RE: My wireless card activity could not berecognizedbyNetworkManager



On Fri, 2007-02-16 at 11:25 -0800, Jihua Cheng wrote:
> Dan,
> Thanks a lot.
> 
> Please find the answer bellow.
> 
> - Do you call SET_NETDEV_DEV in your driver?
> My driver does not call SET_NETDEV_DEV.

Do this then, that is definitely required for 2.6 drivers.  It won't
break hard if you don't have it, but you need it.  It makes a link
between your hardware device and the class device in sysfs and allows
HAL to determine the parent/child relationship.

Dan

> 
> - Does it show up in /proc/net/wireless?
> Yes. "cat /proc/net/wireless" shows
> Inter-| sta-|   Quality        |   Discarded packets               |
> Missed | WE
>  face | tus | link level noise |  nwid  crypt   frag  retry   misc |
> beacon | 20
>   eth1: 0001    0     0   160        0      0 6128224     27     86
> 0
> 
> - What is the contents of /sys/class/net/ethX ? (where ethX should be
> replaced with the interface name of the wireless device that is created
> when you load your driver)
> "ls /sys/class/net/eth1" shows
> address
> addr_len
> broadcast
> carrier
> dormant
> features
> flags
> ifindex
> iflink
> link_mode
> mtu
> operstate
> statistics
> subsystem
> tx_queue_len
> type
> uevent
> weight
> wireles
> 
> 
> - What is the contents of /sys/class/net/ethX/wireless? (same as above,
> replace ethX as appropriate)
> "ls /sys/class/net/eth1/wireless " shows
> beacon
> crypt
> fragment
> level
> link
> misc
> noise
> nwid
> retries
> status
> 
> - Do you implement the get_wireless_stats function in your
> iw_handler_def structure?  That's what actually allows the system to
> create the /sys/class/net/ethX/wireless directory for you.
> get_wireless_stats is implemented.
> 
> Regards,
> 
> Charles
> 
> 
> -----Original Message-----
> From: Dan Williams [mailto:dcbw redhat com] 
> Sent: Friday, February 16, 2007 10:47 AM
> To: Jihua Cheng
> Cc: networkmanager-list gnome org
> Subject: RE: My wireless card activity could not
> berecognizedbyNetworkManager
> 
> On Fri, 2007-02-16 at 10:26 -0800, Jihua Cheng wrote:
> /> Dan,
> > Thanks a lot!
> > 
> > The card model is SD wireless card, attached into PCI card. PCI card
> > provides the bridge.
> > 
> > I wrote this driver. I can insmod my driver and it works well with
> > wireless tools(iwconfig, iwlist, etc) and network command ( for
> example,
> > ping). I could find my driver loaded properly, by using lsmod.
> > 
> > You mentioned "HAL doesn't appear to know about any wireless
> > interfaces". How can I make HAL know my wireless interface? Some
> system
> > function call?
> 
> Make sure it does the right thing with sysfs.
> 
> - Do you call SET_NETDEV_DEV in your driver?
> 
> - Does it show up in /proc/net/wireless?
> 
> - What is the contents of /sys/class/net/ethX ? (where ethX should be
> replaced with the interface name of the wireless device that is created
> when you load your driver)
> 
> - What is the contents of /sys/class/net/ethX/wireless? (same as above,
> replace ethX as appropriate)
> 
> - Do you implement the get_wireless_stats function in your
> iw_handler_def structure?  That's what actually allows the system to
> create the /sys/class/net/ethX/wireless directory for you.
> 
> Dan
> 
> 




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]