When I run startx
I get an error referring to no screens
found.
So that may be why Orca is not
working.
So I wonder if there is something in /boot/boot.txt
that I could comment out or uncomment to allow it to be okay without a
screen?
Glenn
----- Original Message -----
From: Glenn
K0LNY
Sent: Thursday, July 23, 2020 1:18 PM
Subject: Re: [orca-list] Orca On The Raspberry PI 4 Hi,
I am using SSH to try to get Raspbian going on this Raspberry PI 4, 4G of RAM. It is running Buster. I am using SSH to get into it. So I did apt-get update first. Then I did apt-get install mate-desktop that seemed to go fine Then I did apt-get install gnome-orca That too seemed to go fine. I still don't know if it boots to a desktop. I try the user name and password with no sound and then try calling up Orca in what might be the desktop, but no sound. In the SSH session, I can get audio with both speaker-test -c 2 and Pranav suggested I try: Spd-say "hello" So I know that I can get audio from the speaker jack. But normally when Orca is working, I can go into a terminal and do: espeak "hello" and it comes back with hello. This normally works in an SSH session, but it does not, and this is the error I get: There may be a little at the top, but it ran off the screen, and I will paste the results below, and I am wondering if this is why Orca isn't talking... Start Here: ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM bluealsa graphic 192 ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.bluealsa.device' ALSA lib conf.c:4568:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory ALSA lib conf.c:5036:(snd_config_expand) Args evaluate error: No such file or directory graphic 545 ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM bluealsa _expression_ 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/als a/pa_linux_alsa.c', line: 924 Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started graphic 545 JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 graphic 545 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate) _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr graphic 545 )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 graphic 545 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate) _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr graphic 545 )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr graphic 545 )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate) _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr graphic 545 )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr graphic 545 )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate) _expression_ 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048 graphic 545 _expression_ 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722 _expression_ 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &o utputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843 graphic 186 root@raspberrypi:/home/pi# graphic 590 graphic 932 Thanks for any ideas. Glenn -------------------------------------------------------------------------------- _______________________________________________ orca-list mailing list orca-list gnome org https://mail.gnome.org/mailman/listinfo/orca-list Orca wiki: https://wiki.gnome.org/Projects/Orca Orca documentation: https://help.gnome.org/users/orca/stable/ GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html |