Re: [Ekiga-list] Ekiga 4.0.1 and Renavisio

[Eugen Dedu <eugen dedu univ-fcomte fr>]

Hi Samuel,

We can make some tests tomorrow if you wish, I have access to renavisio 
too.  Note that I will use the development code in order to allow to fix 
any issue which might appear.

Eugen

On 08/07/15 17:53, Samuel VISCAPI wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> Hi all,
>
> I managed to compile Ekiga 4.0.1 with H.263 support, with libav-0.8.17
> :) With this build I could join a Renavisio conference and have a
> short, rather sluggish (~15 FPS + stuttering sound) talk with my
> colleague...before the Raspberry PI 2 crashed ;)
>
> I'll try again later with some overclock and / or more memory
> dedicated to the GPU.
>
> Stay tuned !
>
> Cheers, Samuel
>
> Le 08/07/2015 12:54, Samuel VISCAPI a écrit :
> > Hi all,
> >
> > Thanks for your answers, I'll try to build Ekiga with H.263
> > support ASAP. By the way, is there a recommended version of libav
> > for that purpose ?
> >
> > @ Eugen: I built Opal 3.10.10 from sources, do I still need to
> > apply those Debian patches (on Raspbian/ARM) ?
> >
> > Cheers, Samuel
> >
> > Le 07/07/2015 17:15, Eugen Dedu a écrit :
> > > On 07/07/15 16:38, Samuel VISCAPI wrote:
> > > > -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
> > > >
> > > > Dear all,
> > > >
> > > > This is my first post to that mailing list :)
> > > >
> > > > I'd like to use Ekiga to participate in a conference hosted on
> > > >   Renavisio, the French education visioconferencing platform:
> > > >
> > > > https://visio.renater.fr/
> > > >
> > > > I managed to join the conference room using the SIP protocol.
> > > > I had to set DTMF mode to RFC 2833 in order to type in the
> > > > password though.
> > > >
> > > > Audio is working correctly, but video is not. I can't see my
> > > > colleague (in CC) who's connected to the same conference room,
> > > > and he doesn't see me either. The webcam is a Logitech C920,
> > > > which appears to be working just fine in the "echo test" room.
> > > > As for my colleague, he is using Scopia and the H.323
> > > > protocol:
> > > >
> > > > http://www.avaya.com/usa/product/avaya-scopia-desktop-and-mobile-app
> l
> > > >
> ica
> > > >
> > tions/#
> > > > By the way, I'm running Ekiga 4.0.1 compiled from sources on a
> > > >   Raspberry PI 2. I followed these instructions:
> > > >
> > > > http://wiki.ekiga.org/index.php/Compiling_Ekiga
> > > >
> > > > What am I doing wrong ?
> > > >
> > > > P.S: Damien told me it could be a video codec issue. So far,
> > > > only theora and h261 are available in the "Preferences" menu.
> > > > If need be, I could install libav/ffmpeg and libx264 then
> > > > recompile Ekiga.
> >
> > > Hi Samuel,
> >
> > > I would relaly love to make Ekiga work with Renavisio.  I plan
> > > to test it myself, but I am pretty busy at the moment.
> >
> > > I see at https://lpsc.in2p3.fr/trac/faq/wiki/Renavisio that the
> > > H263 codecs are needed.  You need libav (perhaps ffmpeg works
> > > too) for that. There is a patch (or two) you need to use, see
> > > https://sources.debian.net/src/opal/3.10.10~dfsg2-1/debian/patches/