Re: Where and how to install D02HW in ConnectionManager?

[Dan Williams <dcbw redhat com>]

On Mon, 2009-02-09 at 12:09 +0900, Jacobs Shannon wrote:
> Date: Fri, 06 Feb 2009 12:03:11 -0500
> <snip>
> > Could you grab the bits of /var/log/messages or
> > /var/log/daemon.log that
> > show a connection attempt by NM when you choose the modem in
> > the menu?
> > 
> > Dan
> 
> Sorry about my slow responses, and this is mostly a thank-you for
> pointing me in the right direction. Unfortunately, this is a
> part-time and low-priority project for me. I hope I'm gradually
> moving onto the proper track, after the original detour into reams
> of debugging information. I suspected the problem was much closer to
> home. I can send large snippets, but I'm fairly sure the key bit
> appears in the daemon.log as:
> 
> Feb  9 10:10:42 X30-804 nm-system-settings:    SCPlugin-Ifupdown:
> device added (udi:
> /org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0,
> iface: (null)): iface not found
> Feb  9 10:10:42 X30-804 NetworkManager: <info>  ttyUSB0: driver is
> 'option'. 
> Feb  9 10:10:42 X30-804 NetworkManager: <debug> [1234141842.908212]
> setup_monitor_device(): No monitoring udi provided 
> Feb  9 10:10:42 X30-804 NetworkManager: <info>  Found new Modem
> device 'ttyUSB0'. 
> Feb  9 10:10:42 X30-804 NetworkManager: <info>  (ttyUSB0): exported
> as
> /org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0
> 
> Feb  9 10:10:46 X30-804 NetworkManager: <info>  (ttyUSB0): device
> state change: 1 -> 2 
> Feb  9 10:10:47 X30-804 NetworkManager: <info>  (ttyUSB0):
> deactivating device (reason: 2). 
> Feb  9 10:10:47 X30-804 NetworkManager:
> nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx
> >= 0' failed
> Feb  9 10:10:47 X30-804 NetworkManager:
> nm_system_device_flush_ip4_addresses_with_iface: assertion
> `iface_idx >= 0' failed
> Feb  9 10:10:47 X30-804 NetworkManager: <info>  (ttyUSB0): device
> state change: 2 -> 3 

Ok, this is the initial discovery of the device.  What I need is the
bits of that same log file that show when you attempt to make a
connection using the menu, which will later in the logs.

Dan