Hello everybody! I'm trying to connect to an unencrypted network using NetworkManager (through nm-applet on icewm), but it fails. Running "NetworkManager --no-daemon" I get the following stuff NetworkManager: <information> starting... NetworkManager: <information> ra0: Device is fully-supported using driver 'rt2500'. NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start NetworkManager: <information> nm_device_init(): device's worker thread started, continuing. NetworkManager: <information> Now managing wireless (802.11) device 'ra0'. NetworkManager: <information> Deactivating device ra0. NetworkManager: <information> eth0: Device is fully-supported using driver '3c59x'. NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start NetworkManager: <information> nm_device_init(): device's worker thread started, continuing. NetworkManager: <information> Now managing wired Ethernet (802.3) device 'eth0'. NetworkManager: <information> Deactivating device eth0 when starting nm-applet ... NetworkManager: <information> Updating allowed wireless network lists. NetworkManager: <WARNING> nm_dbus_get_networks_cb (): nm-dbus-nmi.c:522 (nm_dbus_get_networks_cb): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. NetworkManager: <debug info> [1146672296.452834] nm_device_802_11_wireless_get_activation_ap (): Forcing AP 'larts' There is an "unconnected"-symbol shown. Clicking the applet a network list pops up an I can see my network. When connecting manually the following messages appear: NetworkManager: <information> User Switch: /org/freedesktop/NetworkManager/Devices/ra0 / larts NetworkManager: <information> Deactivating device ra0. NetworkManager: <information> Device ra0 activation scheduled... NetworkManager: <information> Activation (ra0) started... NetworkManager: <information> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <information> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <information> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <information> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <information> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <information> Activation (ra0/wireless): access point 'larts' is unencrypted, no key needed. NetworkManager: <information> SUP: sending command 'INTERFACE_ADD ra0 wext /var/run/wpa_supplicant ' ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 5 value 0x1 - NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'AP_SCAN 1' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'ADD_NETWORK' NetworkManager: <information> SUP: response was '0' NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 6c61727473' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0' NetworkManager: <information> SUP: response was 'OK' ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 6 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 5 value 0x0 - ioctl[SIOCSIWGENIE]: Operation not supported ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 0 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 1 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 2 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 3 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 10 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 8 value 0x1 - NetworkManager: <information> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <information> wpa_supplicant(7940): Global control interface '/var/run/wpa_supplicant-global' NetworkManager: <information> wpa_supplicant(7940): RX global ctrl_iface - hexdump_ascii(len=48): NetworkManager: <information> wpa_supplicant(7940): 49 4e 54 45 52 46 41 43 45 5f 41 44 44 20 72 61 INTERFACE_ADD ra NetworkManager: <information> wpa_supplicant(7940): 30 09 09 77 65 78 74 09 2f 76 61 72 2f 72 75 6e 0__wext_/var/run NetworkManager: <information> wpa_supplicant(7940): 2f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 09 /wpa_supplicant_ NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE GLOBAL INTERFACE_ADD 'ra0 wext /var/run/wpa_supplicant ' NetworkManager: <information> wpa_supplicant(7940): Initializing interface 'ra0' conf 'N/A' driver 'wext' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A' NetworkManager: <information> wpa_supplicant(7940): Initializing interface (2) 'ra0' NetworkManager: <information> wpa_supplicant(7940): EAPOL: SUPP_PAE entering state DISCONNECTED NetworkManager: <information> wpa_supplicant(7940): EAPOL: KEY_RX entering state NO_KEY_RECEIVE NetworkManager: <information> wpa_supplicant(7940): EAPOL: SUPP_BE entering state INITIALIZE NetworkManager: <information> wpa_supplicant(7940): EAP: EAP entering state DISABLED NetworkManager: <information> wpa_supplicant(7940): EAPOL: External notification - portEnabled=0 NetworkManager: <information> wpa_supplicant(7940): EAPOL: External notification - portValid=0 NetworkManager: <information> wpa_supplicant(7940): SIOCGIWRANGE: WE(compiled)=19 WE(source)=14 enc_capa=0x0 NetworkManager: <information> wpa_supplicant(7940): capabilities: key_mgmt 0x0 enc 0x3 NetworkManager: <information> wpa_supplicant(7940): WEXT: Operstate: linkmode=1, operstate=5 NetworkManager: <information> wpa_supplicant(7940): Own MAC address: 00:0e:2e:35:bb:77 NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_set_wpa NetworkManager: <information> wpa_supplicant(7940): Driver does not support WPA. NetworkManager: <information> wpa_supplicant(7940): key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 NetworkManager: <information> wpa_supplicant(7940): Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 NetworkManager: <information> wpa_supplicant(7940): Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 NetworkManager: <information> wpa_supplicant(7940): Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 NetworkManager: <information> wpa_supplicant(7940): Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_set_countermeasures NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_set_drop_unencrypted NetworkManager: <information> wpa_supplicant(7940): Setting scan request: 0 sec 100000 usec NetworkManager: <information> wpa_supplicant(7940): Added interface ra0 NetworkManager: <information> wpa_supplicant(7940): RX ctrl_iface - hexdump_ascii(len=9): NetworkManager: <information> wpa_supplicant(7940): 41 50 5f 53 43 41 4e 20 31 AP_SCAN 1 NetworkManager: <information> wpa_supplicant(7940): RX ctrl_iface - hexdump_ascii(len=11): NetworkManager: <information> wpa_supplicant(7940): 41 44 44 5f 4e 45 54 57 4f 52 4b ADD_NETWORK NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE: ADD_NETWORK NetworkManager: <information> wpa_supplicant(7940): RX ctrl_iface - hexdump_ascii(len=29): [REMOVED] NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE: SET_NETWORK id=0 name='ssid' NetworkManager: <information> wpa_supplicant(7940): OVED] NetworkManager: <information> wpa_supplicant(7940): ssid - hexdump_ascii(len=5): NetworkManager: <information> wpa_supplicant(7940): 6c 61 72 74 73 larts NetworkManager: <information> wpa_supplicant(7940): RX ctrl_iface - hexdump_ascii(len=27): [REMOVED] NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE: SET_NETWORK id=0 name='key_mgmt' NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE: value - hexdump_ascii(len=4): [REMOVED] NetworkManager: <information> wpa_supplicant(7940): key_mgmt: 0x4 NetworkManager: <information> wpa_supplicant(7940): RX ctrl_iface - hexdump_ascii(len=16): NetworkManager: <information> wpa_supplicant(7940): 45 4e 41 42 4c 45 5f 4e 45 54 57 4f 52 4b 20 30 ENABLE_NETWORK 0 NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE: ENABLE_NETWORK id=0 NetworkManager: <information> wpa_supplicant(7940): Setting scan request: 0 sec 0 usec NetworkManager: <information> wpa_supplicant(7940): State: DISCONNECTED -> SCANNING NetworkManager: <information> wpa_supplicant(7940): Starting AP scan (broadcast SSID) NetworkManager: <information> wpa_supplicant(7940): Trying to get current scan results first without requesting a new scan to speed up initial association NetworkManager: <information> wpa_supplicant(7940): Received 139 bytes of scan results (2 BSSes) NetworkManager: <information> wpa_supplicant(7940): Scan results: 2 NetworkManager: <information> wpa_supplicant(7940): Selecting BSS from priority group 0 NetworkManager: <information> wpa_supplicant(7940): 0: 00:11:95:7f:e1:65 ssid='larts' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 NetworkManager: <information> wpa_supplicant(7940): skip - no WPA/RSN IE NetworkManager: <information> wpa_supplicant(7940): 1: 00:02:2d:1b:8d:3a ssid='newcon' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 NetworkManager: <information> wpa_supplicant(7940): skip - no WPA/RSN IE NetworkManager: <information> wpa_supplicant(7940): selected non-WPA AP 00:11:95:7f:e1:65 ssid='larts' NetworkManager: <information> wpa_supplicant(7940): Trying to associate with 00:11:95:7f:e1:65 (SSID='larts' freq=0 MHz) NetworkManager: <information> wpa_supplicant(7940): ncelling scan request NetworkManager: <information> wpa_supplicant(7940): WPA: clearing own WPA/RSN IE NetworkManager: <information> wpa_supplicant(7940): Automatic auth_alg selection: 0x1 NetworkManager: <information> wpa_supplicant(7940): WPA: clearing AP WPA IE NetworkManager: <information> wpa_supplicant(7940): WPA: clearing AP RSN IE NetworkManager: <information> wpa_supplicant(7940): WPA: clearing own WPA/RSN IE NetworkManager: <information> wpa_supplicant(7940): No keys have been configured - skip key clearing NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_set_drop_unencrypted NetworkManager: <information> wpa_supplicant(7940): State: SCANNING -> ASSOCIATING NetworkManager: <information> wpa_supplicant(7940): WEXT: Operstate: linkmode=-1, operstate=5 NetworkManager: <information> wpa_supplicant(7940): wpa_driver_wext_associate NetworkManager: <information> wpa_supplicant(7940): WEXT: Driver did not support SIOCSIWAUTH for AUTH_ALG, trying SIOCSIWENCODE NetworkManager: <information> wpa_supplicant(7940): Association request to the driver failed NetworkManager: <information> wpa_supplicant(7940): Setting authentication timeout: 5 sec 0 usec NetworkManager: <information> wpa_supplicant(7940): EAPOL: External notification - portControl=ForceAuthorized NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE monitor attached - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 37 38 37 37 2d 31 00 NetworkManager: <information> wpa_supplicant(7940): Authentication with 00:00:00:00:00:00 timed out. NetworkManager: <information> wpa_supplicant(7940): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 37 38 37 37 2d 31 00 NetworkManager: <information> wpa_supplicant(7940): Added BSSID 00:00:00:00:00:00 into blacklist ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 6 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 5 value 0x0 - ioctl[SIOCSIWGENIE]: Operation not supported ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 0 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 1 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 2 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 3 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 10 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 8 value 0x1 - NetworkManager: <information> wpa_supplicant(7940): TED ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 6 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 5 value 0x0 - ioctl[SIOCSIWGENIE]: Operation not supported ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 0 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 1 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 2 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 3 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 10 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 8 value 0x1 - NetworkManager: <information> Activation (ra0/wireless): association took too long (>20s), failing activation. NetworkManager: <information> Activation (ra0) failure scheduled... NetworkManager: <information> Activation (ra0) failed for access point (larts) NetworkManager: <information> Activation (ra0) failed. NetworkManager: <information> Deactivating device ra0. sendmsg(CTRL_IFACE monitor): No such file or directory ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 7 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - wpa_cli gives the following output [snip] Interactive mode > <2>Authentication with 00:00:00:00:00:00 timed out. <2>Trying to associate with 00:11:95:7f:e1:65 (SSID='larts' freq=0 MHz) <2>Association request to the driver failed <2>Authentication with 00:00:00:00:00:00 timed out. <2>Trying to associate with 00:11:95:7f:e1:65 (SSID='larts' freq=0 MHz) <2>Association request to the driver failed <2>CTRL-EVENT-TERMINATING - signal 15 received 'PING' command timed out. Connection to wpa_supplicant lost - trying to reconnect [/snip] Obviously the frequency printed by wpa_cli is wrong. But why does it use wpa_supplicant at all? My network is unencrypted... Btw... running "dhclient ra0" manually works fine. Thanks for your attention, Ciao, Olaf
Attachment:
pgpQXldd8yWSy.pgp
Description: PGP signature