Re: [Ekiga-list] Fix for Ekiga not re-registering
- From: bnc <bnc netspeed com au>
- To: ekiga-list gnome org
- Subject: Re: [Ekiga-list] Fix for Ekiga not re-registering
- Date: Tue, 5 Jan 2010 15:55:27 +1000
I always change the port too.
I normally go into gconf-editor and set the port to 5066.
When starting ekiga it still uses port 5060.
It then seems to allocate the next port up everytime it reregisters.
Now if you have a limited number of ports available then it runs out.
It appears then that ekiga just keeps retrying until one of the used
ports times out and it is able to register again.
I checked this by looking at the display of internet sessions on my
router and having the edit accounts window open.
You can watch the ports getting allocated and the account going in and
out of registration. To be clear the ports are not being allocated
because I am making calls, they just get allocated on a regular basis.
So why does ekiga now ignore the gconf-editor setting, and why does it
keep allocating a new port. At least it should get rid of the old one.
Note I have my account timeout set to 3600.
On Mon, 4 Jan 2010 19:15:39 -0500
Eugene Kanter <ybkanter gmail com> wrote:
> I always change 5060 to some other value and still get failed
> re-registration with sipphone sometimes. Will keep monitoring.
> 2010/1/4 Jérôme Trullen <jerome trullen etoilediese fr>:
> > Hello,
> > I just tcpdump'ed the registration :
> > Ekiga sends : Contact: <sip:me there com>
> > Our NAT router changes it in : Contact: <sip:me there com:1048>
> > The registrar Yate answers : Contact: <sip:me there com:1048>
> > Our NAT router changes it in : Contact: <sip:me there com:5060>
> > So Ekiga sends Contact: <sip:me there com> and receives an OK with
> > Contact: <sip:me there com:5060> Conclusion, the problem is not the
> > registrar but the port translation done by the router.
> > To fix that without any modification of code, one just have to ask
> > Ekiga to use a port different from 5060 (ie. 5061) so that it has
> > to say it in the contact field. Is there any equivalent to
> > gconf-editor for Windows ?
> > Regards,
> > --
> > Jérôme Trullen
> > Téléphone : +33 567733803
> > SIP : jerome trullen etoilediese fr
> > _______________________________________________
> > ekiga-list mailing list
> > ekiga-list gnome org
> > http://mail.gnome.org/mailman/listinfo/ekiga-list
> ekiga-list mailing list
> ekiga-list gnome org
] [Thread Prev