GNOME.org
 

Re: [gnome-love] compiling gnome-hello

On my machine (Suse 9.3) I manage to get the sources configured, so I
can attempt the make. But then make then fails  :-(

I started by doing just what you did: running autogen.sh

Maybe any of this output (below) is of help to you? Also, on my computer
at least, I can configure and build the gnome-terminal sources without
much problem.

Also, when you report that the output says, for instance,
"glib-gettext.m4 not found", have you checked if it's installed on your
system? This is what I see on mine:


locate glib-gettext.m4

/opt/gnome/share/aclocal/glib-gettext.m4

 rpm -qf /opt/gnome/share/aclocal/glib-gettext.m4

glib2-devel-2.6.3-4

Darren

PS. I'm a newbie myself... so not sure if what I'm providing you is too
helpful.

---------

/opt/gnome/bin/gnome-autogen.sh
checking for autoconf >= 2.53...
  testing autoconf2.50... not found.
  testing autoconf... found 2.59
checking for automake >= 1.8...
  testing automake-1.8... not found.
  testing automake-1.9... found 1.9.5
checking for libtool >= 1.4.3...
  testing libtoolize... found 1.5.14
checking for glib-gettext >= 2.2.0...
  testing glib-gettextize... found 2.6.3
checking for intltool >= 0.25...
  testing intltoolize... found 0.33
checking for pkg-config >= 0.14.0...
  testing pkg-config... found 0.15.0
checking for gnome-common >= 2.3.0...
  testing gnome-doc-common... found 2.8.0
Checking for required M4 macros...
Checking for forbidden M4 macros...
**Warning**: I am going to run `configure' with no arguments.
If you wish to pass any to it, please specify them on the
`./autogen.sh' command line.

Processing ./configure.ac
Running libtoolize...
Running glib-gettextize... Ignore non-fatal messages.
Copying file mkinstalldirs
Copying file po/Makefile.in.in

Please add the files
  codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
  progtest.m4
from the /opt/gnome/share/aclocal directory to your autoconf macro
directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.

Running intltoolize...
no need for patching file 'Makefile.in.in'
Running gnome-doc-common...
Running aclocal-1.9...
/usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of
AM_PATH_SMPEG
  run info '(automake)Extending aclocal'
  or see
http://sources.redhat.com/automake/automake.html#Extending-aclocal
Running autoconf...
Running autoheader...
Running automake-1.9...
Running ./configure --enable-maintainer-mode ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles...
yes
checking for intltool >= 0.21... 0.33 found
checking for perl... /usr/bin/perl
checking for XML::Parser... ok
checking for iconv... /usr/bin/iconv
checking for msgfmt... /usr/bin/msgfmt
checking for msgmerge... /usr/bin/msgmerge
checking for xgettext... /usr/bin/xgettext
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for library containing strerror... none required
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking build system type... i686-suse-linux
checking host system type... i686-suse-linux
checking for a sed that does not truncate output... /usr/bin/sed
checking for ld used by gcc... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/i586-suse-linux/bin/ld option to reload object
files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... g77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether g77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports
shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics...
cat: /etc/ld.so.conf.d/*.conf: No such file or directory
GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports
shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports
shared libraries... yes
checking dynamic linker characteristics...
cat: /etc/ld.so.conf.d/*.conf: No such file or directory
GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for g77 option to produce PIC... -fPIC
checking if g77 PIC flag -fPIC works... yes
checking if g77 supports -c -o file.o... yes
checking whether the g77 linker (/usr/i586-suse-linux/bin/ld) supports
shared libraries... yes
checking dynamic linker characteristics...
cat: /etc/ld.so.conf.d/*.conf: No such file or directory
GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking what warning flags to pass to the C compiler... -Wall
-Wmissing-prototypes
checking what language compliance flags to pass to the C compiler...
checking for pkg-config... /usr/bin/pkg-config
checking for libgnome-2.0 >= 2.9.0    libgnomeui-2.0 >= 2.9.0    gtk
+-2.0 >= 2.5.0... yes
checking GNOME_HELLO_CFLAGS... -DORBIT2=1 -pthread -DXTHREADS
-D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/libart-2.0
-I/usr/include/libxml2 -I/opt/gnome/include/libgnome-2.0
-I/opt/gnome/include/glib-2.0 -I/opt/gnome/lib/glib-2.0/include
-I/opt/gnome/include/orbit-2.0 -I/opt/gnome/include/libbonobo-2.0
-I/opt/gnome/include/gconf/2 -I/opt/gnome/include/gnome-vfs-2.0
-I/opt/gnome/lib/gnome-vfs-2.0/include
-I/opt/gnome/include/bonobo-activation-2.0
-I/opt/gnome/include/libgnomeui-2.0
-I/opt/gnome/include/libgnomecanvas-2.0 -I/opt/gnome/include/gtk-2.0
-I/opt/gnome/include/libbonoboui-2.0 -I/opt/gnome/include/pango-1.0
-I/usr/include/freetype2 -I/opt/gnome/lib/gtk-2.0/include
-I/usr/X11R6/include -I/opt/gnome/include/atk-1.0
-I/usr/include/freetype2/config
checking GNOME_HELLO_LIBS... -Wl,--export-dynamic -pthread
-L/opt/gnome/lib -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2
-lxml2 -lpthread -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2
-lpangoft2-1.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation
-lORBit-2 -lgthread-2.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0
-lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0
-lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
checking for scrollkeeper-config... /usr/bin/scrollkeeper-config
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for catalogs to be installed...  am az be bg ca cs da de el
en_CA en_GB es fi fr gl he hr id it ja ka lv mn ms nl nn no pa pl pt
pt_BR ru rw sk sr sr@Latn sv tr uk vi wa zh_CN zh_TW
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating po/Makefile.in
config.status: creating pixmaps/Makefile
config.status: creating help/Makefile
config.status: creating help/C/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing intltool commands
config.status: executing depfiles commands
config.status: executing default-1 commands
Now type `make' to compile gnome-hello


HERE I TYPE MAKE


make  all-recursive
Making all in po
make[2]: Nothing to be done for `all'.
Making all in src
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -DORBIT2=1 -pthread -DXTHREADS
-D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/libart-2.0
-I/usr/include/libxml2 -I/opt/gnome/include/libgnome-2.0
-I/opt/gnome/include/glib-2.0 -I/opt/gnome/lib/glib-2.0/include
-I/opt/gnome/include/orbit-2.0 -I/opt/gnome/include/libbonobo-2.0
-I/opt/gnome/include/gconf/2 -I/opt/gnome/include/gnome-vfs-2.0
-I/opt/gnome/lib/gnome-vfs-2.0/include
-I/opt/gnome/include/bonobo-activation-2.0
-I/opt/gnome/include/libgnomeui-2.0
-I/opt/gnome/include/libgnomecanvas-2.0 -I/opt/gnome/include/gtk-2.0
-I/opt/gnome/include/libbonoboui-2.0 -I/opt/gnome/include/pango-1.0
-I/usr/include/freetype2 -I/opt/gnome/lib/gtk-2.0/include
-I/usr/X11R6/include -I/opt/gnome/include/atk-1.0
-I/usr/include/freetype2/config   -DG_LOG_DOMAIN=\"GnomeHello\"
-DDATADIR=\""/usr/local/share"\" -DG_DISABLE_DEPRECATED
-DGTK_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED
-DGNOME_DISABLE_DEPRECATED    -g -O2 -MT app.o -MD -MP -MF
".deps/app.Tpo" -c -o app.o app.c; \
then mv -f ".deps/app.Tpo" ".deps/app.Po"; else rm -f ".deps/app.Tpo";
exit 1; fi
app.c: In function `button_click_cb':
app.c:165: error: too few arguments to function `g_utf8_strreverse'
make[2]: *** [app.o] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2


On Mon, 2005-10-24 at 22:50 +0100, Joachim Noreiko wrote:

Hi list.
Another newbie's rolled in ;)

I'm trying to compile gnome-terminal... yes, this is
way beyond my capabilities, but there's a bug in it
that's bugging me ;)

So I thought I'd try something simpler and I found the
gnome-hello module.

I found this document which seems to go with it:
http://developer.gnome.org/doc/GGAD/ggad.html

However it talks a lot about Gnome 1.0. Is it up to
date?

I got a bit lost halfway down the 'Creating Your
Source Tree' page with all the talk of automake,
autoconf, etc.
Then this bit amused me: "A file called INSTALL that
explains how to compile and install the package."
gnome-hello doesn't have an INSTALL file ;)

Not to be deterred, I tried running autogen.sh and got
a lot of errors, such as:

  gnome-compiler-flags.m4 not found
  libtool.m4 not found
  glib-gettext.m4 not found
  intltool.m4 not found
  pkg.m4 not found

Is there an idiot-proof guide to getting started that
I haven't found yet?
Failing that, do you need help writing one?

Joachim



              
___________________________________________________________ 
How much free photo storage do you get? Store your holiday 
snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
_______________________________________________
gnome-love mailing list
gnome-love gnome org
http://mail.gnome.org/mailman/listinfo/gnome-love
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]