Synch via Docking Station

["T. H. Newman" <newmanth usa net>]

Tried ttyS0, tty00, tty01 and ttyS00 along with several other tty** combinations without
any luck.

I suspect I've got a conflict problem based on my troubles with the COM port settings under
Windows 98.  

Is there anyway to determine all the IRQ settings and try to change the interrupt for the
COM ports directly?  

I've got an internal modem (not being used), pcmcia modem, PS 2 mouse (plugged into
the docking station port and a Synaptic Touch pad (which doesn't work with the PS2 Mouse)

Could there be a conflict somewhere, and if so how do I troubleshoot it?

Thanks,

Tom


Message: 2
Date: Sun, 11 Feb 2001 02:05:38 +0100
From: Rolf Schaeuble 
To: gnome-pilot-list gnome org
Subject: Re: Synch via Docking Station?
Reply-To: gnome-pilot-list gnome org

On Sat, Feb 10, 2001 at 05:24:38PM -0500, T. H. Newman wrote:
> Hello,
>
> I'm running Red Hat 7.0 on my Compaq Presario laptop and am trying to
> get it to synch with my Palm Vx.  Since the laptop only has a USB
> connection (no serial ports or IrDA connection) I purchased a docking
> station in order to synch using  gnome-pilot (among other reasons).
> I've been unable to get pilot-xfer to work with this configuration.
>
> Is it possible to synch via a docking station with a serial port?
>
> If anyone has any suggestions, I'd appreciate the help.
>
>
> Here is my list of serial ports recognized by Linux
>
> $ dmesg | fgrep tty
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> tty01 at 0x02f8 (irq = 3) is a 16550A
>
> I then tried the export PILOTPORT=dev/ttyS00
>
> When I run
>
> $ pilot-xfer -b palm
>
> I get a msg "Unable to bind to port dev/ttyS00"
>
> (Same thing for tty01)
>
> Here are the packages I have installed
>
> $ rpm -qa | egrep pilot
> pilot-link-0.9.5-0_helix_2
> gnome-pilot-0.1.55-0_helix_1
>
>
> Thanks,
>
> -Tom

Try /dev/ttyS0 insted of /dev/ttyS00. In my /dev/ directory i can't find ttyS00, but have ttyS0. Perhaps this helps.

Regards

Rolf Schaeuble

> _______________________________________________
> gnome-pilot-list mailing list
> gnome-pilot-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list

--
	While the engineer developed his thesis, the director leaned over to
his assistant and whispered, "Did you ever hear of why the sea is salt?"
	"Why the sea is salt?" whispered back the assistant.  "What do you
mean?"
	The director continued: "When I was a little kid, I heard the story of
`Why the sea is salt' many times, but I never thought it important until just
a moment ago.  It's something like this: Formerly the sea was fresh water and
salt was rare and expensive.  A miller received from a wizard a wonderful
machine that just ground salt out of itself all day long.  At first the miller
thought himself the most fortunate man in the world, but soon all the villages
had salt to last them for centuries and still the machine kept on grinding
more salt.  The miller had to move out of his house, he had to move off his
acres.  At last he determined that he would sink the machine in the sea and
be rid of it.  But the mill ground so fast that boat and miller and machine
were sunk together, and down below, the mill still went on grinding and that's
why the sea is salt."
	"I don't get you," said the assistant.
		-- Guy Endore, "Men of Iron"



--__--__--