[chronojump-docs] minor fix

[Xavier Padullés <xpadulles src gnome org>]

commit 22a70c128871710575e80c037af0841f2c2bfd51
Author: Xavier Padullés <x padulles gmail com>
Date:   Wed Oct 9 15:31:06 2019 +0200

    minor fix

 #chronojump_manual_en.lyx# | 14831 -------------------------------------------
 chronojump_manual_en.lyx   |   257 +-
 chronojump_manual_en.lyx~  |    54 +
 3 files changed, 150 insertions(+), 14992 deletions(-)
---
diff --git a/chronojump_manual_en.lyx b/chronojump_manual_en.lyx
index c4ca299..0827383 100644
--- a/chronojump_manual_en.lyx
+++ b/chronojump_manual_en.lyx
@@ -9327,7 +9327,68 @@ All the Chronojump sets can be edited.
 \end_layout
 
 \begin_layout Standard
-If you want to change
+If you want to change the athlete or the comment associated to the set click
+ on the load button 
+\begin_inset Graphics
+       filename images/ForceSensor/Load-Set-Button.png
+       scale 50
+
+\end_inset
+
+ and in the dialog that will be appear click on Edit.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Graphics
+       filename images/ForceSensor/Edit-Set_en.png
+       scale 50
+
+\end_inset
+
+
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Edit the athlete or comment
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you want to change the test type of a set, la laterality or the signal
+ treatment, load first the set, change the desired parameter and click on
+ recalculate 
+\begin_inset Graphics
+       filename images/ForceSensor/Recalculate_en.png
+       scale 50
+
+\end_inset
+
+.
 \end_layout
 
 \begin_layout Subsection
@@ -9526,132 +9587,6 @@ The RFD refers to Rate of Force Development.
  time.
 \end_layout
 
-\begin_layout Paragraph
-Taring and configuring the force sensor
-\end_layout
-
-\begin_layout Standard
-Due to the analog nature of the force sensor, this must be tared and calibrated.
-\end_layout
-
-\begin_layout Paragraph
-Taring
-\end_layout
-
-\begin_layout Standard
-The taring process consists in indicating at which state the sensor should
- register a force of zero Newtons.
-\end_layout
-
-\begin_layout Standard
-To perform this process put the sensor in a horizontal and stable surface
- and, without supporting any external force apart from the weight.
- Then press the button 
-\emph on
-Tare.
- 
-\emph default
-Chronojump will register for a few seconds and save the results.
-\end_layout
-
-\begin_layout Standard
-
-\lang spanish
-\begin_inset Float figure
-placement H
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\noindent
-\align center
-
-\lang spanish
-\begin_inset Graphics
-       filename /home/xpadulles/chronojump-docs/images/ForceSensor/Tare.JPG
-       lyxscale 25
-       scale 10
-
-\end_inset
-
-
-\begin_inset Caption Standard
-
-\begin_layout Plain Layout
-Taring the force sensor
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Paragraph
-Calibration
-\end_layout
-
-\begin_layout Standard
-The calibration consists in stablishing a lineal relationship between the
- electrical signal of the sensor and the real force.
- This relation could change in function of the sensor, temperature, humidity...
- For this reason it is recommended to calibrate once per session.
- By default Chronojump will use a generic calibration.
-\end_layout
-
-\begin_layout Standard
-To perform the calibration, in Chronojump enter the mass in kilograms of
- an object with a known weight.
- Tie this object to the force sensor and lift it making the sensor to hold
- all the weight.
-\lang spanish
-
-\begin_inset Float figure
-placement H
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\noindent
-\align center
-
-\lang spanish
-\begin_inset Graphics
-       filename /home/xpadulles/chronojump-docs/images/ForceSensor/Calibrate.png
-       lyxscale 33
-       scale 12.5
-
-\end_inset
-
-
-\begin_inset Caption Standard
-
-\begin_layout Plain Layout
-Force sensor calibration
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-The closer the weight is to the force you are going to perform in your tests,
- the more precision you will have with this calibration.
- Once you have the load lifted and stable, click on the calibrate button.
-\end_layout
-
 \begin_layout Paragraph
 Configuring the maximum isometric force test
 \end_layout
@@ -11913,40 +11848,6 @@ Encoder
 Encoder analyze tab
 \end_layout
 
-\begin_layout Standard
-\begin_inset Float figure
-placement H
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Graphics
-       filename images/encoder-manual-images/analyze.png
-       scale 50
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\begin_inset Caption Standard
-
-\begin_layout Plain Layout
-Analyze tab
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
 \begin_layout Standard
 There are four modes of analysis:
 \end_layout
@@ -12544,6 +12445,40 @@ The analysis starts when user click in “Analyse”.
  each save button in the lower right corner.
 \end_layout
 
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Graphics
+       filename images/encoder-manual-images/analysis_table_en.png
+       scale 25
+
+\end_inset
+
+
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Data table
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
 \begin_layout Chapter
 Report and export in jumps and races
 \end_layout
diff --git a/chronojump_manual_en.lyx~ b/chronojump_manual_en.lyx~
index e802623..c4ca299 100644
--- a/chronojump_manual_en.lyx~
+++ b/chronojump_manual_en.lyx~
@@ -9264,6 +9264,60 @@ Subsequently, in the analysis you can analyze the average error between
 Creation and edition of the test types
 \end_layout
 
+\begin_layout Standard
+You can edit or create as many tests as you want clicking on 
+\begin_inset Graphics
+       filename /home/xpadulles/chronojump-docs/images/ForceSensor/Edit-Test-Button.png
+       scale 50
+
+\end_inset
+
+and
+\begin_inset Graphics
+       filename /home/xpadulles/chronojump-docs/images/ForceSensor/Create-Test-Button.png
+       scale 50
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Graphics
+       filename images/ForceSensor/Create-Exercise-01_en.png
+       scale 50
+
+\end_inset
+
+
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Creation/Edition of a test type
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
 \begin_layout Subsection
 Set edition
 \end_layout