Re: [Ekiga-list] Microphone not detected only with ekiga

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

On 14/09/11 00:06, Joseph Dumont wrote:
> > I confirm that without being registered to ekiga.net, calling
> > 500 ekiga net does not work.  This might be your "problem" with the
> > microphone.
> >
> > > Furthermore, I do not see any problem with the microphone. The problem
> > > is that no connection is established. Is that right?
>
> I'm not so much worried about calling 500, it's more that I cannot make
> regular calls. Incoming calls can be answered and heard, but no outgoing
> sound is transmitted. I assume this means a connection is established
> though, no? The microphone is not muted in any way and records in other
> audio programs and is regularly used successfully with skype. Thanks for
> your help.

Yes, the connection is established.

In this case send us a -d 4 output when an incoming call arrives and you 
receive sound and you do not send any sound.

> > > > > > ekiga -d 4 output is posted here.
> > > > > > <http://www.4shared.com/document/RF_HTmAa/output.html>
> > > > > Please use a service which does not force to wait, such as dl.free.fr or
> > > > > pastebin.
> > > > >
> > > > > Looking at your output, I see that the communication is not established,
> > > > > is that right? Why do you say that you hear the audio?
> > > > >
> > > > > In the above log I also see that you are not registered to ekiga.net,
> > > > > and I wonder if it is possible to cal 500 ekiga net without being
> > > > > registered (I cannot test right now).
> > > > >
> > > > > > On 08/25/2011 07:28 AM, ekiga-list-request gnome org wrote:
> > > > > > > > Hello,
> > > > > > > > > I've just installed Ekiga 3.2.7 on OpenSuse 11.4,
> > > > > > > > > 2.6.37.1-1.2-desktop,
> > > > > > > > > on a Thinkpad T410 (single audio combo jack).
> > > > > > > > >
> > > > > > > > > I've followed the Audio Setup page, set all audio devices to the
> > > > > > > > > Default
> > > > > > > > > (PTLIB/ALSA) (and later everything else just to check), I
> > > > > > > > > confirmed that
> > > > > > > > > my ALSA configuration was working properly as both echo tests
> > > > > > > > > functioned
> > > > > > > > > flawlessly:
> > > > > > > > >
> > > > > > > > > $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D
> > > > > > > > > plughw:0,0
> > > > > > > > > -c 1 -r 8000 -f S16_LE -
> > > > > > > > > $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D
> > > > > > > > > plughw:0,0
> > > > > > > > > -c 1 -r 16000 -f S16_LE -
> > > > > > > > >
> > > > > > > > > But I am unable to perform an echo test within Ekiga. I can receive
> > > > > > > > > calls and hear the audio, but the microphone will not pick
> > > > > > > > > anything up.
> > > > > > > > > Looking at other archives, I didn't see a solution that worked
> > > > > > > > > for me.
> > > > > > > > >
> > > > > > > > > More info that might be useful:
> > > > > > > > > $ alsamixer
> > > > > > > > > tells me that Master and Capture are both 100%
> > > > > > > > >
> > > > > > > > > $/sbin/lspci | grep Aud
> > > > > > > > > 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
> > > > > > > > > High Definition Audio (rev 06)
> > > > > > > > >
> > > > > > > > > The codecs are set to their defaults: Speex, PCMU, PCMA, silence
> > > > > > > > > detection and echo cancelation are not enabled.
> > > > > > > > >
> > > > > > > > > The same headpiece performs under skype.
> > > > > > > > >
> > > > > > > > > I'm happy to send any other information.
> > > > > > > Send us the -d 4 output when calling 500 ekiga net and when you speak
> > > > > > > you do not ehar yourself.