GNOME.org
 

Re: [orca-list] No speech from orca in GUI in arch but espeakup works fine.

That's no guarrantee it got compiled correctly.  archlinux has makepkg
which you get after pacman -S base-devel unless it's already on your
machine and with that you can build your own version of any of the
archlinux packages.

On Thu, 1 Aug 2019, matthew dyer via orca-list wrote:


Date: Thu, 1 Aug 2019 09:37:38
From: matthew dyer via orca-list <orca-list gnome org>
Reply-To: matthew dyer <ilovecountrymusic483 gmail com>
To: Didier Spaier <didier slint fr>
Cc: orca-list gnome org
Subject: Re: [orca-list] No speech from orca in GUI in arch but espeakup works
     fine.

Also. Easpeak-by is in the afisial arch repo. I used the Pac-Man -S Espeak-NG when I got the error. HTH.
Matthew

Sent from my iPhone


On Jul 31, 2019, at 11:39 PM, Didier Spaier <didier slint fr> wrote:

Hello,

In my opinion it's better to just write LDLIBS='-lespeak-ng -lpthread'
in the 'make' command (as we do in Slint) when compiling than modifying
the Makefile upstream, knowing that some distributions still ship
espeak, so forking he repo just for that can be confusing for packages
maintainers.

Furthermore, in the initial post Matthew didn't mention an issue with
espeakup but with Orca.

Best,

Didier



On 31/07/2019 22:24, ????????? ??????????? via orca-list wrote:
hello. i think that problem is because ArchLinux switched to espeak-ng. and speatch-despatcher requires 
it. espeakup currently uses old espeak witch conflicts with ng variant.
I recommend you install espeak-ng. but espeakup will not work.
here I created espeakup source code which are compatible with espeak-ng 
https://github.com/alex19EP/espeakup-ng
31.07.2019 19:29, matthew dyer via orca-list ?????:

Is there a way to disable the screen saver with speakup? Is there a wiki link to the orca or what? I am 
not sure what the screen saver has to do with orca, but will take a look. I don?t recall having to 
doing anything to get orca running before. I think it was a Chang in arch at some point.

Sent from my iPhone


On Jul 31, 2019, at 9:36 AM, Jude DaShiell <jdashiel panix com> wrote:

There are some gsettings commands to try.
One of the problems is the screen saver is running and it will help to
disable that.  Once you get into g.u.i. try screen-reader --replace
<enter> from the alt-f2 command prompt.  That may be enough to get stuff
going a little more.


On Wed, 31 Jul 2019, matthew dyer wrote:

Date: Wed, 31 Jul 2019 09:11:04
From: matthew dyer <ilovecountrymusic483 gmail com>
To: Jude DaShiell <jdashiel panix com>
Cc: orca list <orca-list gnome org>
Subject: Re: [orca-list] No speech from orca in GUI in arch but espeakup works
     fine.

Hi, orca comes up, but without speech. After installing mate and orca I did the following command. 
farting set org.mate.interface accessibility true which worked. There is just no speech in GUI. I am 
using GDM as my login manager if that matters.
Matthew

Sent from my iPhone


On Jul 30, 2019, at 9:55 PM, Jude DaShiell <jdashiel panix com> wrote:

Doing the gsettings steps to enable accessibility helps with that
problem.  I think you can find them on the orca documentation wiki.
Fortunately, you can do all of those commands in espeak on the console.
Then if what you installed was mate alt-f2 screen-reader otherwise
alt-f2 orca should work the first time.


On Tue, 30 Jul 2019, matthew dyer via orca-list wrote:

Date: Tue, 30 Jul 2019 21:48:00
From: matthew dyer via orca-list <orca-list gnome org>
Reply-To: matthew dyer <ilovecountrymusic483 gmail com>
To: orca list <orca-list gnome org>
Subject: [orca-list] No speech from orca in GUI in arch but espeakup works
   fine.

Hi all,

Yesterday I installed arch using the tarch image from the talking arch site and all went well but 
afterr installing a GUI and starting orca I found that though audio sounds work fine, orca is 
silent and I am not sure why.  Any idea how to fix this?  Espeakup works fine and so I am wondering 
if it is an audio thing with pulse audio or something else.  I could try to change the audio out to 
also, but wanted to see if anyone else had this happen and how did they fix this.  Thanks.

Matthew


_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html


--


--


_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html

_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html

_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html

_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html



--
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]