RE: problem sync'ing with gnome-pim

[Glenn Attwood <gattwood home com>]

hrm... well, I got it to sync once(the todo's didn't make it though.

*but* its still acting weird. I'm attaching the output of three runs
of the hotsync:

run1: start gpilotd, gnomecal is not started
      result: failure to sync (same as last message), and gnomecal
	      starts up. So I HotSync again, and get a different
	      error. (see attachemnt)
run2: start gnomecal, the start gpilotd
      result: gnomecal the sync'd with Palm... except no todo's. (see
	      attachment) 

run3: start gpilotd, the start gnomecal (empty one)
      result: gnomecal segfaults (see attachment)
      NB: if gnomecal has data in it, it dosen't segfault at this
	  point

any ideas?
-- 
Glenn Attwood
==============================================
"No! Try not! Do, or do not. There is no try."
	-master Yoda

gpilotd-Message: gnome-pilot 0.1.48 starting...
gpilotd-Message: compiled for pilot-link version 0.9.4
gpilotd-Message: Watching Cradle0 (/dev/pilot)
gpilotd-Message: Woke on Cradle0
gpilotd-Message: gpilotd: setting PILOTRATE=115200
gpilotd-Message: Cradle Cradle0 has 0 events
gpilotd-Message: Loading 5 conduits...
Message: address: creating GnomeCard conduit
gpilotd-Message: HotSync button pressed, synchronizing pilot
gpilotd-Message: Pilot ID is 500, name is MyPilot, owner is Glenn Attwood
gpilotd-Message: Pilot has 0 entries in get_sysinfo queue
gpilotd-Message: Pilot has 0 entries in restore queue
gpilotd-Message: Pilot has 0 entries in conduit queue
gpilotd-Message: Using conduit settings for sync...
gpilotd-Message: Pilot has 0 entries in file install queue
Message: GnomeCard conduit v 0.3
Message: address: PreSync
gpilotd-Message: Performing Fast Synchronization
Message: address: IterateSpecific, *local == NULL,    flag = 1, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 3, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 2, archived = 0
Message: address: Purge
gcalconduit-Message: GnomeCal Conduit v.0.8.11

gcalconduit-WARNING **: Can not communicate with GnomeCalendar server

gcalconduit-WARNING **: Could not start gnomecal server

gpilotd-WARNING **: Conduits initialization failed, aborting operation
backupconduit-Message: Making backup of ExpenseDB

backupconduit-WARNING **: Backup of ExpenseDB failed!
backupconduit-Message: Making backup of LauncherDB

backupconduit-WARNING **: Backup of LauncherDB failed!
backupconduit-Message: Making backup of MailDB

backupconduit-WARNING **: Backup of MailDB failed!
Message: MemoFile Conduit v 0.6
gpilotd-Message: Performing Slow Synchronization
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
gpilotd-Message: gpilotd: sync_record: case 1
backupconduit-Message: Making backup of Unsaved Preferences
backupconduit-Message: Making backup of Saved Preferences
gpilotd-Message: Synchronization ended
Message: address: destroying GnomeCard conduit
gpilotd-Message: Watching Cradle0 (/dev/pilot)
gpilotd-Message: Woke on Cradle0
gpilotd-Message: gpilotd: setting PILOTRATE=115200
gpilotd-Message: Cradle Cradle0 has 0 events
gpilotd-Message: Loading 5 conduits...
Message: address: creating GnomeCard conduit
gpilotd-Message: HotSync button pressed, synchronizing pilot
gpilotd-Message: Pilot ID is 500, name is MyPilot, owner is Glenn Attwood
gpilotd-Message: Pilot has 0 entries in get_sysinfo queue
gpilotd-Message: Pilot has 0 entries in restore queue
gpilotd-Message: Pilot has 0 entries in conduit queue
gpilotd-Message: Using conduit settings for sync...
gpilotd-Message: Pilot has 0 entries in file install queue
Message: GnomeCard conduit v 0.3
Message: address: PreSync
gpilotd-Message: Performing Fast Synchronization
Message: address: IterateSpecific, *local == NULL,    flag = 1, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 3, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 2, archived = 0
Message: address: Purge
gcalconduit-Message: GnomeCal Conduit v.0.8.11
gpilotd-Message: Performing Slow Synchronization
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
gcalconduit-Message: Object did not exist
gpilotd-Message: gpilotd: sync_record: case 1
backupconduit-Message: Making backup of ExpenseDB
backupconduit-Message: Making backup of LauncherDB
backupconduit-Message: Making backup of MailDB
Message: MemoFile Conduit v 0.6
gpilotd-Message: Performing Slow Synchronization
gpilotd-Message: gpilotd: sync_record: case 11 No Record
gpilotd-Message: gpilotd: sync_record: case 11 No Record
gpilotd-Message: gpilotd: sync_record: case 11 No Record
gpilotd-Message: gpilotd: sync_record: case 11 No Record
gpilotd-Message: gpilotd: sync_record: case 11 No Record
gpilotd-Message: gpilotd: sync_record: case 1
backupconduit-Message: Making backup of Unsaved Preferences
backupconduit-Message: Making backup of Saved Preferences
gpilotd-Message: Synchronization ended
Message: address: destroying GnomeCard conduit
gpilotd-Message: Watching Cradle0 (/dev/pilot)

gpilotd-Message: gnome-pilot 0.1.48 starting...
gpilotd-Message: compiled for pilot-link version 0.9.4
gpilotd-Message: Watching Cradle0 (/dev/pilot)
gpilotd-Message: Woke on Cradle0
gpilotd-Message: gpilotd: setting PILOTRATE=115200
gpilotd-Message: Cradle Cradle0 has 0 events
gpilotd-Message: Loading 5 conduits...
Message: address: creating GnomeCard conduit
gpilotd-Message: HotSync button pressed, synchronizing pilot
gpilotd-Message: Pilot ID is 500, name is MyPilot, owner is Glenn Attwood
gpilotd-Message: Pilot has 0 entries in get_sysinfo queue
gpilotd-Message: Pilot has 0 entries in restore queue
gpilotd-Message: Pilot has 0 entries in conduit queue
gpilotd-Message: Using conduit settings for sync...
gpilotd-Message: Pilot has 0 entries in file install queue
Message: GnomeCard conduit v 0.3
Message: address: PreSync
gpilotd-Message: Performing Fast Synchronization
Message: address: IterateSpecific, *local == NULL,    flag = 1, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 3, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 2, archived = 0
Message: address: Purge
gcalconduit-Message: GnomeCal Conduit v.0.8.11
gpilotd-Message: Performing Fast Synchronization
Message: MemoFile Conduit v 0.6
gpilotd-Message: Performing Fast Synchronization
backupconduit-Message: Making backup of Unsaved Preferences
backupconduit-Message: Making backup of Saved Preferences
gpilotd-Message: Synchronization ended
Message: address: destroying GnomeCard conduit
gpilotd-Message: Watching Cradle0 (/dev/pilot)

gpilotd-Message: gnome-pilot 0.1.48 starting...
gpilotd-Message: compiled for pilot-link version 0.9.4
gpilotd-Message: Watching Cradle0 (/dev/pilot)
gpilotd-Message: Woke on Cradle0
gpilotd-Message: gpilotd: setting PILOTRATE=115200
gpilotd-Message: Cradle Cradle0 has 0 events
gpilotd-Message: Loading 5 conduits...
Message: address: creating GnomeCard conduit
gpilotd-Message: HotSync button pressed, synchronizing pilot
gpilotd-Message: Pilot ID is 500, name is MyPilot, owner is Glenn Attwood
gpilotd-Message: Pilot has 0 entries in get_sysinfo queue
gpilotd-Message: Pilot has 0 entries in restore queue
gpilotd-Message: Pilot has 0 entries in conduit queue
gpilotd-Message: Using conduit settings for sync...
gpilotd-Message: Pilot has 0 entries in file install queue
Message: GnomeCard conduit v 0.3
Message: address: PreSync
gpilotd-Message: Performing Fast Synchronization
Message: address: IterateSpecific, *local == NULL,    flag = 1, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 3, archived = 0
Message: address: IterateSpecific, *local == NULL,    flag = 2, archived = 0
Message: address: Purge
gcalconduit-Message: GnomeCal Conduit v.0.8.11