PL2303 USB to serial
> > adapter as this laptop has no serial ports. Here's what that adapter
> > looks like:
> > 
> > Feb 27 16:08:30 chupacabra kernel: hub.c: new USB device 00:1f.2-1,
> > assigned address 2
> > Feb 27 16:08:30 chupacabra kernel: usb.c: USB device 2 (vend/prod
> > 0x67b/0x2303) is not claimed by any active driver.
> > Feb 27 16:08:33 chupacabra /etc/hotplug/usb.agent: Setup pl2303 for USB
> > product 67b/2303/202
> > Feb 27 16:08:33 chupacabra kernel: usbserial.c: USB Serial support
> > registered for PL-2303
> > Feb 27 16:08:33 chupacabra kernel: usbserial.c: PL-2303 converter
> > detected
> > Feb 27 16:08:33 chupacabra kernel: usbserial.c: PL-2303 converter now
> > attached to ttyUSB0 (or usb/tts/0 for devfs)
> > Feb 27 16:08:33 chupacabra kernel: pl2303.c: Prolific PL2303 USB to
> > serial adaptor driver v0.9
> > 
> > & here's the load of libraries, tools, &c when I started...
> > [jack chupacabra jack]$ rpm -qa | grep pilot
> > libgnome-pilot1-0.1.71-2mdk
> > pilot-link-0.11.5-5.ximian.1
> > gnome-pilot-conduits-0.10-1.ximian.1
> > libgnome-pilot1-devel-0.1.71-2mdk
> > evolution-pilot-1.2.2-1.ximian.1
> > gnome-pilot-0.1.71-2mdk
> > pilot-link-devel-0.11.5-5.ximian.1
> > 
> > I've also tried:
> > installing the Mandrake 9.0 RPMs for gnome-pilot, libgnome-pilot, and
> > pilot-link (via urpmi)
> > installing the 9.1 RC1 "cooker" RPMS for gnome-pilot, libgnome-pilot,
> > and pilot-link (via rebuild of src.rpm)
> > installing the Ximian RPMs for gnome-pilot, libgnome-pilot, and
> > pilot-link (via red-carpet)
> > 
> > None of these attempts changed the situation in any way; pilot-xfer
> > works, gpilotd doesn't (& produces zero helpful output).
> > gpilotd-Message: gnome-pilot 0.1.71 starting...
> > gpilotd-Message: compiled for pilot-link version 0.11.7
> > gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network] 
> > gpilotd-Message: Activating CORBA server
> > gpilotd-Message: Watching Cradle (/dev/ttyUSB0)
> > 
> > /dev/ttyUSB0 is a symlink to /dev/usb/tts/0, which is correctly setup
> > via devfs. I tried making a /dev/pilot symlink too in case something was
> > hard coded, no soap.
> > 
> > And here's my problem: it works fine using pilot-xfer -- I can do
> > anything at all. gpilotd is totally useless, not even
> > gpilot-install-file works. Any ideas? I've tried running gpilotd from a
> > console to get its output, and it seems to be listening to the right
> > port, it just never hears the Palm V, which eventually times out. Is
> > there an undocumented --debug or --verbose feature?
> > 
> > pilot-xfer works, gpilotd doesn't (& produces zero helpful output).
> > gpilotd-Message: gnome-pilot 0.1.71 starting...
> > gpilotd-Message: compiled for pilot-link version 0.11.7
> > gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network] 
> > gpilotd-Message: Activating CORBA server
> > gpilotd-Message: Watching Cradle (/dev/ttyUSB0)
> > 
> > thanks,
-- 
Jack Coates
Monkeynoodle: A Scientific Venture...
Are you compliant yet? ftp://ftp.rfc-editor.org/in-notes/rfc3514.txt