Re: [orca-list] orca responses very late in all applications menu.

[Joanmarie Diggs <jdiggs igalia com>]

Hmmmm. That means you need to do ./autogen.sh first. Which surprises me
because I assumed you had already done this as part of getting,
building, and installing Orca from git.

--joanie

On 07/14/2018 12:29 PM, bittukumar jaiswal via orca-list wrote:
> sorry for late reply
> I did as you said but no success. after (make) I hit enter on it gave
> me an error.
> no targets specified and no makefile found. stop
> yet I have not tryed whatever Majid Hussain has said.
>
> On 7/14/18, Joanmarie Diggs <jdiggs igalia com> wrote:
> > Hi Majid.
> >
> > Thanks for doing this. However, it seems to defeat the purpose of what
> > I'm asking to be done. And the next step I'm going to ask, depending on
> > what Bittukumar finds from doing what I asked, is to perform a git
> > bisect. So my steps will be needed for that as well.
> >
> > --joanie
> >
> > On 07/13/2018 03:09 PM, Majid Hussain wrote:
> > > hi there,
> > > to save you the trouble of makeing and reinstalling orca from source I
> > > just created a .deb of it for you.
> > > this is with the gnome branch that was mentioned.
> > > erlia in this thread.
> > > it will override any "stable" versions of orca you may have installed,
> > > install location for this virsion is default, e.g
> > > /usr.
> > > here it is.
> > > https://github.com/mhussaincov/orcadebs/raw/master/orca_3.28.3pre-1_amd64.deb
> > >
> > > after you've downloaded this, do the folowing exactly as I write here:
> > > open a new terminal
> > > when the terminal window has opened cd to your downloads directory
> > > where firefox saves your files for me I would do this
> > > cd Downloads
> > >
> > > assuming that your downloads dir is the same as a default ubuntu install,
> > > just
> > > cd Downloads
> > > then you run this
> > > sudo dpkg -i orca_3.28.3pre-1_amd64.deb
> > >
> > >
> > > when you type that or copy and paste that a password prompt will show
> > > enter it
> > > the .deb should install.
> > > if this does not work type the folowing
> > > assuming you are still in your folder where firefox saves downloaded
> > > files write?
> > > make sure the orca file you just downloaded is the only .deb in that
> > > folder.
> > > type this
> > > sudo dpkg -i *.deb
> > > will install all debs in the folder
> > > should only be my orca deb.
> > > after it's finished,
> > > type
> > > orca --replace
> > > press alt plus f2 type
> > > orca --replace
> > >
> > > I hope this works for you,
> > > respond with questions or flames if everything goes up in smoke or well.
> > > Majid
> > >
> > > On 13/07/2018, bittukumar jaiswal via orca-list <orca-list gnome org>
> > > wrote:
> > > > Hello.
> > > > after git pull it says, already Up to date.
> > > > after  build (make) and install it
> > > > it give me an error:
> > > > build (make)
> > > > bash: syntax error near unexpected token ``make'
> > > > thanks
> > > >
> > > > On 7/13/18, Joanmarie Diggs <jdiggs igalia com> wrote:
> > > > > Well, let's try to confirm this before we talk about git bisect. Could
> > > > > you please try the following:
> > > > >
> > > > > 1. cd into your orca directory
> > > > > 2. git checkout gnome-3-28
> > > > > 3. git pull
> > > > > 4. build (make) and install it
> > > > > 5. quit Orca and re-launch it
> > > > > 6. in a terminal, type orca -v (you should get 3.28.3pre)
> > > > >
> > > > > Is Orca suddenly speedy?
> > > > >
> > > > > Thanks!
> > > > > --joanie
> > > > >
> > > > > On 07/13/2018 01:11 PM, bittukumar jaiswal via orca-list wrote:
> > > > > > yes I restarted the gnome. as you told me last time.
> > > > > > in stable version of orca it is very lite. not this much. now I don't
> > > > > > Know the exact time.
> > > > > > as of now I can say that this issue is only with Orca master.
> > > > > >
> > > > > >
> > > > > > On 7/13/18, Joanmarie Diggs <jdiggs igalia com> wrote:
> > > > > > > Hi Bittukumar.
> > > > > > >
> > > > > > > 1. Your steps suggest that this only happens in Orca master. Does it
> > > > > > > also happen in the stable version of Orca?
> > > > > > >
> > > > > > > 2. Did you try restarting gnome-shell (again, this is done with
> > > > > > > Alt+f2,
> > > > > > > then typing r, then pressing return).
> > > > > > >
> > > > > > > --joanie
> > > > > > >
> > > > > > > On 07/13/2018 12:44 PM, bittukumar jaiswal via orca-list wrote:
> > > > > > > > Hello,
> > > > > > > > Orca still response very late after updating the orca master.
> > > > > > > > steps to reproduce:
> > > > > > > > 1: press super+A
> > > > > > > > 2: use any navigation key or Tab to navigate throughout all
> > > > > > > > application
> > > > > > > > hear Orca will response very late, it will not speak any thing
> > > > > > > > except
> > > > > > > > [windo] then after 10 to 15 S it will announce whereever the focus
> > > > > > > > is.
> > > > > > > > if I type the name or first few letters of the application that I
> > > > > > > > want, still it takes time to speak.
> > > > > > > > I am not able to understan that, what is this issue? is it with Orca
> > > > > > > > or
> > > > > > > > Gnome?
> > > > > > > > Using: Ubuntu 18.04 with Gnome. Orca master [last updated yesterday]
> > > >
> > > >
> > > > --
> > > > Best regards
> > > > Bittukumar Jaiswal
> > > > technical assistant and trainer,
> > > > Snehankit Helpline.
> > > > E-Mail ID: bittukjaiswal gmail com
> > > > _______________________________________________
> > > > orca-list mailing list
> > > > orca-list gnome org
> > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > GNOME Universal Access guide:
> > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > > > Log bugs and feature requests at http://bugzilla.gnome.org