GNOME.org
 

Re: [orca-list] qt-at-spi 32 bit on arch


Yes, C.J., you more or less hit the nail on the head, but if I remember correctly my script was set up where 
it would work as long as a GUI was running, 
i.e. you could run it from a console if you had started your desktop. The original version I made required 
one to run the script from a terminal emulator, but 
I am pretty sure that the version on the website, same as the one I attached that did not make the list, had 
been tweaked to allow running from a console 
as long as ones desktop was running. 
If I uploaded an older version then you would have to run from your graphical interface in a termnal. 
I made a much better version a few months later, but had a minor issue that I do not remember left to fix as 
I recall, and do not have the time to test and 
if need be fix any problem now. This is mostly because it's been so long since I worked on this that it would 
take me a while to study things to try and 
recreate my thinking at the time I was playing with this. 
I tested yesterday and all was well, and made a change or two to not onlyu check for a properly installed 
skype, but to install it even though qt-qt-spi is 
not in main repos any more. 
There's little need for this work now that Peter has made a package that properly installs the 32bit 
accessiblebridge file for 64bit machines, so unless 
people tell me that the newly uploaded AUR qt-at-spi package is not working as it should I wilil move on to 
more productive work when I get back to 
scripting. I Had never put anything in to the AUR when I wrote this script, so I did things how I knew how to 
at the time, but having an AUR package that 
does the installation directly is obviously a much better approach. I have a very long to do list that I will 
get to when I can, and thank Peter for 
keeping creating a a good qt-at-spi package off that list.
While there are issues with skype on Linux now, (again one could say), many of us do still use it, and blind 
people should certainly have the option to use 
skype if they want to.
    
      


-- 
     B.H.
   Registerd Linux User 521886


  Christopher Chaltain wrote:
Mon, Jan 30, 2017 at 08:52:23PM -0600


Did you try this in  a console or on the desktop? Just based on the errors
below, I'm guessing that this install script is trying to connect to X and
you're running it in a session that doesn't have your display variable set.
If this is true, try running it in a terminal on the desktop.

On 30/01/17 20:27, Amir wrote:

Hi,

i followed all the instructions until sudo install-64bitskype.sh ,

then i got this:

GConf Error: Client failed to connect to the D-BUS daemon:
GConf Error: Client failed to connect to the D-BUS daemon:
Using X11 for dbus-daemon autolaunch was disabled at compile time, set
your DBUS
_SESSION_BUS_ADDRESS instead
GConf Error: Client failed to connect to the D-BUS daemon:
Using X11 for dbus-daemon autolaunch was disabled at compile time, set
your DBUS
GConf Error: Client failed to connect to the D-BUS daemon:
Using X11 for dbus-daemon autolaunch was disabled at compile time, set
your DBUS
_SESSION_BUS_ADDRESS instead



any help?

On 01/31/2017 10:02 AM, B. Henry wrote:

Well, I forgot about the very small msg size allowed on this list, and
the below was held.
I do not see the other message I sent in reply to myself where I
pasted in the readme in my sent folder, so I'll paste in here, in case
it did not post,
and send the quoted msg in case it did...lol
What a mess.
I think it did not go out actually, or may not have as my battery
died, maybe before I hit send on said msg. *Information about
inst64bitskype and instructions for an automated installation of skype
on 64bit Arch-Linux and F123 systems follows.
Anyway, just go to

http://fluxability.tk/downloads

  and look for the inst64bitskype package.
I spent a few minutes updating the script but have not had time to
test, so am just leaving this old version on the website for now, and
nothing else on
the site has been updated for months, so please accept my apology.
I'll get back to my computer related projects as soon as I can, but
have to give priority to family and offline stuff for a few more months.

*Information about inst64bitskype and instructions for an automated
installation of skype on 64bit Arch-Linux and F123 systems follows.

*Package files
The compressed folder where you found this README file should also
include:
The accessiblebridge directory where libqspiaccessiblebridge.so the
library required to make skype accessible on 64bit systems is found
install-64bitskkype.sh The script that installs skype and makes it
usable with Orca
MD5sum-installer.txt, Make sure the installer script is not corrupted
A todo file/ideas I have on how to improve inst64bitskype


*Prerequisits:
A computer running 64bit Arch-Linux, Manjaro or one of its diritive
distros such as F123.
Permission to perform administrative tasks including installing
software using pacman and working with files and folders owned by root.
A stable and hopefully fast connection to the internet as skype and
its dependencies make for a good sized download, 75+MB is typical.
If you already have Skype installed the download will be much smaller.

Pulse audio is required to talk on skype for Linux, but you will be
able to see the skype interface, add contacts, text chat, etc even if
you do not have pulse.
It is assumed that orca is installed and is working correctly.


*Usage
*Important note: Although the original script was  designed to be
executed from within your graphical interface, not from a log-in
tty-console. This has been changed so that you can use it even if you
do not have a GUI running. Ofcourse a graphical interface must be
running to use Skype.

 From the directory where you found this file run the following command.
sudo ./install-64bitskype.sh

*Detailed instructions
Open a terminal-emulator, or log-in to a console; and navigate to
the directory where you have inst64bitskype.tar.bz2, e.g. cd ~/Downloads.
Untar inst64bitskype by typing
tar xjf inst64bitskype.tar.bz2
Go in to the newly created directory with
cd inst64bitskype
Now just execute the script.
   sudo ./install-64bitskype.sh

You should normally not run this version of this script from a run dialog
or your desktop's dash as you will get no benefit at all from it
in fallback offline mode, and lose some functionality
even if you have a working connection to Arch servers.

You can also run with out sudo, but will have to type your password
multiple times
instead of just once; no good reason to do that.


*Logging/debugging
I can think of no reason that this script should not work for you
assuming you can connect to your arch or manjaro package mirrors
and you meet the basic requirements listed at the beginning of this file.
I suppose you could have made some overly restrictive permissions in
/usr/lib32/qt,
but if you are that paranoid  you surely know how to work around your
madness, and probably would not trust skype anyway...lol.
Some information is written to /tmp/inst64bitskype.data that you may
wish to look at.
I hope to make the logging a bit more useful in the future.
Remember that on most default Arch-Linux and Manjaro based systems /tmp
is cleaned up with each boot or reboot, so make a copy of the file
if you want to look at or share it later, e.g. to ask for help if you
feel really lost.
If you do have trouble, and or think of improvements for this script,
PLEASE contact me at
B.H. <burt1iband gmail com>



_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide:
https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org


-- 
Christopher (CJ)
chaltain at Gmail
_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]