Re: gnome-pilot-list digest, Vol 1 #426 - 1 msg

[Steve Gebbia <byline mindspring com>]

Paul,
  thanks for the reply and the info ... but I've found a way to do this
without downloading a new control center. It seems that the only thing
missing is an applet.
so ... after some tiem looking through the Gnome User Board archives, I
found this ...
simply run the following from and Xterm - as User:
"gpilotd-control-applet --cap-id=1"
that last part "--cap-id=1" is apparently the golden egg here. that
calls up the conduit setup.
... this will bring up a conduit setup box where you can select which
conduits you want to turn on. Be sure to run gnome-pilot and do your
initial synch first.
... This works. It took me about 2 minutes to set mine up and do a full
synch.
... then, when you want to hot-synch, launch the pilot tool from the
control panel and then hit your hot-synch button. the only time you'll
need to come back to the conduit setup box is if you ever what to change
your conduits.
Just in case, I created an alias in bashrc.
(alias conduit='gpilotd-control-applet --cap-id=1'

take care and thanks again
steve

On Sun, 2002-11-03 at 22:03, Paul Huang wrote:
> Hi Steve
> 
> I've met the same problem. I would like to share some of my experience 
> with you:
> 
> I have checked some website and find that the configuration of the 
> conduits should
> be done in the gnome control center plus. The latest version of the 
> gnomecc-plus you
> can find is control-center-plus-1.5.8-ximian.1.i386.rpm, which 
> unfortunately is for
> redhat 7.2. I tried to install it on redhat 8.0, and failed due to the 
> lack of
> libconfig-archiver.so.0. This library is provided in the package 
> control-center-1.5.12.ximian.2.i386.rpm,
> which, due to a pre-installed newer version of control-center plus in 
> the redhat 8.0, will not go for redhat 8.0, .
> 
> I am still trying to find way out to install gnomecc-plus to configure 
> the conduits and make
> all the conduits available to the gpilot. I will mail them out if I've 
> got any.
> 
> Your comments are also welcomed.
> 
> Regards
> 
> -Paul
> 
> gnome-pilot-list-request gnome org wrote:
> 
> >Send gnome-pilot-list mailing list submissions to
> >	gnome-pilot-list gnome org
> >
> >To subscribe or unsubscribe via the World Wide Web, visit
> >	http://mail.gnome.org/mailman/listinfo/gnome-pilot-list
> >or, via email, send a message with subject or body 'help' to
> >	gnome-pilot-list-request gnome org
> >
> >You can reach the person managing the list at
> >	gnome-pilot-list-admin gnome org
> >
> >When replying, please edit your Subject line so it is more specific
> >than "Re: Contents of gnome-pilot-list digest..."
> >
> >
> >Today's Topics:
> >
> >   1. pilot setup ... conduits (Steve Gebbia)
> >
> >--__--__--
> >
> >Message: 1
> >Subject: pilot setup ... conduits
> >From: Steve Gebbia <byline mindspring com>
> >To: gnome-pilot-list gnome org
> >Date: 02 Nov 2002 14:08:56 -0500
> >Reply-To: gnome-pilot-list gnome org
> >
> >Hi all,
> >  I recently installed RH 8.0 and am attempting to setup my Palm
> >conduits.
> >  Where can I find the app to set up my conduits?
> >  My Palm is connected, and I've successfully completed my initial synch
> >to Gnome-Pilot ... the Gnome Conduits box appears and shows my Palm ...
> >with the option "use conduits" selected ... but I haven't been able to
> >locate the conduit setup program.
> >
> >anyone ?
> >Thanks
> >Steve
> >
> >
> >
> >
> >
> >
> >--__--__--
> >
> >_______________________________________________
> >gnome-pilot-list mailing list
> >gnome-pilot-list gnome org
> >http://mail.gnome.org/mailman/listinfo/gnome-pilot-list
> >
> >
> >End of gnome-pilot-list Digest
> >
> 
> 
> _______________________________________________
> gnome-pilot-list mailing list
> gnome-pilot-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list