FontPath



Darryl,

Thanks for help on my screen resolution problem.  Then, you mentioned a 
solution to a possible font problem.  Although my fonts are ok when logged in 
as a user (non-root), your solution suggested a another problem that I've 
given up on (see attachment).  Can I change the XF86Config file FontPath 
section to point directly to '/usr/X11R6/X11/fonts/100dpi'?  When logging in 
gnome as root, there a error finding the fonts.  If I directly place the 
fonts into the config file, might that help?

Thanks again,
Marty

XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.1-ac1 i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
      sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
      tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
      tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
      tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
      cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
      3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301,
      ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
      ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
      AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160,
      NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic
(using VT number 2)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "My Video Card"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) SVGA: Mode "1152x864" needs vert refresh rate of 89.18 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 84.99 Hz. Deleted.
(--) SVGA: Mode "1280x1024" needs vert refresh rate of 87.59 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs vert refresh rate of 75.94 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs vert refresh rate of 85.45 Hz. Deleted.
(--) SVGA: Mode "1152x864" needs vert refresh rate of 78.06 Hz. Deleted.
(--) SVGA: Mode "1152x864" needs vert refresh rate of 83.72 Hz. Deleted.
(--) SVGA: Mode "1280x1024" needs vert refresh rate of 74.11 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
(--) SVGA: Mode "320x240" needs vert refresh rate of 75.14 Hz. Deleted.
(--) SVGA: Mode "400x300" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "480x300" needs vert refresh rate of 72.07 Hz. Deleted.
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: NVidia Riva TNT rev 4, Memory @ 0xe0000000, 0xe2000000
(--) SVGA: chipset:  RIVATNT
(--) SVGA: videoram: 16256k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 250.000 MHz
(**) SVGA: Mode "1600x1200": mode clock = 162.000
(--) SVGA: Virtual resolution set to 1600x1200
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: RIVATNT: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: Using 12 128x64 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments

_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path 'unix/:-1'
Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]