[gnome-continuous-yocto/gnomeostree-3.28-rocko: 3034/8267] README.hardware: update Beaglebone section

[Emmanuele Bassi <ebassi src gnome org>]

commit cd271d2f2b1a0dc9fc6b04271f419cbea12fc830
Author: Ed Bartosh <ed bartosh linux intel com>
Date:   Wed Oct 12 13:36:12 2016 +0300

    README.hardware: update Beaglebone section
    
    Updated image creation instructions. Used wic images instead
    of manually partitioning SD card.
    
    [YOCTO #8719]
    
    (From meta-yocto rev: aaa23941f228f08573b0e4901e8bf3fd5f1c97e3)
    
    Signed-off-by: Ed Bartosh <ed bartosh linux intel com>
    Signed-off-by: Ross Burton <ross burton intel com>
    Signed-off-by: Richard Purdie <richard purdie linuxfoundation org>

 README.hardware |   54 ++++++------------------------------------------------
 1 files changed, 6 insertions(+), 48 deletions(-)
---
diff --git a/README.hardware b/README.hardware
index 6383bd7..8defba4 100644
--- a/README.hardware
+++ b/README.hardware
@@ -160,59 +160,17 @@ this, issue the following commands from the u-boot prompt:
 To further tailor these instructions for your board, please refer to the
 documentation at http://www.beagleboard.org/bone and http://www.beagleboard.org/black
 
-From a Linux system with access to the image files perform the following steps
-as root, replacing mmcblk0* with the SD card device on your machine (such as sdc
-if used via a usb card reader):
+From a Linux system with access to the image files perform the following steps:
 
-  1. Partition and format an SD card:
-     # fdisk -lu /dev/mmcblk0
+  1. Build an image. For example:
 
-     Disk /dev/mmcblk0: 3951 MB, 3951034368 bytes
-     255 heads, 63 sectors/track, 480 cylinders, total 7716864 sectors
-     Units = sectors of 1 * 512 = 512 bytes
-
-             Device Boot      Start         End      Blocks  Id System
-     /dev/mmcblk0p1   *          63      144584       72261   c Win95 FAT32 (LBA)
-     /dev/mmcblk0p2          144585      465884      160650  83 Linux
-
-     # mkfs.vfat -F 16 -n "boot" /dev/mmcblk0p1
-     # mke2fs -j -L "root" /dev/mmcblk0p2
-
-  The following assumes the SD card partitions 1 and 2 are mounted at
-  /media/boot and /media/root respectively. Removing the card and reinserting
-  it will do just that on most modern Linux desktop environments.
-
-  The files referenced below are made available after the build in
-  build/tmp/deploy/images.
-
-  2. Install the boot loaders
-     # cp MLO-beaglebone /media/boot/MLO
-     # cp u-boot-beaglebone.img /media/boot/u-boot.img
-
-  3. Install the root filesystem
-     # tar x -C /media/root -f core-image-$IMAGE_TYPE-beaglebone.tar.bz2
-
-  4. If using core-image-base or core-image-sato images, the SD card is ready
-     and rootfs already contains the kernel, modules and device tree (DTB)
-     files necessary to be booted with U-boot's default configuration, so
-     skip directly to step 8.
-     For core-image-minimal, proceed through next steps.
-
-  5. If using core-image-minimal rootfs, install the modules
-     # tar x -C /media/root -f modules-beaglebone.tgz
-
-  6. If using core-image-minimal rootfs, install the kernel zImage into /boot
-     directory of rootfs
-     # cp zImage-beaglebone.bin /media/root/boot/zImage
+     $ bitbake core-image-minimal
 
-  7. If using core-image-minimal rootfs, also install device tree (DTB) files
-     into /boot directory of rootfs
-     # cp zImage-am335x-bone.dtb /media/root/boot/am335x-bone.dtb
-     # cp zImage-am335x-boneblack.dtb /media/root/boot/am335x-boneblack.dtb
+  2. Use the "dd" utility to write the image to the SD card. For example:
 
-  8. Unmount the SD partitions, insert the SD card into the Beaglebone, and
-     boot the Beaglebone
+     # dd core-image-minimal-beaglebone.wic of=/dev/sdb
 
+  3. Insert the SD card into the Beaglebone and boot the board.
 
 Freescale MPC8315E-RDB (mpc8315e-rdb)
 =====================================