[PATCH 1/8] bonding: settings parser for ifcfg plugin + NMSettingBond class



Introduced a new TYPE=bond for ifcfg-rh configuration files.
Alternatively BONDING_MASTER=yes can be specified instead of
setting the type explicitely to maintain backwards compatibility
with existing configuration files.

Bonding device files require a DEVICE= line to be present which
specifies the virtual bonding interface in the kernel. We do not
allow auto-generation of the name in order to keep confusion to
a minimum when reusing existing bonding interfaces.

The BONDING_OPTS= parameter can be used to specify various bonding
related options, such as:
  - mode
  - miimon
  - updelay
  - downdelay
  - arp_interval
  - arp_ip_target

By default, the NMSettingBond class uses a miimon value of 100 which
seems like a sensible default value for 99% of all configurations.
If this is not suitable, an arp_ip_target needs to be specified
manually.

A writer is not yet implemented.

Changes v2:
 - renamed DeviceName property to InterfaceName
 - moved code to validate device name to dev_valid_name() for future use

Signed-off-by: Thomas Graf <tgraf redhat com>
---
 libnm-util/Makefile.am                 |    2 +
 libnm-util/libnm-util.ver              |   12 +
 libnm-util/nm-connection.c             |   25 ++-
 libnm-util/nm-connection.h             |    2 +
 libnm-util/nm-setting-bond.c           |  563 ++++++++++++++++++++++++++++++++
 libnm-util/nm-setting-bond.h           |   94 ++++++
 src/settings/plugins/ifcfg-rh/common.h |    3 +-
 src/settings/plugins/ifcfg-rh/reader.c |  163 +++++++++-
 8 files changed, 857 insertions(+), 7 deletions(-)
 create mode 100644 libnm-util/nm-setting-bond.c
 create mode 100644 libnm-util/nm-setting-bond.h

diff --git a/libnm-util/Makefile.am b/libnm-util/Makefile.am
index 1529b4a..324847c 100644
--- a/libnm-util/Makefile.am
+++ b/libnm-util/Makefile.am
@@ -15,6 +15,7 @@ libnm_util_include_HEADERS = 		\
 	nm-setting.h			\
 	nm-setting-8021x.h		\
 	nm-setting-bluetooth.h		\
+	nm-setting-bond.h		\
 	nm-setting-connection.h		\
 	nm-setting-ip4-config.h		\
 	nm-setting-ip6-config.h		\
@@ -44,6 +45,7 @@ libnm_util_la_csources = \
 	nm-setting.c			\
 	nm-setting-8021x.c		\
 	nm-setting-bluetooth.c		\
+	nm-setting-bond.c		\
 	nm-setting-connection.c		\
 	nm-setting-ip4-config.c		\
 	nm-setting-ip6-config.c		\
diff --git a/libnm-util/libnm-util.ver b/libnm-util/libnm-util.ver
index edf5d29..5e2f66b 100644
--- a/libnm-util/libnm-util.ver
+++ b/libnm-util/libnm-util.ver
@@ -16,6 +16,7 @@ global:
 	nm_connection_get_setting;
 	nm_connection_get_setting_802_1x;
 	nm_connection_get_setting_bluetooth;
+	nm_connection_get_setting_bond;
 	nm_connection_get_setting_by_name;
 	nm_connection_get_setting_cdma;
 	nm_connection_get_setting_connection;
@@ -166,6 +167,17 @@ global:
 	nm_setting_bluetooth_get_connection_type;
 	nm_setting_bluetooth_get_type;
 	nm_setting_bluetooth_new;
+	nm_setting_bond_error_get_type;
+	nm_setting_bond_error_quark;
+	nm_setting_bond_new;
+	nm_setting_bond_get_type;
+	nm_setting_bond_get_interface_name;
+	nm_setting_bond_get_mode;
+	nm_setting_bond_get_miimon;
+	nm_setting_bond_get_downdelay;
+	nm_setting_bond_get_updelay;
+	nm_setting_bond_get_arp_interval;
+	nm_setting_bond_get_arp_ip_target;
 	nm_setting_cdma_error_get_type;
 	nm_setting_cdma_error_quark;
 	nm_setting_cdma_get_number;
diff --git a/libnm-util/nm-connection.c b/libnm-util/nm-connection.c
index d59c8b4..0fec83a 100644
--- a/libnm-util/nm-connection.c
+++ b/libnm-util/nm-connection.c
@@ -44,6 +44,7 @@
 #include "nm-setting-wireless-security.h"
 #include "nm-setting-vpn.h"
 #include "nm-setting-olpc-mesh.h"
+#include "nm-setting-bond.h"
 
 #include "nm-setting-serial.h"
 #include "nm-setting-gsm.h"
@@ -135,7 +136,7 @@ static guint signals[LAST_SIGNAL] = { 0 };
 
 static GHashTable *registered_settings = NULL;
 
-#define DEFAULT_MAP_SIZE 16
+#define DEFAULT_MAP_SIZE 17
 
 static struct SettingInfo {
 	const char *name;
@@ -242,6 +243,11 @@ register_default_settings (void)
 	                      NM_SETTING_WIMAX_ERROR,
 	                      1, TRUE);
 
+	register_one_setting (NM_SETTING_BOND_SETTING_NAME,
+			      NM_TYPE_SETTING_BOND,
+			      NM_SETTING_BOND_ERROR,
+			      1, TRUE);
+
 	register_one_setting (NM_SETTING_WIRELESS_SECURITY_SETTING_NAME,
 	                      NM_TYPE_SETTING_WIRELESS_SECURITY,
 	                      NM_SETTING_WIRELESS_SECURITY_ERROR,
@@ -1308,6 +1314,23 @@ nm_connection_get_setting_bluetooth (NMConnection *connection)
 }
 
 /**
+ * nm_connection_get_setting_bond:
+ * @connection: the #NMConnection
+ *
+ * A shortcut to return any #NMSettingBond the connection might contain.
+ *
+ * Returns: (transfer none): an #NMSettingBond if the connection contains one, otherwise NULL
+ **/
+NMSettingBond *
+nm_connection_get_setting_bond (NMConnection *connection)
+{
+	g_return_val_if_fail (connection != NULL, NULL);
+	g_return_val_if_fail (NM_IS_CONNECTION (connection), NULL);
+
+	return (NMSettingBond *) nm_connection_get_setting (connection, NM_TYPE_SETTING_BOND);
+}
+
+/**
  * nm_connection_get_setting_cdma:
  * @connection: the #NMConnection
  *
diff --git a/libnm-util/nm-connection.h b/libnm-util/nm-connection.h
index 3245f7e..b99a7cc 100644
--- a/libnm-util/nm-connection.h
+++ b/libnm-util/nm-connection.h
@@ -32,6 +32,7 @@
 
 #include <nm-setting-8021x.h>
 #include <nm-setting-bluetooth.h>
+#include <nm-setting-bond.h>
 #include <nm-setting-cdma.h>
 #include <nm-setting-connection.h>
 #include <nm-setting-gsm.h>
@@ -181,6 +182,7 @@ const char *  nm_connection_get_id        (NMConnection *connection);
 
 NMSetting8021x *           nm_connection_get_setting_802_1x            (NMConnection *connection);
 NMSettingBluetooth *       nm_connection_get_setting_bluetooth         (NMConnection *connection);
+NMSettingBond *            nm_connection_get_setting_bond              (NMConnection *connection);
 NMSettingCdma *            nm_connection_get_setting_cdma              (NMConnection *connection);
 NMSettingConnection *      nm_connection_get_setting_connection        (NMConnection *connection);
 NMSettingGsm *             nm_connection_get_setting_gsm               (NMConnection *connection);
diff --git a/libnm-util/nm-setting-bond.c b/libnm-util/nm-setting-bond.c
new file mode 100644
index 0000000..10d211d
--- /dev/null
+++ b/libnm-util/nm-setting-bond.c
@@ -0,0 +1,563 @@
+/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */
+
+/*
+ * Thomas Graf <tgraf redhat com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301 USA.
+ *
+ * (C) Copyright 2011 Red Hat, Inc.
+ */
+
+#include <string.h>
+#include <ctype.h>
+#include <dbus/dbus-glib.h>
+
+#include "nm-setting-bond.h"
+#include "nm-param-spec-specialized.h"
+#include "nm-utils.h"
+#include "nm-utils-private.h"
+#include "nm-dbus-glib-types.h"
+
+/**
+ * SECTION:nm-setting-bond
+ * @short_description: Describes connection properties for bonds
+ * @include: nm-setting-bond.h
+ *
+ * The #NMSettingBond object is a #NMSetting subclass that describes properties
+ * necessary for bond connections.
+ **/
+
+/**
+ * nm_setting_bond_error_quark:
+ *
+ * Registers an error quark for #NMSettingBond if necessary.
+ *
+ * Returns: the error quark used for #NMSettingBond errors.
+ **/
+GQuark
+nm_setting_bond_error_quark (void)
+{
+	static GQuark quark;
+
+	if (G_UNLIKELY (!quark))
+		quark = g_quark_from_static_string ("nm-setting-bond-error-quark");
+	return quark;
+}
+
+/* This should really be standard. */
+#define ENUM_ENTRY(NAME, DESC) { NAME, "" #NAME "", DESC }
+
+GType
+nm_setting_bond_error_get_type (void)
+{
+	static GType etype = 0;
+
+	if (etype == 0) {
+		static const GEnumValue values[] = {
+			/* Unknown error. */
+			ENUM_ENTRY (NM_SETTING_BOND_ERROR_UNKNOWN, "UnknownError"),
+			/* The specified property was invalid. */
+			ENUM_ENTRY (NM_SETTING_BOND_ERROR_INVALID_PROPERTY, "InvalidProperty"),
+			/* The specified property was missing and is required. */
+			ENUM_ENTRY (NM_SETTING_BOND_ERROR_MISSING_PROPERTY, "MissingProperty"),
+			{ 0, 0, 0 }
+		};
+
+		etype = g_enum_register_static ("NMSettingBondError", values);
+	}
+
+	return etype;
+}
+
+
+G_DEFINE_TYPE (NMSettingBond, nm_setting_bond, NM_TYPE_SETTING)
+
+#define NM_SETTING_BOND_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_SETTING_BOND, NMSettingBondPrivate))
+
+typedef struct {
+	char *	interface_name;
+	char *	mode;
+	guint32	miimon;
+	guint32	downdelay;
+	guint32	updelay;
+	guint32	arp_interval;
+	char *	arp_ip_target;
+} NMSettingBondPrivate;
+
+enum {
+	PROP_0,
+	PROP_INTERFACE_NAME,
+	PROP_MODE,
+	PROP_MIIMON,
+	PROP_DOWNDELAY,
+	PROP_UPDELAY,
+	PROP_ARP_INTERVAL,
+	PROP_ARP_IP_TARGET,
+	LAST_PROP
+};
+
+/**
+ * nm_setting_bond_new:
+ *
+ * Creates a new #NMSettingBond object with default values.
+ *
+ * Returns: (transfer full): the new empty #NMSettingBond object
+ **/
+NMSetting *
+nm_setting_bond_new (void)
+{
+	return (NMSetting *) g_object_new (NM_TYPE_SETTING_BOND, NULL);
+}
+
+/**
+ * nm_setting_bond_get_interface_name
+ * @setting: the #NMSettingBond
+ *
+ * Returns: the #NMSettingBond:interface-name property of the setting
+ **/
+const char *
+nm_setting_bond_get_interface_name (NMSettingBond *setting)
+{
+	g_return_val_if_fail (NM_IS_SETTING_BOND (setting), 0);
+
+	return NM_SETTING_BOND_GET_PRIVATE (setting)->interface_name;
+}
+
+/**
+ * nm_setting_bond_get_mode:
+ * @setting: the #NMSettingBond
+ *
+ * Returns: the #NMSettingBond:mode property of the setting
+ **/
+const char *
+nm_setting_bond_get_mode (NMSettingBond *setting)
+{
+	g_return_val_if_fail (NM_IS_SETTING_BOND (setting), 0);
+
+	return NM_SETTING_BOND_GET_PRIVATE (setting)->mode;
+}
+
+/**
+ * nm_setting_bond_get_miimon:
+ * @setting: the #NMSettingBond
+ *
+ * Returns: the #NMSettingBond:miimon property of the setting
+ **/
+guint32
+nm_setting_bond_get_miimon (NMSettingBond *setting)
+{
+	g_return_val_if_fail (NM_IS_SETTING_BOND (setting), 0);
+
+	return NM_SETTING_BOND_GET_PRIVATE (setting)->miimon;
+}
+
+/**
+ * nm_setting_bond_get_downdelay:
+ * @setting: the #NMSettingBond
+ *
+ * Returns: the #NMSettingBond:downdelay property of the setting
+ **/
+guint32
+nm_setting_bond_get_downdelay (NMSettingBond *setting)
+{
+	g_return_val_if_fail (NM_IS_SETTING_BOND (setting), 0);
+
+	return NM_SETTING_BOND_GET_PRIVATE (setting)->downdelay;
+}
+
+/**
+ * nm_setting_bond_get_updelay:
+ * @setting: the #NMSettingBond
+ *
+ * Returns: the #NMSettingBond:updelay property of the setting
+ **/
+guint32
+nm_setting_bond_get_updelay (NMSettingBond *setting)
+{
+	g_return_val_if_fail (NM_IS_SETTING_BOND (setting), 0);
+
+	return NM_SETTING_BOND_GET_PRIVATE (setting)->updelay;
+}
+
+/**
+ * nm_setting_bond_get_arp_interval:
+ * @setting: the #NMSettingBond
+ *
+ * Returns: the #NMSettingBond:arp_interval property of the setting
+ **/
+guint32
+nm_setting_bond_get_arp_interval (NMSettingBond *setting)
+{
+	g_return_val_if_fail (NM_IS_SETTING_BOND (setting), 0);
+
+	return NM_SETTING_BOND_GET_PRIVATE (setting)->arp_interval;
+}
+
+/**
+ * nm_setting_bond_get_arp_ip_target:
+ * @setting: the #NMSettingBond
+ *
+ * Returns: the #NMSettingBond:arp_ip_target property of the setting
+ **/
+const char *
+nm_setting_bond_get_arp_ip_target (NMSettingBond *setting)
+{
+	g_return_val_if_fail (NM_IS_SETTING_BOND (setting), 0);
+
+	return NM_SETTING_BOND_GET_PRIVATE (setting)->arp_ip_target;
+}
+
+/*
+ * This function is a 1:1 copy of the kernel's
+ * dev_valid_name() in net/core/dev.c
+ */
+static gboolean
+dev_valid_name(const char *name)
+{
+       	if (*name == '\0')
+                return FALSE;
+
+       	if (strlen(name) >= 16)
+                return FALSE;
+
+       	if (!strcmp(name, ".") || !strcmp(name, ".."))
+               	return FALSE;
+
+        while (*name) {
+               	if (*name == '/' || isspace(*name))
+                        return FALSE;
+                name++;
+        }
+
+        return TRUE;
+}
+
+static gboolean
+verify (NMSetting *setting, GSList *all_settings, GError **error)
+{
+	NMSettingBondPrivate *priv = NM_SETTING_BOND_GET_PRIVATE (setting);
+	const char *valid_modes[] = {	"balance-rr",
+					"active-backup",
+					"balance-xor",
+					"broadcast",
+					"802.3ad",
+					"balance-tlb",
+					"balance-alb",
+					NULL };
+
+	if (!priv->interface_name || !strlen(priv->interface_name)) {
+		g_set_error (error,
+		             NM_SETTING_BOND_ERROR,
+		             NM_SETTING_BOND_ERROR_MISSING_PROPERTY,
+		             NM_SETTING_BOND_INTERFACE_NAME);
+		return FALSE;
+	}
+
+	if (!dev_valid_name (priv->interface_name)) {
+		g_set_error (error,
+		             NM_SETTING_BOND_ERROR,
+		             NM_SETTING_BOND_ERROR_INVALID_PROPERTY,
+		             NM_SETTING_BOND_INTERFACE_NAME);
+		return FALSE;
+	}
+
+	if (priv->mode && !_nm_utils_string_in_list (priv->mode, valid_modes)) {
+		g_set_error (error,
+		             NM_SETTING_BOND_ERROR,
+		             NM_SETTING_BOND_ERROR_INVALID_PROPERTY,
+		             NM_SETTING_BOND_MODE);
+		return FALSE;
+	}
+
+	/* XXX: Validate arp-ip-target */
+
+	return TRUE;
+}
+
+static void
+nm_setting_bond_init (NMSettingBond *setting)
+{
+	g_object_set (setting, NM_SETTING_NAME, NM_SETTING_BOND_SETTING_NAME,
+			       NM_SETTING_BOND_MIIMON, 100, /* default: miimon=100 */
+			       NULL);
+}
+
+static void
+finalize (GObject *object)
+{
+	NMSettingBondPrivate *priv = NM_SETTING_BOND_GET_PRIVATE (object);
+
+	g_free (priv->interface_name);
+	g_free (priv->mode);
+	g_free (priv->arp_ip_target);
+
+	G_OBJECT_CLASS (nm_setting_bond_parent_class)->finalize (object);
+}
+
+static void
+set_property (GObject *object, guint prop_id,
+              const GValue *value, GParamSpec *pspec)
+{
+	NMSettingBondPrivate *priv = NM_SETTING_BOND_GET_PRIVATE (object);
+
+	switch (prop_id) {
+	case PROP_INTERFACE_NAME:
+		priv->interface_name = g_value_dup_string (value);
+		break;
+	case PROP_MODE:
+		priv->mode = g_value_dup_string (value);
+		break;
+	case PROP_MIIMON:
+		priv->miimon = g_value_get_uint (value);
+		break;
+	case PROP_DOWNDELAY:
+		priv->downdelay = g_value_get_uint (value);
+		break;
+	case PROP_UPDELAY:
+		priv->updelay = g_value_get_uint (value);
+		break;
+	case PROP_ARP_INTERVAL:
+		priv->arp_interval = g_value_get_uint (value);
+		break;
+	case PROP_ARP_IP_TARGET:
+		g_free (priv->arp_ip_target);
+		priv->arp_ip_target = g_value_dup_string (value);
+		break;
+	default:
+		G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
+		break;
+	}
+}
+
+static void
+get_property (GObject *object, guint prop_id,
+              GValue *value, GParamSpec *pspec)
+{
+	NMSettingBond *setting = NM_SETTING_BOND (object);
+
+	switch (prop_id) {
+	case PROP_INTERFACE_NAME:
+		g_value_set_string (value, nm_setting_bond_get_interface_name (setting));
+		break;
+	case PROP_MODE:
+		g_value_set_string (value, nm_setting_bond_get_mode (setting));
+		break;
+	case PROP_MIIMON:
+		g_value_set_uint (value, nm_setting_bond_get_miimon (setting));
+		break;
+	case PROP_DOWNDELAY:
+		g_value_set_uint (value, nm_setting_bond_get_downdelay (setting));
+		break;
+	case PROP_UPDELAY:
+		g_value_set_uint (value, nm_setting_bond_get_updelay (setting));
+		break;
+	case PROP_ARP_INTERVAL:
+		g_value_set_uint (value, nm_setting_bond_get_arp_interval (setting));
+		break;
+	case PROP_ARP_IP_TARGET:
+		g_value_set_string (value, nm_setting_bond_get_arp_ip_target (setting));
+		break;
+	default:
+		G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
+		break;
+	}
+}
+
+static void
+nm_setting_bond_class_init (NMSettingBondClass *setting_class)
+{
+	GObjectClass *object_class = G_OBJECT_CLASS (setting_class);
+	NMSettingClass *parent_class = NM_SETTING_CLASS (setting_class);
+
+	g_type_class_add_private (setting_class, sizeof (NMSettingBondPrivate));
+
+	/* virtual methods */
+	object_class->set_property = set_property;
+	object_class->get_property = get_property;
+	object_class->finalize     = finalize;
+	parent_class->verify       = verify;
+
+	/* Properties */
+	/**
+	 * NMSettingBond:interface-name:
+	 *
+	 * Name of virtual kernel interface
+	 **/
+	g_object_class_install_property
+		(object_class, PROP_INTERFACE_NAME,
+		 g_param_spec_string (NM_SETTING_BOND_INTERFACE_NAME,
+						  "InterfaceName",
+						  "The name of the virtual in-kernel bonding nework interface",
+						  NULL,
+						  G_PARAM_READWRITE | NM_SETTING_PARAM_SERIALIZE));
+
+	/**
+	 * NMSettingBond:mode:
+	 *
+	 * Bonding policy
+	 **/
+	g_object_class_install_property
+		(object_class, PROP_MODE,
+		 g_param_spec_string (NM_SETTING_BOND_MODE,
+						  "Mode",
+						  "The bonding policy to use. One of 'balance-rr' (default), "
+						  "'active-backup', 'balance-xor', 'broadcast', '802.3ad', "
+						  "'balance-tlb', 'balance-alb'.",
+						  NULL,
+						  G_PARAM_READWRITE | NM_SETTING_PARAM_SERIALIZE));
+
+	/**
+	 * NMSettingBond:miimon:
+	 *
+	 * Specifies the MII link monitoring frequency in milliseconds.
+	 * This determines how often the link state of each slave is
+	 * inspected for link failures.  A value of zero disables MII
+	 * link monitoring.  A value of 100 is a good starting point.
+	 * The use_carrier option, below, affects how the link state is
+	 * determined.
+	 **/
+	g_object_class_install_property
+		(object_class, PROP_MIIMON,
+		 g_param_spec_uint (NM_SETTING_BOND_MIIMON,
+						"MiiMon",
+						"Specifies the MII link monitoring frequency in milliseconds. "
+						"This determines how often the link state of each slave is "
+						"inspected for link failures.  A value of zero disables MII "
+						"link monitoring.  A value of 100 is a good starting point. "
+						"The use_carrier option, below, affects how the link state is "
+						"determined. The default value is 0.",
+						0, G_MAXUINT32, 0,
+						G_PARAM_READWRITE | G_PARAM_CONSTRUCT | NM_SETTING_PARAM_SERIALIZE));
+
+	/**
+	 * NMSettingBond:downdelay:
+	 *
+	 * Specifies the time, in milliseconds, to wait before disabling
+	 * a slave after a link failure has been detected.  This option
+	 * is only valid for the miimon link monitor.  The downdelay
+	 * value should be a multiple of the miimon value; if not, it
+	 * will be rounded down to the nearest multiple.  The default
+	 * value is 0.
+	 **/
+	g_object_class_install_property
+		(object_class, PROP_DOWNDELAY,
+		 g_param_spec_uint (NM_SETTING_BOND_DOWNDELAY,
+						"DownDelay",
+						"Specifies the time, in milliseconds, to wait before disabling "
+						"a slave after a link failure has been detected.  This option "
+						"is only valid for the miimon link monitor.  The downdelay "
+						"value should be a multiple of the miimon value; if not, it "
+						"will be rounded down to the nearest multiple.  The default "
+						"value is 0.",
+						0, G_MAXUINT32, 0,
+						G_PARAM_READWRITE | G_PARAM_CONSTRUCT | NM_SETTING_PARAM_SERIALIZE));
+
+	/**
+	 * NMSettingBond:updelay:
+	 *
+	 * Specifies the time, in milliseconds, to wait before enabling a
+	 * slave after a link recovery has been detected.  This option is
+	 * only valid for the miimon link monitor.  The updelay value
+	 * should be a multiple of the miimon value; if not, it will be
+	 * rounded down to the nearest multiple.  The default value is 0.
+	 **/
+	g_object_class_install_property
+		(object_class, PROP_UPDELAY,
+		 g_param_spec_uint (NM_SETTING_BOND_UPDELAY,
+						"UpDelay",
+						"Specifies the time, in milliseconds, to wait before enabling a "
+						"slave after a link recovery has been detected.  This option is "
+						"only valid for the miimon link monitor.  The updelay value "
+						"should be a multiple of the miimon value; if not, it will be "
+						"rounded down to the nearest multiple.  The default value is 0.",
+						0, G_MAXUINT32, 0,
+						G_PARAM_READWRITE | G_PARAM_CONSTRUCT | NM_SETTING_PARAM_SERIALIZE));
+
+	/**
+	 * NMSettingBond:arp_interval:
+	 *
+	 * Specifies the ARP link monitoring frequency in milliseconds.
+	 *
+	 * The ARP monitor works by periodically checking the slave
+	 * devices to determine whether they have sent or received
+	 * traffic recently (the precise criteria depends upon the
+	 * bonding mode, and the state of the slave).  Regular traffic is
+	 * generated via ARP probes issued for the addresses specified by
+	 * the arp-ip-target option.
+	 *
+	 * This behavior can be modified by the arp-validate option.
+	 *
+	 * If ARP monitoring is used in an etherchannel compatible mode
+	 * (modes 0 and 2), the switch should be configured in a mode
+	 * that evenly distributes packets across all links. If the
+	 * switch is configured to distribute the packets in an XOR
+	 * fashion, all replies from the ARP targets will be received on
+	 * the same link which could cause the other team members to
+	 * fail.  ARP monitoring should not be used in conjunction with
+	 * miimon.  A value of 0 disables ARP monitoring.  The default
+	 * value is 0.
+	 **/
+	g_object_class_install_property
+		(object_class, PROP_ARP_INTERVAL,
+		 g_param_spec_uint (NM_SETTING_BOND_ARP_INTERVAL,
+						"ArpInterval",
+						"Specifies the ARP link monitoring frequency in milliseconds. "
+						"The ARP monitor works by periodically checking the slave "
+						"devices to determine whether they have sent or received "
+						"traffic recently (the precise criteria depends upon the "
+						"bonding mode, and the state of the slave).  Regular traffic is "
+						"generated via ARP probes issued for the addresses specified by "
+						"the arp-ip-target option. "
+						"This behavior can be modified by the arp-validate option. "
+						"If ARP monitoring is used in an etherchannel compatible mode "
+						"(modes 0 and 2), the switch should be configured in a mode "
+						"that evenly distributes packets across all links. If the "
+						"switch is configured to distribute the packets in an XOR "
+						"fashion, all replies from the ARP targets will be received on "
+						"the same link which could cause the other team members to "
+						"fail.  ARP monitoring should not be used in conjunction with "
+						"miimon.  A value of 0 disables ARP monitoring.  The default "
+						"value is 0.",
+						0, G_MAXUINT32, 0,
+						G_PARAM_READWRITE | G_PARAM_CONSTRUCT | NM_SETTING_PARAM_SERIALIZE));
+
+	/**
+	 * NMSettingBond:arp_ip_target:
+	 *
+	 * Specifies the IP addresses to use as ARP monitoring peers when
+	 * arp_interval is > 0.  These are the targets of the ARP request
+	 * sent to determine the health of the link to the targets.
+	 * Specify these values in ddd.ddd.ddd.ddd format.  Multiple IP
+	 * addresses must be separated by a comma.  At least one IP
+	 * address must be given for ARP monitoring to function.  The
+	 * maximum number of targets that can be specified is 16.  The
+	 * default value is no IP addresses.
+	 **/
+	g_object_class_install_property
+		(object_class, PROP_ARP_IP_TARGET,
+		 g_param_spec_string (NM_SETTING_BOND_ARP_IP_TARGET,
+						  "ArpIpTarget",
+						  "Specifies the IP addresses to use as ARP monitoring peers when "
+						  "arp-interval is > 0.  These are the targets of the ARP request "
+						  "sent to determine the health of the link to the targets. "
+						  "Specify these values in ddd.ddd.ddd.ddd format.  Multiple IP "
+						  "addresses must be separated by a comma.  At least one IP "
+						  "address must be given for ARP monitoring to function.  The "
+						  "maximum number of targets that can be specified is 16.  The "
+						  "default value is no IP addresses.",
+						  NULL,
+						  G_PARAM_READWRITE | NM_SETTING_PARAM_SERIALIZE));
+}
diff --git a/libnm-util/nm-setting-bond.h b/libnm-util/nm-setting-bond.h
new file mode 100644
index 0000000..3985731
--- /dev/null
+++ b/libnm-util/nm-setting-bond.h
@@ -0,0 +1,94 @@
+/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */
+
+/*
+ * Thomas Graf <tgraf redhat com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301 USA.
+ *
+ * (C) Copyright 2011 Red Hat, Inc.
+ */
+
+#ifndef NM_SETTING_BOND_H
+#define NM_SETTING_BOND_H
+
+#include <nm-setting.h>
+
+G_BEGIN_DECLS
+
+#define NM_TYPE_SETTING_BOND            (nm_setting_bond_get_type ())
+#define NM_SETTING_BOND(obj)            (G_TYPE_CHECK_INSTANCE_CAST ((obj), NM_TYPE_SETTING_BOND, NMSettingBond))
+#define NM_SETTING_BOND_CLASS(klass)    (G_TYPE_CHECK_CLASS_CAST ((klass), NM_TYPE_SETTING_BOND, NMSettingBondClass))
+#define NM_IS_SETTING_BOND(obj)         (G_TYPE_CHECK_INSTANCE_TYPE ((obj), NM_TYPE_SETTING_BOND))
+#define NM_IS_SETTING_BOND_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE ((obj), NM_TYPE_SETTING_BOND))
+#define NM_SETTING_BOND_GET_CLASS(obj)  (G_TYPE_INSTANCE_GET_CLASS ((obj), NM_TYPE_SETTING_BOND, NMSettingBondClass))
+
+#define NM_SETTING_BOND_SETTING_NAME "bond"
+
+/**
+ * NMSettingBondError:
+ * @NM_SETTING_BOND_ERROR_UNKNOWN: unknown or unclassified error
+ * @NM_SETTING_BOND_ERROR_INVALID_PROPERTY: the property was invalid
+ * @NM_SETTING_BOND_ERROR_MISSING_PROPERTY: the property was missing and is
+ * required
+ */
+typedef enum {
+	NM_SETTING_BOND_ERROR_UNKNOWN = 0,
+	NM_SETTING_BOND_ERROR_INVALID_PROPERTY,
+	NM_SETTING_BOND_ERROR_MISSING_PROPERTY,
+} NMSettingBondError;
+
+#define NM_TYPE_SETTING_BOND_ERROR (nm_setting_bond_error_get_type ()) 
+GType nm_setting_bond_error_get_type (void);
+
+#define NM_SETTING_BOND_ERROR nm_setting_bond_error_quark ()
+GQuark nm_setting_bond_error_quark (void);
+
+#define NM_SETTING_BOND_INTERFACE_NAME "interface-name"
+#define NM_SETTING_BOND_MODE "mode"
+#define NM_SETTING_BOND_MIIMON "miimon"
+#define NM_SETTING_BOND_DOWNDELAY "down-delay"
+#define NM_SETTING_BOND_UPDELAY "up-delay"
+#define NM_SETTING_BOND_ARP_INTERVAL "arp-interval"
+#define NM_SETTING_BOND_ARP_IP_TARGET "arp-ip-target"
+
+typedef struct {
+	NMSetting parent;
+} NMSettingBond;
+
+typedef struct {
+	NMSettingClass parent;
+
+	/* Padding for future expansion */
+	void (*_reserved1) (void);
+	void (*_reserved2) (void);
+	void (*_reserved3) (void);
+	void (*_reserved4) (void);
+} NMSettingBondClass;
+
+GType nm_setting_bond_get_type (void);
+
+NMSetting *       nm_setting_bond_new                  (void);
+const char *      nm_setting_bond_get_interface_name   (NMSettingBond *setting);
+const char *      nm_setting_bond_get_mode             (NMSettingBond *setting);
+guint32           nm_setting_bond_get_miimon           (NMSettingBond *setting);
+guint32           nm_setting_bond_get_downdelay        (NMSettingBond *setting);
+guint32           nm_setting_bond_get_updelay          (NMSettingBond *setting);
+guint32           nm_setting_bond_get_arp_interval     (NMSettingBond *setting);
+const char *      nm_setting_bond_get_arp_ip_target    (NMSettingBond *setting);
+
+G_END_DECLS
+
+#endif /* NM_SETTING_BOND_H */
diff --git a/src/settings/plugins/ifcfg-rh/common.h b/src/settings/plugins/ifcfg-rh/common.h
index 74a77c4..d801be1 100644
--- a/src/settings/plugins/ifcfg-rh/common.h
+++ b/src/settings/plugins/ifcfg-rh/common.h
@@ -15,7 +15,7 @@
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  *
- * (C) Copyright 2008 - 2010 Red Hat, Inc.
+ * (C) Copyright 2008 - 2011 Red Hat, Inc.
  */
 
 #ifndef __COMMON_H__
@@ -44,6 +44,7 @@
 #define TYPE_ETHERNET "Ethernet"
 #define TYPE_WIRELESS "Wireless"
 #define TYPE_BRIDGE   "Bridge"
+#define TYPE_BOND     "Bond"
 
 #define SECRET_FLAG_AGENT "user"
 #define SECRET_FLAG_NOT_SAVED "ask"
diff --git a/src/settings/plugins/ifcfg-rh/reader.c b/src/settings/plugins/ifcfg-rh/reader.c
index 910cca3..a327e79 100644
--- a/src/settings/plugins/ifcfg-rh/reader.c
+++ b/src/settings/plugins/ifcfg-rh/reader.c
@@ -50,6 +50,7 @@
 #include <nm-setting-wired.h>
 #include <nm-setting-wireless.h>
 #include <nm-setting-8021x.h>
+#include <nm-setting-bond.h>
 #include <nm-utils.h>
 
 #include "common.h"
@@ -3339,6 +3340,150 @@ is_wireless_device (const char *iface)
 	return is_wireless;
 }
 
+static void
+handle_bond_option (NMSettingBond *s_bond,
+		    const char *key,
+		    const char *value)
+{
+	if (!g_strcmp0 (key, "mode"))
+		g_object_set (s_bond, NM_SETTING_BOND_MODE, value, NULL);
+	else if (!g_strcmp0 (key, "miimon"))
+		g_object_set (s_bond, NM_SETTING_BOND_MIIMON, strtoul(value, NULL, 0), NULL);
+	else if (!g_strcmp0 (key, "updelay"))
+		g_object_set (s_bond, NM_SETTING_BOND_UPDELAY, strtoul(value, NULL, 0), NULL);
+	else if (!g_strcmp0 (key, "downdelay"))
+		g_object_set (s_bond, NM_SETTING_BOND_DOWNDELAY, strtoul(value, NULL, 0), NULL);
+	else if (!g_strcmp0 (key, "arp_interval"))
+		g_object_set (s_bond, NM_SETTING_BOND_ARP_INTERVAL, strtoul(value, NULL, 0), NULL);
+	else if (!g_strcmp0 (key, "arp_ip_target"))
+		g_object_set (s_bond, NM_SETTING_BOND_ARP_IP_TARGET, value, NULL);
+	else
+		PLUGIN_WARN (IFCFG_PLUGIN_NAME, "    warning: invalid bonding option '%s'", key);
+}
+
+static NMSetting *
+make_bond_setting (shvarFile *ifcfg,
+                   const char *file,
+		   gboolean nm_controlled,
+		   char **unmanaged,
+		   GError **error)
+{
+	NMSettingBond *s_bond;
+	char *value;
+
+	s_bond = NM_SETTING_BOND (nm_setting_bond_new ());
+
+	value = svGetValue (ifcfg, "DEVICE", FALSE);
+	if (!value || !strlen (value)) {
+		g_set_error (error, IFCFG_PLUGIN_ERROR, 0, "mandatory DEVICE keyword missing");
+		goto error;
+	}
+
+	g_object_set (s_bond, NM_SETTING_BOND_INTERFACE_NAME, value, NULL);
+	g_free (value);
+
+	value = svGetValue (ifcfg, "BONDING_OPTS", FALSE);
+	if (value) {
+		char **items, **iter;
+
+		items = g_strsplit_set (value, " ", -1);
+		for (iter = items; iter && *iter; iter++) {
+			if (strlen (*iter)) {
+				char **keys, *key, *val;
+
+				keys = g_strsplit_set (*iter, "=", 2);
+				if (keys && *keys) {
+					key = *keys;
+					val = *(keys + 1);
+					if (val && strlen(key) && strlen(val))
+						handle_bond_option (s_bond, key, val);
+				}
+
+				g_strfreev (keys);
+			}
+		}
+		g_free (value);
+		g_strfreev (items);
+	}
+
+	return (NMSetting *) s_bond;
+
+error:
+	g_object_unref (s_bond);
+	return NULL;
+}
+
+static NMConnection *
+bond_connection_from_ifcfg (const char *file,
+			    shvarFile *ifcfg,
+			    gboolean nm_controlled,
+			    char **unmanaged,
+			    GError **error)
+{
+	NMConnection *connection = NULL;
+	NMSetting *con_setting = NULL;
+	NMSetting *bond_setting = NULL;
+	NMSetting *wired_setting = NULL;
+	NMSetting8021x *s_8021x = NULL;
+
+	g_return_val_if_fail (file != NULL, NULL);
+	g_return_val_if_fail (ifcfg != NULL, NULL);
+
+	connection = nm_connection_new ();
+	if (!connection) {
+		g_set_error (error, IFCFG_PLUGIN_ERROR, 0,
+		             "Failed to allocate new connection for %s.", file);
+		return NULL;
+	}
+
+	con_setting = make_connection_setting (file, ifcfg, NM_SETTING_BOND_SETTING_NAME, NULL);
+	if (!con_setting) {
+		g_set_error (error, IFCFG_PLUGIN_ERROR, 0,
+		             "Failed to create connection setting.");
+		g_object_unref (connection);
+		return NULL;
+	}
+	nm_connection_add_setting (connection, con_setting);
+
+	bond_setting = make_bond_setting (ifcfg, file, nm_controlled, unmanaged, error);
+	if (!bond_setting) {
+		g_object_unref (connection);
+		return NULL;
+	}
+	nm_connection_add_setting (connection, bond_setting);
+
+	wired_setting = make_wired_setting (ifcfg, file, nm_controlled, unmanaged, &s_8021x, error);
+	if (!wired_setting) {
+		g_object_unref (connection);
+		return NULL;
+	}
+	nm_connection_add_setting (connection, wired_setting);
+
+	if (s_8021x)
+		nm_connection_add_setting (connection, NM_SETTING (s_8021x));
+
+	if (!nm_connection_verify (connection, error)) {
+		g_object_unref (connection);
+		return NULL;
+	}
+
+	return connection;
+}
+
+static gboolean
+is_bond_device (const char *name, shvarFile *parsed)
+{
+	g_return_val_if_fail (name != NULL, FALSE);
+	g_return_val_if_fail (parsed != NULL, FALSE);
+
+	if (svTrueValue (parsed, "BONDING_MASTER", FALSE))
+		return TRUE;
+	
+	/* XXX: Check for "bond[\d]+"? */
+
+	return FALSE;
+}
+
 enum {
 	IGNORE_REASON_NONE = 0x00,
 	IGNORE_REASON_BRIDGE = 0x01,
@@ -3402,9 +3547,6 @@ connection_from_file (const char *filename,
 	if (!type) {
 		char *device;
 
-		/* If no type, if the device has wireless extensions, it's wifi,
-		 * otherwise it's ethernet.
-		 */
 		device = svGetValue (parsed, "DEVICE", FALSE);
 		if (!device) {
 			g_set_error (&error, IFCFG_PLUGIN_ERROR, 0,
@@ -3422,8 +3564,10 @@ connection_from_file (const char *filename,
 		}
 
 		if (!test_type) {
+			if (is_bond_device (device, parsed))
+				type = g_strdup (TYPE_BOND);
 			/* Test wireless extensions */
-			if (is_wireless_device (device))
+			else if (is_wireless_device (device))
 				type = g_strdup (TYPE_WIRELESS);
 			else
 				type = g_strdup (TYPE_ETHERNET);
@@ -3456,6 +3600,13 @@ connection_from_file (const char *filename,
 		g_free (lower);
 	}
 
+	if (svTrueValue (parsed, "BONDING_MASTER", FALSE) &&
+	    strcasecmp (type, TYPE_BOND)) {
+		g_set_error (&error, IFCFG_PLUGIN_ERROR, 0,
+			     "BONDING_MASTER=yes key only allowed in TYPE=bond connections");
+		goto done;
+	}
+
 	/* Ignore BRIDGE= and VLAN= connections for now too (rh #619863) */
 	tmp = svGetValue (parsed, "BRIDGE", FALSE);
 	if (tmp) {
@@ -3481,7 +3632,9 @@ connection_from_file (const char *filename,
 	else if (!strcasecmp (type, TYPE_BRIDGE)) {
 		g_set_error (&error, IFCFG_PLUGIN_ERROR, 0,
 		             "Bridge connections are not yet supported");
-	} else {
+	} else if (!strcasecmp (type, TYPE_BOND))
+		connection = bond_connection_from_ifcfg (filename, parsed, nm_controlled, unmanaged, &error);
+	else {
 		g_set_error (&error, IFCFG_PLUGIN_ERROR, 0,
 		             "Unknown connection type '%s'", type);
 	}
-- 
1.7.6.4



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]