There was one where speakup got working.
I can't find it right now though.
Wonder what happened with it?
Where is the talking image gotten from?That is if there is a special one made.----- Original Message -----From: Krishnakant ManeSent: Wednesday, July 08, 2020 1:06 AMSubject: Re: [orca-list] Some small linux device
I am sure one can use the talking image built for this.
On 07/07/20 9:43 pm, Glenn K0LNY wrote:
Hi, Since mine are all older ones, I just ordered the model 4 with 4GB. Anyway, you will download an image, and use a utility to burn the image to a micro SD card. You will provide the power and although you may be able to just plug in a keyboard and a speaker and press super S to start Orca, you may need to plug it into the router or if you don't have a router, you can plug it into the Ethernet port on a computer and SSH into it to set it up. The latter is how I have always done it due to the low RAM on the Raspberry PI units I have had. Depending on the Raspberry PI image you get, or perhaps on all of them, when you SSH into it and log in, you can run a utility called raspisetup This will configure the install and allow you to expand the image to use the entire card. Glenn ----- Original Message ----- From: "Vojtech smiro via orca-list" <orca-list gnome org> To: "Didier Spaier via orca-list" <orca-list gnome org> Sent: Tuesday, July 07, 2020 11:02 AM Subject: Re: [orca-list] Some small linux device I am sorry, I haven't any experiences with that. So, when I buy Raspberry Pi, what can I do to have speech. What devices do I neead (headphones, screen, speakers, etc)? Thanks. Best regards Vojta. Glenn K0LNY napsal(a):Hi Vojtech, What about it do you think you cannot do alone? I do everything non-visually and I have had lots of these, Banana PI, Raspberry PI, Orange PI, and a Pine64. No need for any sighted assistance with this stuff. Glenn ----- Original Message ----- From: "Vojtech smiro via orca-list" <orca-list gnome org> To: "Didier Spaier via orca-list" <orca-list gnome org> Sent: Tuesday, July 07, 2020 10:21 AM Subject: Re: [orca-list] Some small linux device Hello, yes, my friend from Czech Republic told me about Raspberry Pi, but he warned me, I alone without seeing person cannot option it alone. And I don't know where can I buy it in the czech Republic, who can help me with optioning and what is Raspberry Pi. I know, it is like Lego (smile). I can build it, but I am afraid I can break it. If you want, write me privatelly, but I believe, Raspberry Pi interests other people and Pinebooks of course too. so it's your choice how do you write me. Thanks. Best regards Vojta. Kyle via orca-list napsal(a):The Raspberry Pi 4 is good, and you can get it with 2GB, 4GB or 8GB of RAM. Those are probably the easiest to find and the least expensive as well. The OS is normally put onto a MicroSD, but there is also a way to make it boot from USB, which can sometimes be faster, depending on the boot device. I have an older Pinebook, and they definitely at that time could have used improvement. I think the newer versions may have made those improvements, but I'm not sure, as I didn't try one yet. There is supposed to be a Pinebook Pro, which is supposed to offer a much better experience. The main advantage to these is that they are laptop computers complete with the keyboard and the screen. There are no separate parts, no cables, etc. As for plugin devices, the Odroid N2 is certainly one of the best. This is what I'm using to write this message. It is a little larger than a Raspberry Pi, and it only ships with either 2GB or 4GB of RAM. But it has a 6-core processor, 4 large and 2 small, and the OS runs from an eMMC chip, which is closer to the size of 4 MicroSD's, 2 side-by-side with two more stacked on top of them. The speed advantage is significant, though the price is also noticeably higher. The biggest advantage is that although all of these machines are passively cooled, the N2 doesn't even seem to get warm to the touch, no matter how much load I put on it. These are some of the best small and fairly cool fanless Linux devices I know and/or have used. Hope this helps. ~Kyle _______________________________________________ orca-list mailing list orca-list gnome org https://mail.gnome.org/mailman/listinfo/orca-list Orca wiki: https://wiki.gnome.org/Projects/Orca Orca documentation: https://help.gnome.org/users/orca/stable/ GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html_______________________________________________ orca-list mailing list orca-list gnome org https://mail.gnome.org/mailman/listinfo/orca-list Orca wiki: https://wiki.gnome.org/Projects/Orca Orca documentation: https://help.gnome.org/users/orca/stable/ GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html_______________________________________________ orca-list mailing list orca-list gnome org https://mail.gnome.org/mailman/listinfo/orca-list Orca wiki: https://wiki.gnome.org/Projects/Orca Orca documentation: https://help.gnome.org/users/orca/stable/ GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html _______________________________________________ orca-list mailing list orca-list gnome org https://mail.gnome.org/mailman/listinfo/orca-list Orca wiki: https://wiki.gnome.org/Projects/Orca Orca documentation: https://help.gnome.org/users/orca/stable/ GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html--
Regards,
Krishnakant Mane,
Project Founder and Leader,
GNUKhata
(Opensource Accounting, Billing and Inventory Management Software)