ekiga -d 4 output is posted here.|
Thanks again for your help!
On 08/25/2011 07:28 AM, ekiga-list-request gnome org wrote:
Hello,I've just installed Ekiga 3.2.7 on OpenSuse 11.4, 220.127.116.11-1.2-desktop, on a Thinkpad T410 (single audio combo jack). I've followed the Audio Setup page, set all audio devices to the Default (PTLIB/ALSA) (and later everything else just to check), I confirmed that my ALSA configuration was working properly as both echo tests functioned flawlessly: $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE - $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 16000 -f S16_LE - But I am unable to perform an echo test within Ekiga. I can receive calls and hear the audio, but the microphone will not pick anything up. Looking at other archives, I didn't see a solution that worked for me. More info that might be useful: $ alsamixer tells me that Master and Capture are both 100% $/sbin/lspci | grep Aud 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) The codecs are set to their defaults: Speex, PCMU, PCMA, silence detection and echo cancelation are not enabled. The same headpiece performs under skype. I'm happy to send any other information.Send us the -d 4 output when calling 500 ekiga net and when you speak you do not ehar yourself.