Re: [Evolution] palm treo 600 sync



O look at that, sorry, I am currently running Fedora Core 4.  As for evo-pilot, no, I did have gnome-pilot and thought that was it.  I can't find a version suitable for me *sigh*, yum shows nothing,  and looking in rpmfind (http://rpmfind.net/linux/rpm2html/search.php?query=evolution-pilot&submit=Search+...) .

JPilot works fine, I get calendar, contacts, etc. all syncing perfect, but since I use evo daily, would much prefer that as opposed to a 2nd app like JPilot.

Side note, I did download the evolution-pilot-2.4.0-3.2.i586.rpm which is for SUSE and the missing dep's were huge, so before I start going crazy trying to satisfy them, I want to make sure I'm on the right track.

Thanks again ...

Lance
NewYork, NewYork

On Sun, 2005-11-27 at 10:14 +1100, Andrew Greig wrote:
Hi,
You haven't told us what distro and version you are using.  Have you
installed evolution-pilot?  I suspect not, because the conduits which
you are missing normally only turn up after it's installed.

To see if the kernel is handling the synch OK you could see how you get
on with JPilot.

Andrew Greig
Melbourne, Australia




On Fri, 2005-11-25 at 09:23 -0500, Techy wrote:
> ok, this is the biggie, I have (as you saw from the subject) a palm
> treo
> 600 which I want to sync with evo and have had no luck with.  The
> basics
> are;
> 
> HW: Dell Inspiron 300M
> Palm connecting via USB.
> 
> When I connect the 1st time, I do get a connect on the palm quick
> sync,
> clean-up and that's it.  message file shows:
> --------------------------------------------------------------------------
> Nov 23 11:01:52 vader kernel: drivers/usb/serial/usb-serial.c: USB
> Serial suppor t registered for Sony Clie 5.0
> Nov 23 11:01:52 vader kernel: visor 2-1:1.0: Handspring Visor / Palm
> OS
> converte r detected
> Nov 23 11:01:52 vader kernel: usb 2-1: Handspring Visor / Palm OS
> converter now attached to ttyUSB0
> Nov 23 11:01:52 vader kernel: usb 2-1: Handspring Visor / Palm OS
> converter now attached to ttyUSB1
> Nov 23 11:01:52 vader kernel: usbcore: registered new driver visor
> Nov 23 11:01:52 vader kernel: drivers/usb/serial/visor.c: USB
> HandSpring
> Visor /  Palm OS driver v2.1
> Nov 23 11:02:01 vader kernel: usb 2-1: USB disconnect, address 4
> ---------------------------------------------------------------------------
> If I try to re-sync I get:
> Nov 23 11:05:47 vader kernel: usb 2-1: Handspring Visor / Palm OS
> converter now attached to ttyUSB2
> Nov 23 11:05:47 vader kernel: usb 2-1: Handspring Visor / Palm OS
> converter now attached to ttyUSB3
> Nov 23 11:05:49 vader kernel: visor ttyUSB1: visor_write -
> usb_submit_urb(write bulk) failed with status = -19
> Nov 23 11:06:01 vader last message repeated 2 times
> Nov 23 11:06:02 vader kernel: usb 2-1: USB disconnect, address 5
> ---------------------------------------------------------------------------
> 
> One thing I noticed, in Tools/Pilot/Conduits I only see:
> Expense
> MAL
> MemoFile
> Sendmail
> Time
> (all of which are disabled except Memofile)
> 
> I thought a while back this is where I put contacts, calendar, to-do,
> etc. the things I really want to sync.
> 
> Also, if I do a pilot-xfer -L -p /tmp/pilot wait a sec, hit the sync
> button I get a connect success and it does list all the apps / files.
> And it currently sync's 100% with JPilot which is okay, but I use evo
> 100% and to swich apps for things like that are foolish.
> 
> Any help / direction is appreciated.
> 
> Lance 
> _______________________________________________
> Evolution-list mailing list
> Evolution-list gnome org
> http://mail.gnome.org/mailman/listinfo/evolution-list
Andrew Greig
ABN 52 219 423 734
15 Leslie Ave Boronia Vic 3155
0418 581 649
algreig bigpond net au




Yours faithfully

Andrew



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]