Re: [Ekiga-devel-list] cannot receive incomming calls after Ekiga runs for a minute
- From: Damien Sandras <dsandras seconix com>
- To: Ekiga development mailing list <ekiga-devel-list gnome org>
- Subject: Re: [Ekiga-devel-list] cannot receive incomming calls after Ekiga runs for a minute
- Date: Sat, 30 Sep 2006 11:12:51 +0200
Le vendredi 29 septembre 2006 à 13:09 -0400, Jonathon Conte a écrit :
> I wrote about this recently on the ekiga-users list but thought that I would
> mention it here as well in case others have ideas.
>
> I am running Ekiga v2.0.3 on the Ubuntu development release of Edgy Eft. I
> am trying to use BroadVoice (a US SIP provider) with Ekiga and have been
> experiencing problems with incomming telephone calls. Ekiga is able to
> receive inbound calls for about the first minute that it is running. I have
> been able to accept up to 6 calls within this time frame without problems.
> After the first minute, Ekiga gives no indication of inbound calls and the
> calls are sent immediately to voicemail. Even if no inbound calls are made
> during the first minute, Ekiga still ignores inbound calls after running for
> a minute. If Ekiga is restarted, the symptoms are the same.
>
> I don't have any problems if I use BroadVoice with another softphone so I am
> under the assumption that my SIP provider and hardware are working
> correctly.
>
> Below is a link to Ekiga's debug output. In this example, I tried to place a
> call to Ekiga after it had been running for a minute but the call went
> directly to voicemail:
>
> http://pastebin.ca/186151
>
> The registration timeout in the above output seems unusual. Incidentally, I
> do have the registration timeout set to 3600 in Ekiga:
>
> jconte peregrine:~/ekiga$ grep -i '^Expires' ekiga-no-inbound3
> Expires: 3600
> Expires: 3600
> Expires: 3600
> Expires: 30
> Expires: 3600
> Expires: 3600
> Expires: 30
> Expires: 30
> Expires: 30
> Expires: 30
> Expires: 0
>
That's Broadvoice which is decreasing the expire time to 30.
I examined your log trace and I see that you are behind NAT, but you
have not enabled STUN support.
Any specific reason?
> Please let me know if there is additional information that I could provide
> to help figure this out. Thanks.
>
> Jonathon
>
>
> _______________________________________________
> Ekiga-devel-list mailing list
> Ekiga-devel-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
--
_ Damien Sandras
(o-
//\ Ekiga Softphone: http://www.ekiga.org/
v_/_ FOSDEM 2006 : http://www.fosdem.org/
SIP Phone : sip:dsandras ekiga net
sip:600000 ekiga net
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]