String additions to 'gnome-disk-utility.master'

[GNOME Status Pages <noreply gnome org>]

This is an automatic notification from status generation scripts on:
http://l10n.gnome.org.

There have been following string additions to module 'gnome-disk-utility.master':

+ "%d <span size=\"small\">(Worst:%d, Threshold: %d)</span>"
    + "%d hour"
    + "%d hours"
    + "%d minute"
    + "%d minutes"
    + "%d msec"
    + "%d second"
    + "%d seconds"
    + "%s (%s)"
    + "%s <span size=\"smaller\">(Read-Only)</span>"
    + "%s Block Device"
    + "%s Loop Device"
    + "%s ago"
    + "/etc/crypttab configuration data is malformed"
    + "A file named \"%s\" already exists.  Do you want to replace it?"
    + "All Files"
    + "All data on the partition will be lost"
    + "All data on the volume will be lost"
    + "All existing data will be lost"
    + "Are you sure you want to format the disk?"
    + "Are you sure you want to write the disk image to the device?"
    + "Cannot create a new partition. There are already four primary partitions."
    + "Cannot restore image of size 0"
    + "Changing the passphrase for this device, will also update the passphrase referenced by the <i>/etc/crypttab</i> file"
    + "Compatible with Linux systems"
    + "Compatible with all systems and devices"
    + "Compatible with modern systems and hard disks > 2TB"
    + "Compatible with most systems"
    + "Copying data from device <i>%s</i>..."
    + "Copying data to device <i>%s</i>..."
    + "Custom"
    + "DISK IS LIKELY TO FAIL SOON"
    + "Description"
    + "Disk Drives"
    + "Disk Image of %s (%s).img"
    + "Disk Images (*.img, *.iso)"
    + "Disk is OK, one attribute failed in the past"/"Disk is OK, %d attributes failed in the past"
    + "Disk is OK, one bad sector"/"Disk is OK, %d bad sectors"
    + "Disk is OK, one failing attribute is failing"/"Disk is OK, %d attributes are failing"
    + "Disks"
    + "Encrypted, compatible with Linux systems"
    + "Enter filesystem type"
    + "Error aborting SMART self-test"
    + "Error adding /etc/crypttab entry"
    + "Error adding new /etc/fstab entry"
    + "Error attaching disk image"
    + "Error changing passphrase"
    + "Error deleting loop device"
    + "Error determing size of file"
    + "Error determining size of device"
    + "Error ejecting media"
    + "Error formatting disk"
    + "Error formatting partition"
    + "Error locking encrypted device"
    + "Error mounting filesystem"
    + "Error opening device"
    + "Error opening file for reading"
    + "Error opening file for writing"
    + "Error reading from offset %"
    + "Error refreshing SMART data"
    + "Error removing /etc/crypttab entry"
    + "Error removing old /etc/fstab entry"
    + "Error retrieving configuration data"
    + "Error setting label"
    + "Error setting partition flags"
    + "Error setting partition name"
    + "Error setting partition type"
    + "Error starting SMART self-test"
    + "Error starting swap"
    + "Error stopping swap"
    + "Error unlocking encrypted device"
    + "Error unmounting filesystem"
    + "Error updating /etc/crypttab entry"
    + "Error updating /etc/crypttab"
    + "Error updating /etc/fstab entry"
    + "Error writing to backup image"
    + "Every time data is collected <span size=\"small\">(Online)</span>"
    + "Extended partition"
    + "Failure is a sign the disk exceeded its intended design life period (Old-Age)"
    + "Failure is a sign the disk exceeded its intended design life period <span size=\"small\">(Old-Age)</span>"
    + "Failure is a sign the disk will fail within 24 hours (Pre-Fail)"
    + "Failure is a sign the disk will fail within 24 hours <span size=\"small\">(Pre-Fail)</span>"
    + "Fair"
    + "Filesystem Root"
    + "For logical partitions"
    + "GPT"
    + "If checked, the loop device will be read-only. This is useful if you don't want the underlying file to be modified"
    + "LUKS + Ext4"
    + "Less than a minute"
    + "MBR / DOS"
    + "Matches any device with the given label"
    + "Matches partition %d of any device connected at the given port or address"
    + "Matches partition %d of the device with the given vital product data"
    + "Matches the device with the given UUID"
    + "Matches the given device"
    + "Matches the whole disk of any device connected at the given port or address"
    + "Matches the whole disk of the device with the given vital product data"
    + "No Media"
    + "No partitioning"
    + "No"
    + "OK"
    + "Only during off-line activities <span size=\"small\">(Not Online)</span>"
    + "Only the passphrase referenced by the <i>/etc/crypttab</i> file will be changed. To change the on-disk passphrase, use <i>Change Passphrase...</i>"
    + "Other Devices"
    + "SELF-TEST FAILED"
    + "SMART is not enabled"
    + "SMART is not supported"
    + "Select Disk Image to Attach"
    + "Self-test in progress — %d%% remaining"
    + "Set up _read-only loop device"
    + "Strong"
    + "The file already exists in \"%s\".  Replacing it will overwrite its contents."
    + "The selected image is %s bytes bigger than the device"
    + "The selected image is %s bytes smaller than the device"
    + "The strength of the passphrase"
    + "The system may not work correctly if this entry is modified or removed."
    + "This is the last primary partition that can be created."
    + "Threshold exceeded"
    + "Threshold not exceeded"
    + "Type"
    + "Unallocated Space (%s)"
    + "Updates"
    + "Weak"
    + "Will be created"
    + "Will be deleted"
    + "Yes"
    + "Yes, mounted at %s"
    + "_Attach"
    + "_Replace"
    + "_Restore"
    + "partition type"::"Unknown"
    + "smart-self-test-result"::"Last self-test completed successfully"
    + "smart-self-test-result"::"Last self-test did not complete"
    + "smart-self-test-result"::"Last self-test failed (electrical)"
    + "smart-self-test-result"::"Last self-test failed (handling)"
    + "smart-self-test-result"::"Last self-test failed (read)"
    + "smart-self-test-result"::"Last self-test failed (servo)"
    + "smart-self-test-result"::"Last self-test failed"
    + "smart-self-test-result"::"Last self-test was aborted"
    + "smart-self-test-result"::"Last self-test was interrupted"
    + "smart-self-test-result"::"Self-test in progress — %d%% remaining"
    + "smart-self-test-result"::"Unknown (%s)"
    + "volume-grid"::"Extended Partition"
    + "volume-grid"::"Filesystem"
    + "volume-grid"::"Free Space"
    + "volume-grid"::"Partition %d"
    + "volume-grid"::"Partition %d: %s"
    + "volume-grid"::"Swap"

Note that this doesn't directly indicate a string freeze break, but it
might be worth investigating.