Re: Syncing Visor with Linux and gpilotd

[Russ Loucks <rjl mm com>]

On Tue, 2002-07-16 at 09:21, Russ Loucks wrote:
> 
> I've been using Linux for some time and syncing my Visor with a Windows
> system  for some time as well.  However, I would like to get my Visor to
> sync with my Linux workstation...

(snip)

Some people have wondered what /proc/bus/usb/devices contains when the
hotsync button on my Visor is pushed.  The details follow:

$ cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=ff80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=082d ProdID=0100 Rev= 1.00
S:  Manufacturer=Handspring Inc
S:  Product=Handspring Visor
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
E:  Ad=81(I) Atr=02(Bulk) MxPS=  16 Ivl= 10ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  16 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms


R
-- 
Russ Loucks
mailto: rjl mm com
office: (952) 842-5358  
mobile: (612) 387-4108