Re: ralink with networkmanager

[Dan Williams <dcbw redhat com>]

On Tue, 2009-10-27 at 18:33 +0100, bouleetbil wrote:
> Hi,
> I try to use networkmanager with a ralink card but that don't work I don't see the wifi network. (For information that works with wicd)
> 
> My config :
> kernel 2.6.31
> Networkmanager 0.7.1.997
> Networkmanager-applet 0.7.1
> 
> The logs :
> Networkmanager:
>  /usr/sbin/NetworkManager --no-daemon
> NetworkManager: <info>  starting...
> SIOCADDRT: Le fichier existe
> NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
> NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_20_01_af_b9
> NetworkManager: <info>  (ra0): driver does not support SSID scans (scan_capa 0x00).
> NetworkManager: <info>  (ra0): new 802.11 WiFi device (driver: 'rt2860')
> NetworkManager: <info>  (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781
> NetworkManager: <info>  Trying to start the supplicant...
> NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
> NetworkManager: <info>  (eth0): preparing device.
> NetworkManager: <info>  (eth0): deactivating device (reason: 2).
> -- Error received: Numerical result out of range
> -- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1256559306 pid=4199009
> NetworkManager: <WARN>  check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess
> NetworkManager: <info>  (ra0): device state change: 1 -> 2 (reason 2)
> NetworkManager: <info>  (ra0): preparing device.
> NetworkManager: <info>  (ra0): deactivating device (reason: 2).
> NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed

This looks like wpa_supplicant isn't in the expected state.  What's the
output of the following command when run as root?

dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0

Dan

> 
> dmesg :
> RX DESC f66ec000  size = 2048
> <-- RTMPAllocTxRxRingMemory, Status=0
> --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
> 1. Phy Mode = 0
> 2. Phy Mode = 0
> 3. Phy Mode = 0
> RTMPSetPhyMode: channel is out of range, use first channel=1 
> MCS Set = 00 00 00 00 00
> <==== RTMPInitialize, Status=0
> 0x1300 = 00073200
> ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 683
> ra0: no IPv6 routers present
> 
> lspci :
> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
> 02:00.0 Network controller: RaLink RT2860
> 
> lsmod :
> rt2860sta             437984  1 
> 
> 
> If someone have an idea ;)
> 
> bye