Re: [Ekiga-list] Ekiga 4.0.1 and Renavisio

[Samuel VISCAPI <samuel viscapi univ-montp2 fr>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Hi all,

I managed to compile Ekiga 4.0.1 with H.263 support, with libav-0.8.17
:) With this build I could join a Renavisio conference and have a
short, rather sluggish (~15 FPS + stuttering sound) talk with my
colleague...before the Raspberry PI 2 crashed ;)

I'll try again later with some overclock and / or more memory
dedicated to the GPU.

Stay tuned !

Cheers, Samuel

Le 08/07/2015 12:54, Samuel VISCAPI a écrit :
> Hi all,
>
> Thanks for your answers, I'll try to build Ekiga with H.263
> support ASAP. By the way, is there a recommended version of libav
> for that purpose ?
>
> @ Eugen: I built Opal 3.10.10 from sources, do I still need to
> apply those Debian patches (on Raspbian/ARM) ?
>
> Cheers, Samuel
>
> Le 07/07/2015 17:15, Eugen Dedu a écrit :
> > On 07/07/15 16:38, Samuel VISCAPI wrote:
> > > -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
> > >
> > > Dear all,
> > >
> > > This is my first post to that mailing list :)
> > >
> > > I'd like to use Ekiga to participate in a conference hosted on
> > >  Renavisio, the French education visioconferencing platform:
> > >
> > > https://visio.renater.fr/
> > >
> > > I managed to join the conference room using the SIP protocol.
> > > I had to set DTMF mode to RFC 2833 in order to type in the
> > > password though.
> > >
> > > Audio is working correctly, but video is not. I can't see my 
> > > colleague (in CC) who's connected to the same conference room, 
> > > and he doesn't see me either. The webcam is a Logitech C920, 
> > > which appears to be working just fine in the "echo test" room.
> > > As for my colleague, he is using Scopia and the H.323
> > > protocol:
> > >
> > > http://www.avaya.com/usa/product/avaya-scopia-desktop-and-mobile-app
l
> > >
ica
> > >
> tions/#
> > > By the way, I'm running Ekiga 4.0.1 compiled from sources on a
> > >  Raspberry PI 2. I followed these instructions:
> > >
> > > http://wiki.ekiga.org/index.php/Compiling_Ekiga
> > >
> > > What am I doing wrong ?
> > >
> > > P.S: Damien told me it could be a video codec issue. So far, 
> > > only theora and h261 are available in the "Preferences" menu.
> > > If need be, I could install libav/ffmpeg and libx264 then
> > > recompile Ekiga.
>
> > Hi Samuel,
>
> > I would relaly love to make Ekiga work with Renavisio.  I plan
> > to test it myself, but I am pretty busy at the moment.
>
> > I see at https://lpsc.in2p3.fr/trac/faq/wiki/Renavisio that the 
> > H263 codecs are needed.  You need libav (perhaps ffmpeg works
> > too) for that. There is a patch (or two) you need to use, see 
> > https://sources.debian.net/src/opal/3.10.10~dfsg2-1/debian/patches/
>
> >  Kind regards, Eugen
>
> _______________________________________________ ekiga-list mailing
> list ekiga-list gnome org 
> https://mail.gnome.org/mailman/listinfo/ekiga-list

- -- 
Samuel VISCAPI
LUPM - UMR 5299
Université de Montpellier - Campus Triolet
Place Eugène Bataillon - 34095 Montpellier cedex 5
Bât. 13, bureau 5, 1er étage
+33 (0)4 67 14 93 32
samuel viscapi univ-montp2 fr
GPG: FB3E9039
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)

iF4EAREIAAYFAlWdR2UACgkQqjnQbvs+kDlk4wD/WXOLW9T+ykPrtSvvo1bApklL
BMOsgjg6O5KYRdbkzHYA/i8oU2HSnR8VLI4fwm+HKM0vNKAHDEmBQy3mec1WoFDm
=b7Hp
-----END PGP SIGNATURE-----