Re: [Ekiga-list] audio input not working



On 14/03/11 19:19, Giorgio wrote:
Il 14/03/2011 18:17, Eugen Dedu ha scritto:
On 13/03/11 19:43, Giorgio wrote:
When I run echo test I hear the message but I get no echo of my voice.
Same during call: I hear the voice but my friend don't hear me.

Of course my hardware works normally with others SW. In Windows 7 Ekiga
audio works with same hardware.

OS: Linux Mandriva 2010.2 64 bit,
Ekiga 3.2.6

You need to send us the debug output (-d 4).
The file has been created during the following operations:

1) start Ekiga from terminal with this command/ekiga -d 4
2>ekiga_debug_1.txt/
2) wait till opening is complete
3) call echo test
4) wait end of echo test message
5) speak several times into microphone
6) close Ekiga

hope it's what you asked for.
Attached you'll find the compressed version of file.

Good.  I see:
2011/03/14 18:36:59.831 0:35.151 Pool:0x55364710 ALSA Got volume 24536
and
2011/03/14 18:36:59.857 0:35.178 Pool:0x55364710 ALSA Got volume 47113

This sounds strange, are your audio volume ok?

=====

But the real error comes in my opinion from the following:
2011/03/14 18:37:02.074 0:37.395 Media Patch:0x2dd1d710 RTP_UDP Session 1, write error on data port (105): No buffer space available 2011/03/14 18:37:02.075 0:37.395 Media Patch:0x2dd1d710 Patch WriteFrame failed 2011/03/14 18:37:02.075 0:37.395 Media Patch:0x2dd1d710 Patch Thread ended because all sink writes failed failed 2011/03/14 18:37:02.075 0:37.395 Media Patch:0x2dd1d710 Patch Thread ended for Patch OpalAudioMediaStream-Source-PCM-16 -> OpalRTPMediaStream-Sink-G.711-ALaw-64k

2011/03/14 18:37:02.134 0:37.454 Media Patch:0x2dc5a710 RTP_UDP Session 2, write error on data port (105): No buffer space available 2011/03/14 18:37:02.134 0:37.454 Media Patch:0x2dc5a710 Patch WriteFrame failed 2011/03/14 18:37:02.134 0:37.454 Media Patch:0x2dc5a710 Patch Thread ended because all sink writes failed failed 2011/03/14 18:37:02.134 0:37.454 Media Patch:0x2dc5a710 Patch Thread ended for Patch OpalVideoMediaStream-Source-YUV420P -> OpalRTPMediaStream-Sink-H.261

The error appears in src/rtp/rtp.cxx:
    PTRACE(1, "RTP_UDP\tSession " << sessionID
<< ", write error on " << (toDataChannel ? "data" : "control") << " port ("
           << socket.GetErrorNumber(PChannel::LastWriteError) << "): "
           << socket.GetErrorText(PChannel::LastWriteError));

This means that it cannot write on the network socket. Do you have anything special with the access to the network on your machine?!

--
Eugen


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]