Re: [Ekiga-list] Unable to run Ekiga
- From: Bret Busby <bret busby net>
- To: Ekiga mailing list <ekiga-list gnome org>
- Subject: Re: [Ekiga-list] Unable to run Ekiga
- Date: Fri, 19 Feb 2010 16:47:16 +0800 (WST)
On Fri, 19 Feb 2010, y0017566 wrote:
Bret Busby schrieb:
Hello.
In trying to run Ekiga, I have tried with both my installation on Ubuntu
8.04, and Debian 5, on this system (HP/Compaq NX5000 "laptop").
I have tried with both a Logitech Communicate STX webcam, and a Logitech
C300 webcam.
With the C300, on Debian 5, the top error dialogue box stated:
"Error while starting the listener for the SIP protocol
You will not be able to receive incoming SIP calls. Please check that no
other program is already running on the port used by Ekiga."
The next error dialogue box stated:
"Error while opening video device UVC Camera (046d:0805)
A moving logo will be transmitted during calls. Notice that you can always
transmit a given image or the moving logo by choosing "Picture" as video
plugin and "MovingLogo" or "StaticPicture" as device.
Your video driver doesn't support the requested video format."
Both webcams have previously been able to achieve the test call to Ekiga,
successfully (but, not for me to be able to make or receive a call other
than to the Ekiga test call facility).
Now, it does not work at all.
Any ideas?
Thank you in anticipation.
--
Bret Busby
Armadale
West Australia
..............
"So once you do know what the question actually is,
you'll know what the answer means."
- Deep Thought,
Chapter 28 of Book 1 of
"The Hitchhiker's Guide to the Galaxy:
A Trilogy In Four Parts",
written by Douglas Adams,
published by Pan Books, 1992
....................................................
_______________________________________________
ekiga-list mailing list
ekiga-list gnome org
http://mail.gnome.org/mailman/listinfo/ekiga-list
Hello,
have you tried the video4linux v2 driver?
Does the cam run with other image-grabbing applications installed on your
system?
What is said about your account in Properties->Accounts?
I got this message too after I had run the Configuration-Druid. The account
was set inactive under Properties->Accounts
Cheers, Chris
_______________________________________________
I believed that I had tried the V4L2 driver.
However, when I went through the configuration again, and selected V4L2,
I got moving picture of my ugly face.
Thanks (real thanks, not "thanks for making me look at my ugly face" :)
).
However, I still get the error
"Error while starting the listener for the SIP protocol
You will not be able to receive incoming SIP calls. Please check that
no other program is already running on the port used by Ekiga."
--
Bret Busby
Armadale
West Australia
..............
"So once you do know what the question actually is,
you'll know what the answer means."
- Deep Thought,
Chapter 28 of Book 1 of
"The Hitchhiker's Guide to the Galaxy:
A Trilogy In Four Parts",
written by Douglas Adams,
published by Pan Books, 1992
....................................................
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]