[chronojump] automatic -> multitest on firmware and firmwarecord

[Xavier de Blas <xaviblas src gnome org>]

commit 9212380e5f75d02152ea9f4f19b948e1618de4b6
Author: Xavier de Blas <xaviblas gmail com>
Date:   Thu Sep 18 14:56:30 2014 +0200

    automatic -> multitest on firmware and firmwarecord

 ...-automatic.c => chronopic-firmware-multitest.c} |    0
 .../chronopic-firmware-c/howto_compile.txt         |    7 +-
 .../chronopic-firmware-automatic.hex               |  132 --------------------
 .../chronopic-firmware-multitest.hex}              |    0
 .../chronopic-firmwarecord.in                      |   10 +-
 5 files changed, 11 insertions(+), 138 deletions(-)
---
diff --git a/chronopic-firmware/chronopic-firmware-c/chronopic-firmware-automatic.c 
b/chronopic-firmware/chronopic-firmware-c/chronopic-firmware-multitest.c
similarity index 100%
rename from chronopic-firmware/chronopic-firmware-c/chronopic-firmware-automatic.c
rename to chronopic-firmware/chronopic-firmware-c/chronopic-firmware-multitest.c
diff --git a/chronopic-firmware/chronopic-firmware-c/howto_compile.txt 
b/chronopic-firmware/chronopic-firmware-c/howto_compile.txt
index 52430d7..4c8e3c8 100644
--- a/chronopic-firmware/chronopic-firmware-c/howto_compile.txt
+++ b/chronopic-firmware/chronopic-firmware-c/howto_compile.txt
@@ -1,6 +1,11 @@
 sdcc -mpic14 -p16f876a -Wl-m -Wl-ainhx8m chronopic-firmware-4MHz.c
 sdcc -mpic14 -p16f876a -Wl-m -Wl-ainhx8m chronopic-firmware-20MHz.c
-sdcc -mpic14 -p16f876a -Wl-m -Wl-ainhx8m chronopic-firmware-automatic.c
+
+#multitest firmware
+sdcc -mpic14 -p16f876a -Wl-m -Wl-ainhx8m chronopic-firmware-multitest.c
+cp chronopic-firmware-multitest.hex ../chronopic-firmwarecord/.
+
+
 
 then record with chronopic-firmwarecord
 
diff --git a/chronopic-firmware/chronopic-firmware-c/chronopic-firmware-automatic.hex 
b/chronopic-firmware/chronopic-firmwarecord/chronopic-firmware-multitest.hex
similarity index 100%
rename from chronopic-firmware/chronopic-firmware-c/chronopic-firmware-automatic.hex
rename to chronopic-firmware/chronopic-firmwarecord/chronopic-firmware-multitest.hex
diff --git a/chronopic-firmware/chronopic-firmwarecord/chronopic-firmwarecord.in 
b/chronopic-firmware/chronopic-firmwarecord/chronopic-firmwarecord.in
index 66648fa..b079b89 100644
--- a/chronopic-firmware/chronopic-firmwarecord/chronopic-firmwarecord.in
+++ b/chronopic-firmware/chronopic-firmwarecord/chronopic-firmwarecord.in
@@ -106,7 +106,7 @@ class MyFrame(wx.Frame):
         #self.sizer_firmware_staticbox = wx.StaticBox(self.panel_1, -1, "Select / Seleccionar Firmware")
         self.frame_1_statusbar = self.CreateStatusBar(1, 0)
         #self.text_ctrl_2 = wx.TextCtrl(self.panel_1, -1, "")
-        #self.button_firmware_auto = wx.Button(self.panel_1, -1, "Automatic", style=wx.BU_EXACTFIT)
+        #self.button_firmware_auto = wx.Button(self.panel_1, -1, "Multitest", style=wx.BU_EXACTFIT)
         #self.button_firmware_jumps = wx.Button(self.panel_1, -1, "Jumps / Saltos", style=wx.BU_EXACTFIT)
         #self.button_firmware_runs = wx.Button(self.panel_1, -1, "Runs / Carreras", style=wx.BU_EXACTFIT)
         #self.button_firmware_led = wx.Button(self.panel_1, -1, "Led (test)", style=wx.BU_EXACTFIT)
@@ -165,7 +165,7 @@ class MyFrame(wx.Frame):
             self.frame_1_statusbar.SetStatusText(frame_1_statusbar_fields[i], i)
         #self.text_ctrl_2.SetMinSize((450, 27))
         self.combo_box_1.SetMinSize((250,30))
-        self.frame_1_statusbar.SetStatusText("Record Automatic Firmware / Grabar Firmware Automático", 0)
+        self.frame_1_statusbar.SetStatusText("Record Multitest Firmware / Grabar Firmware Multitest", 0)
         # end wxGlade
 
     def __do_layout(self):
@@ -251,7 +251,7 @@ class MyFrame(wx.Frame):
     #def button_open_auto(self, event): # wxGlade: MyFrame.<event_handler>
     #    print "button_open_auto"
     #    print DATADIR 
-    #    self.text_ctrl_2.SetValue(os.path.join(DATADIR, 'chronojump', 'firmware', 
'chronopic-firmware-automatic.hex'))
+    #    self.text_ctrl_2.SetValue(os.path.join(DATADIR, 'chronojump', 'firmware', 
'chronopic-firmware-multitest.hex'))
         
     #def button_open_jumps(self, event): # wxGlade: MyFrame.<event_handler>
     #    print "button_open_jumps"
@@ -281,7 +281,7 @@ class MyFrame(wx.Frame):
        
     def boton_ayuda(self, event): # wxGlade: MyFrame.<event_handler>
         #dlg = wx.MessageDialog(self, "ENGLISH\n\nWith this tool you can change Chronopic Firmware whenever 
you want. It's recommended 50ms for jumps and 10ms for runs.\nTesting: 'ledp.hex' can be recorded and then 
green led will blink.\nFirmwares are in Chronojump installation folder, \\share\\Chronojump\\firmware\nYou 
can open Chronojump software to see what is the port, but don't press 'Connect' button there, because port 
cannot be opened by two applications.\nIf you need more help please check 
forum:\nhttp://forum.chronojump.org\n\n\nESPAÑOL\n\nCon esta herramienta puede cambiar el Firmware de 
Chronopic tantas veces como quiera. Se recomienda 50ms para saltos, 10 ms para carreras.\nSi desea testear la 
herramienta, puede grabar el archivo 'ledp.hex' y verá como la luz verde parpadea.\nLos firmwares estan en la 
carpeta de instalacion de Chronojump, \\share\\Chronojump\\firmware\nPuede abrir Chronojump para ver qué en 
qué puerto aparece Chronopic, pero no pulse el botó
 n 'Conectar' en Chronojump porque un puerto no puede ser abierto por dos aplicaciones.\nSi necesita más 
ayuda, por favor use el foro:\nhttp://foro.chronojump.org\n\nChronopic-Firmwarecord is based on 
PyDownloader.", "PyDownloader Help", wx.OK)
-        dlg = wx.MessageDialog(self, "ENGLISH\n\nWith this tool you can change your old Chronopic firmware 
to the new Automatic firmware. This new firmware allows to change the configuration automatically if user is 
performing jumps or runs.\nThis firmware does not work for encoder.\nYou can open Chronojump software to see 
what is the port, but don't press 'Connect' button there, because port cannot be opened by two 
applications.\nIf you need more help please check forum:\nhttp://forum.chronojump.org\n\n\nESPAÑOL\n\nEsta 
herramienta sirve para cambiar el antiguo firmware del Chronopic por el nuevo firmware Automatico. Este nuevo 
firmware se configura automáticamente para saltos o carreras según sea necesario.\nEste firmware no sirve 
para el encoder.\nPuede abrir Chronojump para ver en qué puerto aparece Chronopic, pero no pulse el botón 
'Conectar' en Chronojump porque un puerto no puede ser abierto por dos aplicaciones.\nSi necesita más ayuda, 
por favor use el foro:\nh
 ttp://foro.chronojump.org\n\nChronopic-Firmwarecord is based on PyDownloader.", "PyDownloader Help", wx.OK)
+        dlg = wx.MessageDialog(self, "ENGLISH\n\nWith this tool you can change your old Chronopic firmware 
to the new Multitest firmware. This new firmware allows to change the configuration automatically if user is 
performing jumps or runs.\nThis firmware does not work for encoder.\nYou can open Chronojump software to see 
what is the port, but don't press 'Connect' button there, because port cannot be opened by two 
applications.\nIf you need more help please check forum:\nhttp://forum.chronojump.org\n\n\nESPAÑOL\n\nEsta 
herramienta sirve para cambiar el antiguo firmware del Chronopic por el nuevo firmware Multitest. Este nuevo 
firmware se configura automáticamente para saltos o carreras según sea necesario.\nEste firmware no sirve 
para el encoder.\nPuede abrir Chronojump para ver en qué puerto aparece Chronopic, pero no pulse el botón 
'Conectar' en Chronojump porque un puerto no puede ser abierto por dos aplicaciones.\nSi necesita más ayuda, 
por favor use el foro:\nht
 tp://foro.chronojump.org\n\nChronopic-Firmwarecord is based on PyDownloader.", "PyDownloader Help", wx.OK)
        dlg.ShowModal()
 
     def boton_eco(self, event): # wxGlade: MyFrame.<event_handler>
@@ -325,7 +325,7 @@ class MyFrame(wx.Frame):
       #----------------------------------------
       #-- Obtener el nombre
       #file = str(self.text_ctrl_2.GetLineText(0))
-      file = os.path.join(DATADIR, 'chronojump', 'firmware', 'chronopic-firmware-automatic.hex')
+      file = os.path.join(DATADIR, 'chronojump', 'firmware', 'chronopic-firmware-multitest.hex')
 
       #-- Si no hay ningun fichero especificado: Error
       if file=="":