Re: How to configure a DHCP + (2nd) Static address (eg on eth0+eth0:0)?

["Derek Atkins" <derek ihtfp com>]

Hi,

Upgrading to NM 1.0.6 seems to have fixed the issue.
Sorry for the noise.
I suppose I should have checked to make sure I was at the current version
first.

-derek

On Thu, October 1, 2015 3:30 pm, Derek Atkins wrote:
> Hi,
>
> On Thu, October 1, 2015 2:51 pm, Dan Williams wrote:
> > On Thu, 2015-10-01 at 13:34 -0400, Derek Atkins wrote:
> > > Hi Dan,
> > >
> > > On Thu, October 1, 2015 12:49 pm, Dan Williams wrote:
> > >
> > > Apparently this still isn't working.  I did the following:
> > >
> > > # cat /etc/sysconfig/network-scripts/ifcfg-eth0
> > > TYPE=Ethernet
> > > BOOTPROTO=dhcp
> > > DEFROUTE=yes
> > > IPV4_FAILURE_FATAL=no
> > > UUID=3a02edd8-e82d-4dca-a336-933e9177f4cd
> > > DEVICE=eth0
> > > ONBOOT=yes
> > > HWADDR=00:1f:7b:b2:14:42
> > > IPV6_FAILURE_FATAL=no
> > > NAME=eth0
> > > # cat /etc/sysconfig/network-scripts/ifcfg-eth0:1
> > > DEVICE=eth0:1
> > > IPADDR=192.168.x.y
> >
> > I tested the config here and at least git master NM accepts the DHCP +
> > aliases configuration.  After doing 'nmcli con reload' could you do
> > "nmcli con show 3a02edd8-e82d-4dca-a336-933e9177f4cd" and post the
> > output for the IPv4 block?
>
> This is running on F22, NetworkManager-1.0.2-1.fc22.armv7hl
>
> I presume you mean:
> ipv4.method:                            auto
> ipv4.dns:
> ipv4.dns-search:
> ipv4.addresses:
> ipv4.gateway:                           --
> ipv4.routes:
> ipv4.route-metric:                      -1
> ipv4.ignore-auto-routes:                no
> ipv4.ignore-auto-dns:                   no
> ipv4.dhcp-client-id:                    --
> ipv4.dhcp-send-hostname:                yes
> ipv4.dhcp-hostname:                     --
> ipv4.never-default:                     no
> ipv4.may-fail:                          yes
>
> or do you also want:
>
> IP4.ADDRESS[1]:                         <DHCP Address>/24
> IP4.GATEWAY:                            <DHCP Router>
> IP4.ROUTE[1]:                           dst = <DHCP Server IP>/32, nh =
> <DHCP Router>, mt = 100
> IP4.DNS[1]:                             <DNS1>
> IP4.DNS[2]:                             <DNS2>
> IP4.DNS[3]:                             <DNS3>
> IP4.DOMAIN[1]:                          ihtfp.org
>
> I just noticed there is an update available; I can try updating to 1.0.6
> to see if it solves the problem?
>
> > Dan
>
> -derek
>
> --
>        Derek Atkins                 617-623-3745
>        derek ihtfp com             www.ihtfp.com
>        Computer and Internet Security Consultant


-- 
       Derek Atkins                 617-623-3745
       derek ihtfp com             www.ihtfp.com
       Computer and Internet Security Consultant