GNOME.org
 

gst-plugins-good 1.12.4

ChangeLog
=========

2017-12-07  Sebastian Dröge <slomo coaxion net>

        * configure.ac:
          releasing 1.12.4

2017-12-07 19:03:58 +0200  Sebastian Dröge <sebastian centricular com>

        * po/el.po:
        * po/nl.po:
          po: Update translations

2017-12-07 11:15:19 +0000  Tim-Philipp Müller <tim centricular com>

        * gst/audioparsers/gstflacparse.c:
        * gst/audioparsers/gstflacparse.h:
          Revert "flacparse: fix header rewriting being ignored"
          This caused broken metadata and also looks a bit dodgy.
          Revert until we can figure out a solution that works for
          all cases and doesn't break anything.
          This reverts commit adeee44b07a173b9ab4253216caba8f66dd43abb.
          https://bugzilla.gnome.org/show_bug.cgi?id=727802
          https://bugzilla.gnome.org/show_bug.cgi?id=785558

2017-08-25 11:57:26 +0200  Haakon Sporsheim <haakon pexip com>

        * gst/rtpmanager/rtpsession.c:
          rtpsession: Handle zero length feedback packets
          https://bugzilla.gnome.org/show_bug.cgi?id=791074

2017-07-10 15:19:34 +0200  Florian Zwoch <fzwoch gmail com>

        * gst/isomp4/qtdemux.c:
          qtdemux: fix debug log for 'hvcC' codec_data
          https://bugzilla.gnome.org/show_bug.cgi?id=784749

2017-11-23 07:59:07 +0100  Edward Hervey <edward centricular com>

        * gst/replaygain/rganalysis.c:
          rganalysis: Fix left shift of signed values
          left shifting signed values is undefined.
          Instead of doing "x << offs" which is undefined, do the equivalent
          "x * (1 << offs)" which is well defined

2017-11-24 10:36:01 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/audioparsers/gstflacparse.c:
          flacparse: Request at least the full header size when parsing headers
          Otherwise baseparse will incrementally send us bigger buffers until the
          full header size is reached, which is not only pointless but also means
          that baseparse will reallocate and copy into a bigger buffer for every
          input buffers. In pull mode that's done in 64kb increments, in push mode
          usually in much smaller increments, causing a lot of overhead for
          example when parsing high-quality coverart.

2017-10-22 18:26:12 +0800  Jun Xie <jun xie samsung com>

        * gst/isomp4/qtdemux.c:
          qtdemux: reset reused QtDemuxStream while parsing a new 'trak'
          if QtDemuxStream is reused, then we need to reset it.
          https://bugzilla.gnome.org/show_bug.cgi?id=788759

2017-11-18 02:01:58 +1100  Jan Schmidt <jan centricular com>

        * gst/multifile/gstsplitmuxpartreader.c:
          splitmuxsrc: Don't return FALSE from event handling.
          Returning FALSE because we drop an event means that
          internal sources like qtdemux might throw an error
          and break the whole pipeline. The only time it can
          happen is either flushing or shutdown, and those
          will be handled anyway.

2017-03-13 18:14:12 +0900  paul.kim <paul hyunil lge com>

        * ext/soup/gstsouphttpsrc.c:
          souphttpsrc: Remove range header when seek to 0
          This fixes the previous range header is remained if seek to 0 is
          attempted.
          https://bugzilla.gnome.org/show_bug.cgi?id=779957

2017-06-20 16:28:35 +0200  Jan Alexander Steffens (heftig) <jan steffens gmail com>

        * tests/files/test-cert.pem:
          tests: souphttpsrc: Update test-cert.pem
          Recent GnuTLS disregards the Common Name and only looks at the Subject
          Alternative Name extension. Since our test-cert has no SAN extension,
          validation fails.
          Generate a new certificate with SAN. In addition to 127.0.0.1, for good
          measure make it valid for localhost and ::1, too.
          https://bugzilla.gnome.org/show_bug.cgi?id=784005

2017-06-20 16:39:36 +0200  Jan Alexander Steffens (heftig) <jan steffens gmail com>

        * tests/check/elements/souphttpsrc.c:
          tests: souphttpsrc: Avoid deprecated ssl-ca-file property
          SoupSession's ssl-ca-file property is deprecated. Use the recommended
          tls-database property.
          This is a bit more complex as it requires creating a GTlsFileDatabase
          object for an absolute (!) path to the CA certificates file.
          https://bugzilla.gnome.org/show_bug.cgi?id=784005

2017-06-20 16:37:55 +0200  Jan Alexander Steffens (heftig) <jan steffens gmail com>

        * tests/check/elements/souphttpsrc.c:
          tests: souphttpsrc: Avoid deprecated server ssl properties
          The ssl-cert-file and ssl-key-file properties are deprecated. Use the
          soup_server_set_ssl_cert_file function to load the files.
          https://bugzilla.gnome.org/show_bug.cgi?id=784005

2017-06-20 16:34:41 +0200  Jan Alexander Steffens (heftig) <jan steffens gmail com>

        * tests/check/elements/souphttpsrc.c:
          tests: souphttpsrc: Make ssl_cert/key_file static
          Just a bit of cleanup.
          https://bugzilla.gnome.org/show_bug.cgi?id=784005

2017-11-08 16:34:01 +0100  Edward Hervey <edward centricular com>

        * ext/soup/gstsouphttpsrc.c:
          souphttpsrc: Fix seeking back to 0
          This is a regression introduced by "03db374 - souphttpsrc: retry
          request on early termination from the server"
          The problem was that when seeking back to 0, we would not end up calling
          add_range_header() which in addition to adding range headers *ALSO* sets
          the read_position to the requested one.
          This would result in a wide variety of later failures, like reading
          again and again instead of stopping properly.

2017-11-06 21:13:34 +0100  Jan Alexander Steffens (heftig) <jan steffens gmail com>

        * sys/v4l2/gstv4l2deviceprovider.c:
          v4l2deviceprovider: Add missing V4L2_CAP_TOUCH
          This define was only added in Linux 4.8. This commit is for the stable
          branch only, since we want to avoid bumping the v4l headers in fear of
          regressions.
          https://bugzilla.gnome.org/show_bug.cgi?id=789197

2017-10-19 14:02:37 +0200  Jan Alexander Steffens (heftig) <jan steffens gmail com>

        * sys/v4l2/gstv4l2deviceprovider.c:
          v4l2deviceprovider: Ignore touch sensing devices
          With GST_V4L2_USE_LIBV4L2=1, my laptop's touchpad shows up as a video
          source device in gst-device-monitor, but attempting to stream from it
          fails because the device doesn't actually support any video formats.
          name  : Synaptics RMI4 Touch Sensor
          class : Video/Source
          caps  : video/x-raw, format=(string)I420, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, 
height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
          video/x-raw, format=(string)YV12, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, 
height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
          video/x-raw, format=(string)BGR, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, 
height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
          video/x-raw, format=(string)RGB, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, 
height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
          properties:
          udev-probed = true
          device.bus_path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0
          sysfs.path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0
          device.subsystem = video4linux
          device.product.name = "Synaptics\ RMI4\ Touch\ Sensor"
          device.capabilities = :capture:
          device.api = v4l2
          device.path = /dev/v4l-touch0
          v4l2.device.driver = rmi4_f54
          v4l2.device.card = "Synaptics\ RMI4\ Touch\ Sensor"
          v4l2.device.bus_info = rmi4:rmi4-00.fn54
          v4l2.device.version = 265480 (0x00040d08)
          v4l2.device.capabilities = 2501902337 (0x95200001)
          v4l2.device.device_caps = 354418689 (0x15200001)
          gst-launch-1.0 v4l2src device=/dev/v4l-touch0 ! ...
          v4l2-ctl -d /dev/v4l-touch0 --list-formats reports:
          ioctl: VIDIOC_ENUM_FMT
          Index       : 0
          Type        : Video Capture
          Pixel Format: 'TD16'
          Name        : 16-bit signed deltas
          Index       : 1
          Type        : Video Capture
          Pixel Format: 'TD08'
          Name        : 8-bit signed deltas
          Index       : 2
          Type        : Video Capture
          Pixel Format: 'TU16'
          Name        : 16-bit unsigned touch data
          https://bugzilla.gnome.org/show_bug.cgi?id=789197

2017-09-23 15:41:30 -0400  Nicolas Dufresne <nicolas dufresne collabora com>

        * gst/flv/gstflvdemux.c:
          flvdemux: Ignore invalid H.264 codec data
          This code basically skip over codec_data with empty payload. In
          this case, the codec_data variable is the size of the header for
          the CODEC part of Video Tag. The remaining is supposed to be the
          H.264 codec data, hence should not be empty.
          https://bugzilla.gnome.org/show_bug.cgi?id=787795

2017-09-24 14:35:01 -0400  Nicolas Dufresne <nicolas dufresne collabora com>

        * gst/flv/gstflvdemux.c:
          flvdemux: Only set pixel-aspect-ratio if specified
          If it's not specified, we should let the decoder figure it out.
          Apparently the code was already in place, all was to make the code
          conditional.
          https://bugzilla.gnome.org/show_bug.cgi?id=787795

2017-09-23 15:44:09 -0400  Nicolas Dufresne <nicolas dufresne collabora com>

        * gst/flv/gstflvdemux.c:
          flvdemux: Don't pull passed the EOS
          When a truncated FLV is provided and processed in pull mode, we
          may endup trying to pull passed EOS, causing a rather confusing
          warning as the pull offset is an integer overflow.
          https://bugzilla.gnome.org/show_bug.cgi?id=787795

2017-09-23 15:38:07 -0400  Nicolas Dufresne <nicolas dufresne collabora com>

        * gst/flv/gstflvdemux.c:
          flvdemux: Avoid integer overflow on invalid CTS
          If the CTS is negative an would lead to a negtive PTS, clip
          the CTS so the PTS will be 0.
          https://bugzilla.gnome.org/show_bug.cgi?id=787795

2017-10-01 16:09:13 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/rtsp/gstrtspsrc.c:
          rtspsrc: Ignore medias marked as sendonly
          We're never going to receive anything from them, so don't create pads
          for them. These medias are destinations where *we* could send something.



Download
========
https://download.gnome.org/sources/gst-plugins-good/1.12/gst-plugins-good-1.12.4.tar.xz (3.33M)
  sha256sum: 649f49bec60892d47ee6731b92266974c723554da1c6649f21296097715eb957
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]