Re: Fwd: String additions to 'gnome-disk-utility.master'



Hey,

Sorry about that. Here's a gnome-3-2 branch

http://git.gnome.org/browse/gnome-disk-utility/log/?h=gnome-3-2

Thanks,
David

On Fri, 2012-01-20 at 23:08 +0100, Mario Blättermann wrote:
> Hi David,
> 
> your recent commits to the gnome-disk-utility Git repository break the
> string freeze for GNOME 3.2, because there's no branch for gnome-3-2
> yet. Please branch for gnome 3.2 in an earlier stage.
> 
> Best Regards,
> Mario
> 
> 
> -------- Original-Nachricht --------
> Betreff: String additions to 'gnome-disk-utility.master'
> Datum: Fri, 20 Jan 2012 21:49:43 -0000
> Von: GNOME Status Pages <noreply gnome org>
> An: gnome-i18n gnome org
> 
> This is an automatic notification from status generation scripts on:
> http://l10n.gnome.org.
> 
> There have been following string additions to module
> 'gnome-disk-utility.master':
> 
> + "%d <span size=\"small\">(Worst:%d, Threshold: %d)</span>"
>     + "%d hour"
>     + "%d hours"
>     + "%d minute"
>     + "%d minutes"
>     + "%d msec"
>     + "%d second"
>     + "%d seconds"
>     + "%s (%s)"
>     + "%s <span size=\"smaller\">(Read-Only)</span>"
>     + "%s Block Device"
>     + "%s Loop Device"
>     + "%s ago"
>     + "/etc/crypttab configuration data is malformed"
>     + "A file named \"%s\" already exists.  Do you want to replace it?"
>     + "All Files"
>     + "All data on the partition will be lost"
>     + "All data on the volume will be lost"
>     + "All existing data will be lost"
>     + "Are you sure you want to format the disk?"
>     + "Are you sure you want to write the disk image to the device?"
>     + "Cannot create a new partition. There are already four primary
> partitions."
>     + "Cannot restore image of size 0"
>     + "Changing the passphrase for this device, will also update the
> passphrase referenced by the <i>/etc/crypttab</i> file"
>     + "Compatible with Linux systems"
>     + "Compatible with all systems and devices"
>     + "Compatible with modern systems and hard disks > 2TB"
>     + "Compatible with most systems"
>     + "Copying data from device <i>%s</i>..."
>     + "Copying data to device <i>%s</i>..."
>     + "Custom"
>     + "DISK IS LIKELY TO FAIL SOON"
>     + "Description"
>     + "Disk Drives"
>     + "Disk Image of %s (%s).img"
>     + "Disk Images (*.img, *.iso)"
>     + "Disk is OK, one attribute failed in the past"/"Disk is OK, %d
> attributes failed in the past"
>     + "Disk is OK, one bad sector"/"Disk is OK, %d bad sectors"
>     + "Disk is OK, one failing attribute is failing"/"Disk is OK, %d
> attributes are failing"
>     + "Disks"
>     + "Encrypted, compatible with Linux systems"
>     + "Enter filesystem type"
>     + "Error aborting SMART self-test"
>     + "Error adding /etc/crypttab entry"
>     + "Error adding new /etc/fstab entry"
>     + "Error attaching disk image"
>     + "Error changing passphrase"
>     + "Error deleting loop device"
>     + "Error determing size of file"
>     + "Error determining size of device"
>     + "Error ejecting media"
>     + "Error formatting disk"
>     + "Error formatting partition"
>     + "Error locking encrypted device"
>     + "Error mounting filesystem"
>     + "Error opening device"
>     + "Error opening file for reading"
>     + "Error opening file for writing"
>     + "Error reading from offset %"
>     + "Error refreshing SMART data"
>     + "Error removing /etc/crypttab entry"
>     + "Error removing old /etc/fstab entry"
>     + "Error retrieving configuration data"
>     + "Error setting label"
>     + "Error setting partition flags"
>     + "Error setting partition name"
>     + "Error setting partition type"
>     + "Error starting SMART self-test"
>     + "Error starting swap"
>     + "Error stopping swap"
>     + "Error unlocking encrypted device"
>     + "Error unmounting filesystem"
>     + "Error updating /etc/crypttab entry"
>     + "Error updating /etc/crypttab"
>     + "Error updating /etc/fstab entry"
>     + "Error writing to backup image"
>     + "Every time data is collected <span size=\"small\">(Online)</span>"
>     + "Extended partition"
>     + "Failure is a sign the disk exceeded its intended design life
> period (Old-Age)"
>     + "Failure is a sign the disk exceeded its intended design life
> period <span size=\"small\">(Old-Age)</span>"
>     + "Failure is a sign the disk will fail within 24 hours (Pre-Fail)"
>     + "Failure is a sign the disk will fail within 24 hours <span
> size=\"small\">(Pre-Fail)</span>"
>     + "Fair"
>     + "Filesystem Root"
>     + "For logical partitions"
>     + "GPT"
>     + "If checked, the loop device will be read-only. This is useful if
> you don't want the underlying file to be modified"
>     + "LUKS + Ext4"
>     + "Less than a minute"
>     + "MBR / DOS"
>     + "Matches any device with the given label"
>     + "Matches partition %d of any device connected at the given port or
> address"
>     + "Matches partition %d of the device with the given vital product data"
>     + "Matches the device with the given UUID"
>     + "Matches the given device"
>     + "Matches the whole disk of any device connected at the given port
> or address"
>     + "Matches the whole disk of the device with the given vital product
> data"
>     + "No Media"
>     + "No partitioning"
>     + "No"
>     + "OK"
>     + "Only during off-line activities <span size=\"small\">(Not
> Online)</span>"
>     + "Only the passphrase referenced by the <i>/etc/crypttab</i> file
> will be changed. To change the on-disk passphrase, use <i>Change
> Passphrase...</i>"
>     + "Other Devices"
>     + "SELF-TEST FAILED"
>     + "SMART is not enabled"
>     + "SMART is not supported"
>     + "Select Disk Image to Attach"
>     + "Self-test in progress — %d%% remaining"
>     + "Set up _read-only loop device"
>     + "Strong"
>     + "The file already exists in \"%s\".  Replacing it will overwrite
> its contents."
>     + "The selected image is %s bytes bigger than the device"
>     + "The selected image is %s bytes smaller than the device"
>     + "The strength of the passphrase"
>     + "The system may not work correctly if this entry is modified or
> removed."
>     + "This is the last primary partition that can be created."
>     + "Threshold exceeded"
>     + "Threshold not exceeded"
>     + "Type"
>     + "Unallocated Space (%s)"
>     + "Updates"
>     + "Weak"
>     + "Will be created"
>     + "Will be deleted"
>     + "Yes"
>     + "Yes, mounted at %s"
>     + "_Attach"
>     + "_Replace"
>     + "_Restore"
>     + "partition type"::"Unknown"
>     + "smart-self-test-result"::"Last self-test completed successfully"
>     + "smart-self-test-result"::"Last self-test did not complete"
>     + "smart-self-test-result"::"Last self-test failed (electrical)"
>     + "smart-self-test-result"::"Last self-test failed (handling)"
>     + "smart-self-test-result"::"Last self-test failed (read)"
>     + "smart-self-test-result"::"Last self-test failed (servo)"
>     + "smart-self-test-result"::"Last self-test failed"
>     + "smart-self-test-result"::"Last self-test was aborted"
>     + "smart-self-test-result"::"Last self-test was interrupted"
>     + "smart-self-test-result"::"Self-test in progress — %d%% remaining"
>     + "smart-self-test-result"::"Unknown (%s)"
>     + "volume-grid"::"Extended Partition"
>     + "volume-grid"::"Filesystem"
>     + "volume-grid"::"Free Space"
>     + "volume-grid"::"Partition %d"
>     + "volume-grid"::"Partition %d: %s"
>     + "volume-grid"::"Swap"
> 
> Note that this doesn't directly indicate a string freeze break, but it
> might be worth investigating.
> _______________________________________________
> gnome-i18n mailing list
> gnome-i18n gnome org
> http://mail.gnome.org/mailman/listinfo/gnome-i18n




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]