Re: [Ekiga-devel-list] Sometimes Ekiga is not binding to the correct interface
- From: Damien Sandras <dsandras seconix com>
- To: Ekiga development mailing list <ekiga-devel-list gnome org>
- Subject: Re: [Ekiga-devel-list] Sometimes Ekiga is not binding to the correct interface
- Date: Thu, 15 Oct 2009 10:19:01 +0200
Le jeudi 15 octobre 2009 à 10:03 +0200, Alexandre Belloni a écrit :
On Wed, Oct 14, 2009 at 07:45:49PM +0200, Damien Sandras wrote :
> Ekiga 3 binds to all interfaces.
>
Yeah ok but it is not sending its RTP on the correct one. You can see in
the traces that it is binding to 192.168.18.109 instead of 192.168.1.86.
2009/10/14 14:02:45.591 0:08.722 CallSetup:0xb39a0b90 OpalUDP
Setting interface to 192.168.18.109%eth0
2009/10/14 14:02:45.591 0:08.722 CallSetup:0xb39a0b90 SIP
Transaction timers set: retry=0.500, completion=1:00.000
2009/10/14 14:02:45.591 0:08.722 CallSetup:0xb39a0b90 OpalCon
OnSetUpConnectionCall[j5b3316471]-EP<sip>[5c242127-27b7-de11-93d0-00215ae72d5f]
2009/10/14 14:02:45.591 0:08.722 CallSetup:0xb39a0b90 OpalEP
OnSetUpConnection
Call[j5b3316471]-EP<sip>[5c242127-27b7-de11-93d0-00215ae72d5f]
2009/10/14 14:02:45.591 0:08.722 CallSetup:0xb39a0b90 PWLib
Ended thread 0xa279708 CallSetup:0xb39a0b90
2009/10/14 14:02:45.592 0:08.723 Opal Liste...0xb52beb90 OpalUDP
Binding to interface: 192.168.18.109:5060
Then, the sip phone will either reject the call because it can't route
any packets to 192.168.18.109 or simply not have audio.
That's because the remote server accepts it. If it can't relay RTP, it should reject the INVITE request with
unroutable RTP addresses.
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]