Re: [orca-list] Orca master

[José Vilmar Estácio de Souza <vilmar informal com br>]

Hi Guy.
According to the following line in the files sent, orca seems to be 
installed in /usr/bin.
/usr/bin/install -c orca '/usr/bin'

Could you check the creation date of the file orca present in this 
directory?
ls -l /usr/bin/orca

Could you check the location from where orca is running?
pgrep -lfa orca

Also could you check the branch from where orca was compiled and installed?
git status

Thanks.


On 11/3/21 23:26, Guy Schlosser wrote:
> Hey there Jose, I did the orca+h command as you suggested, and it 
> reports version 40.0. Here are the two files resulting from make 
> install. Thanks much for your help.
>
>
>
> Guy
>
>
> On 11/3/21 21:40, José Vilmar Estácio de Souza wrote:
> > The version number should be 41.BETA.
> > You can verify the version pressing orca_key+h.
> >
> > I suspect that the orca was installed in a different directory as for 
> > example /usr/local/bin.
> >
> > You can run the make install command, redirect the output to files 
> > and send me the files so that I can check.
> > make install 1>output.txt 2>errors.txt
> >
> >
> >
> >
> >
> > On 11/3/21 20:51, Guy Schlosser via orca-list wrote:
> > > I did try ./autogen.sh again without sudo, and I did make again 
> > > without sudo also. My version number did not change, but I can tell 
> > > you the UPS site is working for me now. Still not sure if I’m 
> > > running master or not, can someone tell me what their version number 
> > > is? Thanks in advance.
> > >
> > > Guy
> > >
> > > JAWS Certified, 2021, 
> > > https://www.freedomscientific.com/Training/Certification
> > >
> > > > On Nov 3, 2021, at 5:52 PM, Volodymyr Dorozhinsky via orca-list 
> > > > <orca-list gnome org> wrote:
> > > >
> > > > Hi,
> > > >
> > > >
> > > > I think You do not need sudo when running
> > > >
> > > > ./autogen.sh.
> > > > Also make sure there are no errors reported when running all 3 
> > > > building steps.
> > > >
> > > >
> > > >
> > > > Best regards
> > > > Volodymyr
> > > >
> > > >
> > > > > On 11/3/21 1:40 PM, Guy Schlosser via orca-list wrote:
> > > > > Yes. I did sudo ./autogen.sh make and then  Sudo make install
> > > > >
> > > > > JAWS Certified, 2021, 
> > > > > https://www.freedomscientific.com/Training/Certification
> > > > >
> > > > > > > On Nov 3, 2021, at 6:50 AM, Edhoari Setiyoso via orca-list 
> > > > > > > <orca-list gnome org> wrote:
> > > > > > Have you run "make install"?
> > > > > >
> > > > > > Also, I think flat review can help here..
> > > > > >
> > > > > >
> > > > > > HtH
> > > > > >
> > > > > > > On 11/3/21 12:59, Guy Schlosser via orca-list wrote:
> > > > > > > Hey y’all, I have a question. If I clone orca from git without 
> > > > > > > the -b switch, cd into the directory and compile, am I getting 
> > > > > > > master? Is there a command I have to do between cloning and 
> > > > > > > compilation? I only ask because when I ran orca —version, it 
> > > > > > > still gave me a version number of 40.0. Is that correct? I am 
> > > > > > > having a problem on the UPS website, using Chrome. I haven’t 
> > > > > > > tested in firefox yet, but if I track a package orca seems to 
> > > > > > > get stuck in the navigation region. I know that my tracking 
> > > > > > > results are on the screen, because if I press age for heading, I 
> > > > > > > get ship to. I just can’t get down there with my arrow keys to 
> > > > > > > read them. Is this happening with master also? Thanks much in 
> > > > > > > advance for your help.
> > > > > > >
> > > > > > > Guy
> > > > > > >
> > > > > > > JAWS Certified, 2021, 
> > > > > > > https://www.freedomscientific.com/Training/Certification
> > > > > > > _______________________________________________
> > > > > > > orca-list mailing list
> > > > > > > orca-list gnome org
> > > > > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > > > > GNOME Universal Access guide: 
> > > > > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > > > > > --
> > > > > > Edhoari Setiyoso
> > > > > >
> > > > > > _______________________________________________
> > > > > > orca-list mailing list
> > > > > > orca-list gnome org
> > > > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > > > GNOME Universal Access guide: 
> > > > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > > > > _______________________________________________
> > > > > orca-list mailing list
> > > > > orca-list gnome org
> > > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > > GNOME Universal Access guide: 
> > > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > > > _______________________________________________
> > > > orca-list mailing list
> > > > orca-list gnome org
> > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > GNOME Universal Access guide: 
> > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > > _______________________________________________
> > > orca-list mailing list
> > > orca-list gnome org
> > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > GNOME Universal Access guide: 
> > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> >
> >
> > .