Re: [Ekiga-devel-list] Incoming Call Notifier

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

On 27/12/11 16:12, uahmed wrote:
> i am compilin it on linux , i followed all the instructions like this
>
> http://wiki.ekiga.org/index.php/Building_Ekiga_for_Windows
>
> i make a new folder name "ek2" and run all the instructions
>
> i do changes at this file
>
> /home/gnome/ek2/src/ekiga/src/gui/main_window.cpp

You need to type make in /home/gnome/ek2 so that it creates a first 
executable.

Afterwards, you make changes in /home/gnome/ek2/ekiga (not in src 
directory!)

cd /home/gnome/ek2/ekiga
make
cd ..
make

The executable is in /home/gnome/ek2/dist.

Note: make the modification you made in src/ back again, so that it is 
the same as the original.

> later i come to this path
>
> /home/gnome/ek2
>
> and run "sudo make"
>
> it create an executable file of ekiga at this path
>
> /home/gnome/ek2/dist
>
> but changes are not made when i run the new executable file of ekiga . Can
> you please tell me where i am wrong .
>
> and for making focus of ekiaga incoming call alert i think we can do it by
> creating new gtk window irrespect of poping up dialouge what you say ?
>
> On Tue, Dec 27, 2011 at 2:42 PM, Eugen Dedu<Eugen Dedu pu-pm univ-fcomte fr
> > wrote:
>
> > On 27/12/11 01:56, uahmed wrote:
> >
> > > Thanks for the reply . Agree from the code it shows that it should give
> > > focus one more thing when i compile ekiga and see the source code at
> > > particular line it has one more function called which is "
> > > gtk_window_set_focus_on_map"
> > >
> > >
> > >    gtk_window_set_transient_for (GTK_WINDOW (incoming_call_popup),
> > >                                  GTK_WINDOW (mw));
> > >    // do not steal the focus, to avoid that user take the call by
> > > inadvertently pressing enter in another application
> > >    gtk_window_set_focus_on_map (GTK_WINDOW (incoming_call_popup), FALSE);
> > >
> > >    gtk_widget_show_all (incoming_call_popup);
> > >
> > > where as we can not find it here
> > > http://git.gnome.org/browse/**ekiga/tree/src/gui/main.cpp?h=**
> > > gnome-2-26#n2738<http://git.gnome.org/browse/ekiga/tree/src/gui/main.cpp?h=gnome-2-26#n2738>
> >
> > This is because you look for ekiga master (development) branch, while I
> > wrote you the address of gnome-2-26 branch, where ekiga 3.2.7 lies.
> > gtk_window_set_focus_on_map was introduced recently, and is not found on
> > 3.2.7.  Anyway, the function you wrote about is about the focus, and has
> > nothing to do with raising the window or not.
> >
> >
> >   and please correct me if i do any changes in code then to recompile it i
> > > only need to run "make" at the directory where i have all files ?
> >
> > If you make modifications in ekiga code in Windows, you need to:
> > - go to ekiga directory and run make
> > - go to parent directory of ekiga directory (cd ..) and run make
> >
> >   On Wed, Dec 21, 2011 at 12:55 AM, Eugen Dedu<
> > > Eugen Dedu pu-pm univ-fcomte.**fr<Eugen Dedu pu-pm univ-fcomte fr>>
> > >   wrote:
> > >
> > >   I fear that this is a problem in gtk or even not a bug at all (if Windows
> > > > does not take that into account).  Ekiga requests that window to be
> > > > risen,
> > > > but operating systems are not obliged to take it into account.
> > > >
> > > > Ekiga does that with:
> > > >   gtk_window_set_keep_above (GTK_WINDOW (incoming_call_popup), TRUE);
> > > >   gtk_window_set_urgency_hint (GTK_WINDOW (mw), TRUE);
> > > > (found at http://git.gnome.org/browse/****ekiga/tree/src/gui/main.cpp?h=
> > > > ****<http://git.gnome.org/browse/**ekiga/tree/src/gui/main.cpp?h=**>
> > > > gnome-2-26#n2736<http://git.**gnome.org/browse/ekiga/tree/**
> > > > src/gui/main.cpp?h=gnome-2-26#**n2736<http://git.gnome.org/browse/ekiga/tree/src/gui/main.cpp?h=gnome-2-26#n2736>
> > > > >
> > > > )
> > > > For help on these functions, look at http://developer.gnome.org/**
> > > > gtk/unstable/GtkWindow.html<ht**tp://developer.gnome.org/gtk/**
> > > > unstable/GtkWindow.html<http://developer.gnome.org/gtk/unstable/GtkWindow.html>
> > > > >
> > > >
> > > >
> > > >
> > > > On 15/12/11 20:08, uahmed wrote:
> > > >
> > > >   Yes its like that
> > > > > On Thu, Dec 15, 2011 at 11:07 AM, Eugen Dedu<
> > > > > Eugen Dedu pu-pm univ-fcomte.****fr<Eugen Dedu pu-pm univ-**fcomte.fr<Eugen Dedu pu-pm univ-fcomte fr>
> > > > > > >
> > > > >
> > > > >   wrote:
> > > > >
> > > > >   On 15/12/11 19:59, uahmed wrote:
> > > > >
> > > > > >   Ok let me explain in detail .
> > > > > >
> > > > > > > When i get the call on ekiga . I do get a new window but it is not
> > > > > > > focused
> > > > > > > and dont come above of the other windows .Like if i get a call on
> > > > > > > skype
> > > > > > > i
> > > > > > > can see a small pop up window at the right side and its visible and
> > > > > > > stay
> > > > > > > above of all the windows where as in ekiga i dont get the incoming
> > > > > > > call
> > > > > > > alert window as focused and do not come above of all the active
> > > > > > > windows
> > > > > > > .
> > > > > > >
> > > > > > >
> > > > > > >   So sometimes (not always) the window is not raised (appears above
> > > > > > all the
> > > > > > other windows), is that right?
> > > > > >
> > > > > >   On Thu, Dec 15, 2011 at 10:33 AM, Eugen Dedu<
> > > > > >
> > > > > >   Eugen Dedu pu-pm univ-fcomte.******fr<Eugen Dedu pu-pm univ-****
> > > > > > > fcomte.fr<http://fcomte.fr><Eugen.Dedu@pu-pm.**univ-fcomte.fr<Eugen Dedu pu-pm univ-fcomte fr>
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > >
> > > > > > >   wrote:
> > > > > > >
> > > > > > >   On 13/12/11 16:25, uahmed wrote:
> > > > > > >
> > > > > > >
> > > > > > > >   Ok is there any other way like i compile the source code at my end
> > > > > > > > and
> > > > > > > >
> > > > > > > >   do
> > > > > > > > > changes and then make executable file ? I find some parameters of
> > > > > > > > > windows
> > > > > > > > > like size of message,vidoe call window in linux and i can change the
> > > > > > > > > size
> > > > > > > > > through gconf editor in linux but there too i dont find the incoming
> > > > > > > > > call
> > > > > > > > > alert window parameters . any help on this will be grateful
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >   I do not understand very well what you say.  Are you able to
> > > > > > > > > compile
> > > > > > > > or
> > > > > > > > not?
> > > > > > > >
> > > > > > > > Could you also explain better what you wish?  Maybe it is a bug...
> > > > > > > >
> > > > > > > >   On Tue, Dec 13, 2011 at 5:59 AM, Eugen Dedu<Eugen Dedu pu-pm univ-
> > > > > > > > **
> > > > > > > >
> > > > > > > >   fcomte.fr<Eugen.Dedu@pu-pm.****u**niv-fcomte.fr<http://univ-**
> > > > > > > > fcomte.fr<http://univ-fcomte.fr>>
> > > > > > > >
> > > > > > > > > <Eugen.Dedu@pu-**pm.univ-**fcomte.fr<http://pm.univ-fcomte.fr><
> > > > > > > > > Eugen.Dedu@pu-pm.**univ-fcomte.fr<Eugen Dedu pu-pm univ-fcomte fr>
> > > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > >    wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > >    On 13/12/11 14:56, uahmed wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >    sometime the incoming call window dont raise and its position is
> > > > > > > > > > also
> > > > > > > > > >
> > > > > > > > > >   not
> > > > > > > > > >
> > > > > > > > > > > fixed , and what i want that i make the incoming call notifier as
> > > > > > > > > > > centralize with increased window size and focused it . Can i do
> > > > > > > > > > > that
> > > > > > > > > > > for
> > > > > > > > > > > Windows Ekiga?
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >   Not for the moment, sorry.
> > > > > > > > > >
> > > > > > > > > >   On Tue, Dec 13, 2011 at 5:45 AM, Eugen Dedu<Eugen Dedu pu-pm univ-
> > > > > > > > > > **
> > > > > > > > > >
> > > > > > > > > >   fcomte.fr<Eugen.Dedu@pu-pm.******u**niv-fcomte.fr<http://univ-**
> > > > > > > > > > **
> > > > > > > > > > fcomte.fr<http://univ-fcomte.**fr<http://univ-fcomte.fr>>>
> > > > > > > > > >
> > > > > > > > > >   <Eugen.Dedu@pu-**pm.univ-**fco**mte.fr<http://fcomte.fr><
> > > > > > > > > > > http://pm.univ-fcomte.**fr<http://pm.univ-fcomte.fr>><
> > > > > > > > > > > Eugen.Dedu@pu-pm.**univ-**fcomte.fr<http://univ-fcomte.fr><
> > > > > > > > > > > Eugen.Dedu@pu-pm.**univ-fcomte.fr<Eugen Dedu pu-pm univ-fcomte fr>
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >    wrote:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >    On 12/12/11 09:53, uahmed wrote:
> > > > > > > > > > >
> > > > > > > > > > >    Hi ,
> > > > > > > > > > >
> > > > > > > > > > > >   Can i change the font and size of incoming call notifier window
> > > > > > > > > > > > ?
> > > > > > > > > > > >
> > > > > > > > > > > > > I
> > > > > > > > > > > > > will
> > > > > > > > > > > > > be
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >   No.
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >   Generally, it is not possible to change the font of one one
> > > > > > > > > > > > window
> > > > > > > > > > > > of
> > > > > > > > > > > > an
> > > > > > > > > > > > application.  The size could be modified if it would be taken
> > > > > > > > > > > > into
> > > > > > > > > > > > account
> > > > > > > > > > > > in ekiga, which is not actually the case.  Why do you need that?