[orca-list] Fwd: Re: Fw: Orca_Vinux

[timothyhobbs seznam cz]

Forwarding this back to the orca list...

Sorry, I don't know what kind of further sugestion to make.

Timothy
# ------------ Původní zpráva ------------
# Od: Renuka Warriar <erenuka gmail com>
# Komu: <timothyhobbs seznam cz>,
# Kopie:
# Předmět: Re: [orca-list] Fw: Orca_Vinux
# Datum: 15.2.2011 12:39:56
# ----------------------------------------
# No Sir,
# It didn't hang.  Rather it was silent and I could not do anything.  I used
# the default enus in plane English text to run the installer.
#
# Renuka E,
# Section Officer,
# ICT Centre for Visually Challlenged,
# CHMK Library,
# University ofCalicut,
# Malappuram Dist.,
# Kerala.
# ----- Original Message -----
# From: <timothyhobbs seznam cz>
# To: "Renuka Warriar" <erenuka gmail com>
# Sent: Tuesday, February 15, 2011 4:37 PM
# Subject: Re: [orca-list] Fw: Orca_Vinux
#
#
# Did it hang?  Or crash?  I see that little ^C before the command line, like
# you tried to exit out of a hanged Orca instance...
#
# That's an exception that Orca *should* catch gracefully. But one question,
# were you running the installer in a sanscrit or other "two or more" byte
# encoded language?
#
# In plain English:  What language were you running the installer in?
#
# Thanks,
# Timothy
# > ------------ Původní zpráva ------------
# > Od: Renuka Warriar <erenuka gmail com>
# > Předmět: [orca-list] Fw: Orca_Vinux
# > Datum: 15.2.2011 11:57:29
# > ----------------------------------------
# > Hi,
# > When I tried to instal vinux 3.0 in my office, the following error message
# > appeared and I don't know what is to be done.  Please help me.
# >
# > Renuka E,
# > Section Officer,
# > ICT Centre for Visually Challlenged,
# > CHMK Library,
# > University ofCalicut,
# > Malappuram Dist.,
# > Kerala
# > India.
# > ----- Original Message -----
# > From: "Renuka Warriar" <erenuka gmail com>
# > To: <james infidel gmail com>
# > Sent: Friday, January 28, 2011 2:15 PM
# > Subject: Orca_Vinux
# >
# >
# > > user user4:~$ sudo orca --replace
# > > [sudo] password for user:
# > >
# > > ** (orca:2928): WARNING **: Trying to register gtype 'WnckWindowState'
# > > as enum when in fact it is of type 'GFlags'
# > >
# > > ** (orca:2928): WARNING **: Trying to register gtype
# > > 'WnckWindowActions' as enum when in fact it is of type 'GFlags'
# > >
# > > ** (orca:2928): WARNING **: Trying to register gtype
# > > 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags'
# > > Traceback (most recent call last):
# > >  File "<string>", line 1, in <module>
# > >  File "/usr/lib/pymodules/python2.6/orca/orca.py", line 2213, in main
# > >    init(pyatspi.Registry)
# > >  File "/usr/lib/pymodules/python2.6/orca/orca.py", line 1620, in init
# > >    registry.registerEventListener(_onChildrenChanged,
# > >  File "/usr/lib/pymodules/python2.6/pyatspi/registry.py", line 331,
# > > in __getattribute__
# > >    raise RuntimeError('Could not find or activate registry')
# > > RuntimeError: Could not find or activate registry
# > > user user4:~$ orca
# > >
# > > ** (orca:2978): WARNING **: Trying to register gtype 'WnckWindowState'
# > > as enum when in fact it is of type 'GFlags'
# > >
# > > ** (orca:2978): WARNING **: Trying to register gtype
# > > 'WnckWindowActions' as enum when in fact it is of type 'GFlags'
# > >
# > > ** (orca:2978): WARNING **: Trying to register gtype
# > > 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags'
# > > Traceback (most recent call last):
# > >  File "/usr/lib/pymodules/python2.6/orca/liveregions.py", line 218,
# > > in pumpMessages
# > >    self._script.presentMessage(utts)
# > >  File "/usr/lib/pymodules/python2.6/orca/default.py", line 5415, in
# > > presentMessage
# > >    speech.speak(message, voice)
# > >  File "/usr/lib/pymodules/python2.6/orca/speech.py", line 256, in speak
# > >    _speak(string, activeVoice, interrupt)
# > >  File "/usr/lib/pymodules/python2.6/orca/speech.py", line 169, in _speak
# > >    text = orca_state.activeScript.utilities.adjustForPronunciation(text)
# > >  File "/usr/lib/pymodules/python2.6/orca/script_utilities.py", line
# > > 2436, in adjustForPronunciation
# > >    words = self.WORDS_RE.split(line.decode("UTF-8"))
# > >  File "/usr/lib/python2.6/encodings/utf_8.py", line 16, in decode
# > >    return codecs.utf_8_decode(input, errors, True)
# > > UnicodeDecodeError: 'utf8' codec can't decode byte 0xc2 in position
# > > 74: invalid continuation byte
# > > ^Cuser user4:~$
# >
# > _______________________________________________
# > orca-list mailing list
# > orca-list gnome org
# > http://mail.gnome.org/mailman/listinfo/orca-list
# > Visit http://live.gnome.org/Orca for more information on Orca.
# > The manual is at
# > http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html
# > The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
# > Netiquette Guidelines are at
# > http://live.gnome.org/Orca/FrequentlyAskedQuestions/NetiquetteGuidelines
# > Log bugs and feature requests at http://bugzilla.gnome.org
# > Find out how to help at http://live.gnome.org/Orca/HowCanIHelp
# >
# >
# >
#
#
#