gst-plugins-good 1.6.4


2016-04-14  Tim-Philipp Müller <tim centricular com>

          releasing 1.6.4

2016-04-12 09:41:00 +0000  Paolo Pettinato <ppettina cisco com>

        * gst/rtpmanager/gstrtpmux.c:
          rtpmux: Forward sticky events on buffer lists too, not only on buffers

2016-03-08 13:03:55 +0100  Alban Bedel <alban bedel avionic-design de>

        * sys/v4l2/gstv4l2object.c:
          v4l2object: fix capture with bayer formats other than bggr
          gst_v4l2_object_get_caps_info() always return V4L2_PIX_FMT_SBGGR8
          for all bayer formats. This is obviously broken if the device use
          another ordering. Fix this by properly reading the format parameter.

2016-03-04 15:09:45 +0100  Josep Torra <n770galaxy gmail com>

        * sys/v4l2/gstv4l2object.c:
          v4l2: fix colorimetry for NV12
          Replicate V4L2_MAP_QUANTIZATION_DEFAULT macro behavior.
          At #v4l it was described that documentation might be wrong and that
          we should trust this macro instead.

2016-01-21 17:41:55 -0500  Nicolas Dufresne <nicolas dufresne collabora com>

        * sys/v4l2/gstv4l2object.c:
          v4l2: Re-add colorimetry field for RGB formats
          This time, check if it's an RGB format and sets the transformation
          matrix to identity. The rest of the colorimetry information is
          meaningfull and shall be kept.

2016-01-22 10:03:50 +0100  Wim Taymans <wtaymans redhat com>

        * sys/v4l2/gstv4l2object.c:
          v4l2: fix sRGB colorspace definition
          V4l2 can also use the sRGB colorspace for YUV formats and thus needs a
          default matrix.

2015-11-17 12:39:05 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/udp/gstudpsrc.c:
        * gst/udp/gstudpsrc.h:
          udpsrc: Add "loop" property for enabling/disabling multicast loopback
          On POSIX, IP_MULTICAST_LOOP is a setting for the sender socket. On Windows it
          is a setting for the receiver socket. As such we will need it on udpsrc too to
          allow filtering out our own multicast packets.

2016-02-10 19:56:59 +0530  Nirbheek Chauhan <nirbheek centricular com>

        * sys/v4l2/gstv4l2deviceprovider.c:
          v4l2: Don't leak v4l2 objects and props on probe errors

2016-03-15 03:25:26 +0530  Nirbheek Chauhan <nirbheek centricular com>

        * gst/rtp/gstrtpjpegdepay.c:
          rtpjpegdepay: Don't send invalid frames downstream after packet loss or a DISCONT
          After clearing the adapter due to a DISCONT, as might happen when some packet(s)
          have been lost, the depayloader was pushing data into the adapter (which had no
          header due to the clear), creating a headerless frame out of it, and sending it
          downstream. The downstream decoder would then usually ignore it; unless there
          were lots of DISCONTs from the jitterbuffer in which case the decoder would reach
          its max_errors limit and throw an element error. Now we just discard that data.
          It is probaby not worth trying to salvage this data because non-progressive
          jpeg does not degrade gracefully and makes the video unwatchable even with
          low packet loss such as 3-5%.

2016-01-31 11:08:38 +1100  Sebastian Dröge <sebastian centricular com>

        * gst/rtp/gstrtpjpegpay.c:
          rtpjpegpay: Allow different quantization tables for components 2 and 3
          RFC 2435 mentions in section 4.1 that U/V use table number 1, but this seems
          just like an example. Some encoders are not following that and there seems to
          be no reason to reject their streams.

2016-02-29 23:40:03 -0300  Thiago Santos <thiagoss osg samsung com>

        * gst/multifile/gstsplitmuxsink.c:
        * tests/check/elements/splitmux.c:
          splitmuxsink: only try to create internal sink if it doesn't exist
          This allows splitmuxsink to be reused after being put to NULL.
          Test included

2016-03-04 14:07:19 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/udp/gstudpsrc.c:
          udpsrc: Fix multicast group joining with provided sockets on Windows
          On Windows the socket will be bound to ANY instead of the multicast group,
          as binding to a multicast group does not work. Which would mean that we
          override src->addr to become ANY and won't automatically join a multicast
          group anymore on Windows.
          On Linux we would automatically join a multicast group, keep it consistent.

2015-11-04 14:51:19 +0900  Jihae Yi <jihae yi samsung com>

        * gst/rtsp/gstrtspsrc.c:
          rtspsrc: avoid potentially overflowing expression

2016-03-08 17:37:17 +0100  Thomas Roos <thomas roos industronic de>

        * sys/directsound/gstdirectsoundsink.c:
          dirctsoundsink: Setting volume should not unmute

2016-03-08 13:57:24 +0100  Thomas Roos <thomas roos industronic de>

        * sys/directsound/gstdirectsoundsink.c:
          dirctsoundsink: Fix volume reset on unmute

2016-02-28 13:42:28 +0000  Tim-Philipp Müller <tim centricular com>

        * gst/replaygain/gstrgvolume.c:
        * tests/check/elements/rgvolume.c:
          rgvolume: make tag list writable before modifying it
          Making the event itself writable is not enough, it won't make
          the actual taglist in the event writable as well. Instead, just
          make a copy of the taglist and then create a new tag event from
          that if required, replacing the old one. Before we would
          inadvertently modify taglists upstream elements might still
          be holding on to. Add unit test for this as well.

2016-02-28 13:01:34 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/rtsp/gstrtspsrc.c:
          rtspsrc: Properly error out if binding the UDP sockets fails
          udpsrc is not returning us a socket in that case.

2016-02-24 09:12:03 +0100  Philippe Normand <philn igalia com>

        * gst/isomp4/qtdemux.c:
          qtdemux: don't push encrypted buffer without cenc metadata
          When the cenc metadata is stored outside of the moof box and the
          stream is exposed it is possible that the cenc metadata hasn't been
          processed yet while the first buffer is being pushed. When this
          happens the buffer can't possibly be decrypted downstream so don't
          push it.

2015-10-21 16:21:45 +0200  Philippe Normand <philn igalia com>

        * gst/isomp4/qtdemux.c:
          qtdemux: read saio aux_info_type as a FOURCC

2016-02-23 18:27:47 +0200  Sebastian Dröge <sebastian centricular com>

        * ext/dv/gstdvdec.c:
        * ext/gdk_pixbuf/gstgdkpixbufdec.c:
        * gst/deinterlace/gstdeinterlace.c:
        * gst/smpte/gstsmpte.c:
          gst: Handle gst_pad_get_current_caps() returning NULL gracefully

2015-12-16 12:40:39 +0000  Dave Craig <dcraig brightsign biz>

        * ext/flac/gstflacenc.c:
        * gst/flv/gstflvmux.c:
        * gst/imagefreeze/gstimagefreeze.c:
        * gst/rtp/gstrtph264depay.c:
        * gst/shapewipe/gstshapewipe.c:
        * gst/videocrop/gstaspectratiocrop.c:
          gst: Don't assume that get_current_caps() returns non-NULL caps after has_current_caps()
          Remove calls to gst_pad_has_current_caps() which then go on to call
          gst_pad_get_current_caps() as the caps can go to NULL in between. Instead just
          use gst_pad_get_current_caps() and check for NULL.

2015-12-16 10:54:17 +0000  Dave Craig <dcraig brightsign biz>

        * gst/audioparsers/gstaacparse.c:
          aacparse: Handle gst_pad_get_current_caps() returning NULL gracefully
          This can happen when the pipeline is currently shutting down.

2016-02-23 15:57:18 +0100  Linus Svensson <linussn axis com>

        * gst/matroska/matroska-demux.c:
          matroska-demux: Don't handle seek until ready

2016-02-23 15:55:13 +0100  Linus Svensson <linussn axis com>

        * gst/matroska/matroska-demux.c:
          matroska-demux: Unref seek event

2016-02-22 11:01:40 +0100  Aurélien Zanelli <aurelien zanelli parrot com>

        * gst/multifile/gstmultifilesink.c:
          multifilesink: close file on write error with next-file mode is set to buffer
          If we have an error during fwrite call, file stays open and thus next
          incoming buffer will trigger an assert when trying to opening a new
          This happens if we do not restart element, file is closed at stop, and
          if application handles the returned GST_FLOW_ERROR to keep bin alive.

2016-02-22 09:09:01 +0900  Vineeth TM <vineeth tm samsung com>

        * gst/avi/gstavidemux.c:
          avidemux: Fix buffer memory leak
          buffer being mapped is not being unmapped in some cases

2015-11-04 10:19:03 +0100  Stian Selnes <stian pexip com>

        * gst/rtpmanager/gstrtpjitterbuffer.c:
          rtpmanager: Don't warn for duplicate/reordered packets
          This is a normal scenario and should not be a warning.

2016-02-06 14:39:05 +0100  Matej Knopp <matej knopp gmail com>

        * gst/isomp4/qtdemux.c:
          qtdemux: workaround for files with wrong color_table_id value
          Instead of erroring out, just use the default color table.

2015-12-04 00:46:34 +1100  Havard Graff <havard graff gmail com>

        * gst/flv/gstflvmux.c:
          flvmux: plug leak(s) in error-scenario

2015-12-04 00:46:12 +1100  Havard Graff <havard graff gmail com>

        * gst/flv/gstflvdemux.c:
          flvdemux: fix eos event leak

2016-02-18 18:33:13 +0100  Philippe Normand <philn igalia com>

        * gst/isomp4/qtdemux.c:
          qtdemux: plug leaks in cenc aux info parsing

2016-02-18 13:43:07 +0000  Tim-Philipp Müller <tim centricular com>

        * tests/check/
          tests: fix spurious souphttpsrc test timouts
          Set GSETTINGS_BACKEND=memory, apparently there's something
          about fork() and the dconf backend (or whatever else that
          drags in or activates) that messes up locking and causes
          timeouts due to deadlocks in g_mutex_lock(), since
          everything works fine with CK_FORK=no as well.

2016-02-18 11:10:14 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/matroska/matroska-demux.c:
          matroskademux: Unmap wavpack header buffer after creating it
          Otherwise it will be mapped writable all the time and we can't read from it

2016-02-16 09:02:30 +0900  Vineeth TM <vineeth tm samsung com>

        * gst/avi/gstavidemux.c:
          avidemux: Fix string memory leak
          codec_name is not being freed in all conditions leading to memory leak

2016-02-07 15:02:35 -0500  Nicolas Dufresne <nicolas dufresne collabora com>

        * ext/jpeg/gstjpegdec.c:
          jpegdec: Don't pass the same data over and over
          We already pass the entire frame to the decoder. If the decoder ask for
          more data, don't pass the same data again as this leads to infinit loop.
          Instead, simply fail the fill function to signal the problem with that
          frame. It will then be skipped properly.

2016-01-30 18:43:30 +0100  Sebastian Dröge <sebastian centricular com>

        * gst/rtp/gstrtpjpegpay.c:
          rtpjpegpay: Skip APP and JPG markers and print warnings for unknown markers
          For APP/JPG markers the size is following and we have to skip that. This is
          not really a problem unless the marker contains e.g. a preview JPEG or
          something else that we might interprete as another marker.

2016-03-13 10:33:13 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/audioparsers/gstflacparse.c:
          Revert "flacparse: push tags in pre_push_frame"
          This reverts commit 4065fcb80a49924b70f0c8fc159dec0ff47943a1.
          flacparse should not push tags by itself, the base class is going to do that
          while properly merging in upstream tags. It just didn't because of a bug in
          the base class, which was hidden by this commit.

2016-03-01 15:01:22 +0000  Luis de Bethencourt <luisbg osg samsung com>

        * gst/audioparsers/gstflacparse.c:
          flacparse: push tags in pre_push_frame
          Push a tag event before pre-roll if we have tags.
          This issue breaks tag reading via GstDiscoverer:

2016-02-27 20:33:32 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/goom/gstgoom.c:
          goom: Use goom_set_resolution() instead of recreating the goom instance when the resolution changes

======== (3.07M)
  sha256sum: 6915335458d0421d30d2545f85cc4d891d10d48f2be8dc1bd8f45e38b8f64a9c

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]