On Nov 9, 2021, at 8:56 AM, Holger Rodriguez < gtk roseng ch> wrote:
Hi all,
I have:
macOS 10.13.6 (High
Sierra)
======================================================
----------------
I created a *new* user
gtk
as instructed and removed
the
/usr/local/bin
from the PATH, as in this directory,
homebrew has its tools.
So I ensured, that, as advised in:
https://wiki.gnome.org/Projects/GTK/OSX/Building
that no homebrew
references exist.
----------------
I downloaded the
script:
https://gitlab.gnome.org/GNOME/gtk-osx/-/blob/master/gtk-osx-setup.sh
and ran it:
wsmac01:~ gtk$
./gtk-osx-setup.sh
---------------- - OUTPUT
Cloning into
'/Users/gtk/Source/pyenv'...
remote: Enumerating
objects: 20631, done.
remote: Counting objects:
100% (1654/1654), done.
remote: Compressing
objects: 100% (641/641), done.
remote: Total 20631
(delta 991), reused 1467 (delta 883), pack-reused 18977
Receiving objects: 100%
(20631/20631), 4.20 MiB | 6.85 MiB/s, done.
Resolving deltas: 100%
(13869/13869), done.
python-build: use
openssl@1.1 from homebrew
python-build: use
readline from homebrew
Downloading
Python-3.10.0.tar.xz...
->
https://www.python.org/ftp/python/3.10.0/Python-3.10.0.tar.xz
Installing
Python-3.10.0...
patching file aclocal.m4
patching file configure
Hunk #5 succeeded at
10537 (offset -15 lines).
python-build: use
readline from homebrew
Installed Python-3.10.0
to /Users/gtk/.new_local/share/pyenv/versions/3.10.0
Requirement already
satisfied: pip in
./.new_local/share/pyenv/versions/3.10.0/lib/python3.10/site-packages
(21.2.3)
Collecting pip
Downloading
pip-21.3.1-py3-none-any.whl (1.7 MB)
|████████████████████████████████| 1.7 MB 2.5 MB/s
Installing collected
packages: pip
WARNING: The scripts
pip, pip3 and pip3.10 are installed in '/Users/gtk/.new_local/bin' which
is not on PATH.
Consider adding this
directory to PATH or, if you prefer to suppress this warning, use
--no-warn-script-location.
Successfully installed
pip-21.3.1
WARNING: You are using
pip version 21.2.3; however, version 21.3.1 is available.
You should consider
upgrading via the
'/Users/gtk/.new_local/share/pyenv/versions/3.10.0/bin/python3.10 -m pip
install --upgrade pip' command.
Collecting
pipenv==2020.11.15
Downloading
pipenv-2020.11.15-py2.py3-none-any.whl (3.9 MB)
|████████████████████████████████| 3.9 MB 2.6 MB/s
Collecting certifi
Downloading
certifi-2021.10.8-py2.py3-none-any.whl (149 kB)
|████████████████████████████████| 149 kB 9.1 MB/s
Collecting
virtualenv-clone>=0.2.5
Downloading
virtualenv_clone-0.5.7-py3-none-any.whl (6.6 kB)
Collecting virtualenv
Downloading
virtualenv-20.10.0-py2.py3-none-any.whl (5.6 MB)
|████████████████████████████████| 5.6 MB 8.0 MB/s
Requirement already
satisfied: pip>=18.0 in ./.new_local/lib/python3.10/site-packages
(from pipenv==2020.11.15) (21.3.1)
Requirement already
satisfied: setuptools>=36.2.1 in
./.new_local/share/pyenv/versions/3.10.0/lib/python3.10/site-packages
(from pipenv==2020.11.15) (57.4.0)
Collecting
backports.entry-points-selectable>=1.0.4
Downloading
backports.entry_points_selectable-1.1.1-py2.py3-none-any.whl (6.2 kB)
Collecting
six<2,>=1.9.0
Downloading
six-1.16.0-py2.py3-none-any.whl (11 kB)
Collecting
platformdirs<3,>=2
Downloading
platformdirs-2.4.0-py3-none-any.whl (14 kB)
Collecting
distlib<1,>=0.3.1
Downloading
distlib-0.3.3-py2.py3-none-any.whl (496 kB)
|████████████████████████████████| 496 kB 7.6 MB/s
Collecting
filelock<4,>=3.2
Downloading
filelock-3.3.2-py3-none-any.whl (9.7 kB)
Installing collected
packages: six, platformdirs, filelock, distlib,
backports.entry-points-selectable, virtualenv-clone, virtualenv,
certifi, pipenv
WARNING: The script
virtualenv-clone is installed in '/Users/gtk/.new_local/bin' which is
not on PATH.
Consider adding this
directory to PATH or, if you prefer to suppress this warning, use
--no-warn-script-location.
WARNING: The script
virtualenv is installed in '/Users/gtk/.new_local/bin' which is not on
PATH.
Consider adding this
directory to PATH or, if you prefer to suppress this warning, use
--no-warn-script-location.
WARNING: The scripts
pipenv and pipenv-resolver are installed in '/Users/gtk/.new_local/bin'
which is not on PATH.
Consider adding this
directory to PATH or, if you prefer to suppress this warning, use
--no-warn-script-location.
Successfully installed
backports.entry-points-selectable-1.1.1 certifi-2021.10.8 distlib-0.3.3
filelock-3.3.2 pipenv-2020.11.15 platformdirs-2.4.0 six-1.16.0
virtualenv-20.10.0 virtualenv-clone-0.5.7
WARNING: Package(s) not
found: typing
Cloning into
'/Users/gtk/Source/jhbuild'...
fatal: unable to access
'https://gitlab.gnome.org/GNOME/jhbuild.git/': SSL certificate problem:
certificate has expired
./gtk-osx-setup.sh: line
114: cd: /Users/gtk/Source/jhbuild: No such file or directory
Archive:
/Users/gtk/.new_local/ninja-mac.zip
inflating:
/Users/gtk/.new_local/bin/ninja
info: downloading
installer
info: profile set to
'minimal'
info: default host triple
is x86_64-apple-darwin
info: syncing channel
updates for 'stable-x86_64-apple-darwin'
info: latest update on
2021-11-01, rust version 1.56.1 (59eed8a2a 2021-11-01)
info: downloading
component 'cargo'
info: downloading
component 'rust-std'
22.0 MiB / 22.0 MiB
(100 %) 6.9 MiB/s in 3s ETA: 0s
info: downloading
component 'rustc'
62.2 MiB / 62.2 MiB
(100 %) 7.0 MiB/s in 9s ETA: 0s
info: installing
component 'cargo'
info: installing
component 'rust-std'
22.0 MiB / 22.0 MiB
(100 %) 12.3 MiB/s in 2s ETA: 0s
info: installing
component 'rustc'
62.2 MiB / 62.2 MiB
(100 %) 13.7 MiB/s in 4s ETA: 0s
info: default toolchain
set to 'stable-x86_64-apple-darwin'
stable-x86_64-apple-darwin installed - rustc 1.56.1 (59eed8a2a
2021-11-01)
Rust is installed now.
Great!
To get started you need
Cargo's bin directory (/Users/gtk/.new_local/bin) in
your PATH
environment variable.
This has not been done automatically.
To configure your current
shell, run:
source
/Users/gtk/.new_local/env
PATH does not contain
/Users/gtk/.new_local/bin. You probably want to fix that.
./gtk-osx-setup.sh: line
234: test: -eq: unary operator expected
Warning: the environment
variable LANG is not set!
We recommend setting this
in ~/.profile (or equivalent) for proper expected behavior.
Creating a virtualenv for
this project...
Pipfile:
/Users/gtk/.new_local/etc/Pipfile
Using
/Users/gtk/.new_local/share/pyenv/versions/3.10.0/bin/python3 (3.10.0)
to create virtualenv...
⠼ Creating virtual
environment...created virtual environment CPython3.10.0.final.0-64 in
1794ms
creator
CPython3Posix(dest=/Users/gtk/.local/share/virtualenvs/etc-UNI9p0cK,
clear=False, no_vcs_ignore=False, global=False)
seeder
FromAppData(download=False, pip=bundle, setuptools=bundle, wheel=bundle,
via=copy, app_data_dir=/Users/gtk/Library/Application
Support/virtualenv)
added seed packages:
pip==21.3.1, setuptools==58.3.0, wheel==0.37.0
activators
BashActivator,CShellActivator,FishActivator,NushellActivator,PowerShellActivator,PythonActivator
✔ Successfully created
virtual environment!
Virtualenv location:
/Users/gtk/.local/share/virtualenvs/etc-UNI9p0cK
Pipfile.lock not found,
creating...
Locking [dev-packages]
dependencies...
Locking [packages]
dependencies...
Building requirements...
Resolving dependencies...
✔ Success!
Updated Pipfile.lock
(179575)!
Installing dependencies
from Pipfile.lock (179575)...
🐍
▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉▉ 2/2 — 00:00:02
To activate this
project's virtualenv, run pipenv shell.
Alternatively, run a
command inside the virtualenv with pipenv run.
Installing jhbuild
configuration at /Users/gtk/.config/jhbuildrc
Installing jhbuild custom
configuration at /Users/gtk/.config/jhbuildrc-custom
----------------
ADDING .new_local/bin as instructed
wsmac01:~
gtk$ export PATH=/Users/gtk/.new_local/bin:$PATH
---------------- EXECUTING the next step
wsmac01:~
gtk$ jhbuild bootstrap-gtk-osx
Traceback (most recent
call last):
File
"/Users/gtk/.new_local/bin/pipenv", line 5, in <module>
from pipenv import
cli
ModuleNotFoundError: No
module named 'pipenv'
ˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆˆ
<<<<<<<<<< FAILS
======================================================
What basic thing
am I missing?
I am quite sure, that I followed the instructions given at:
https://wiki.gnome.org/Projects/GTK/OSX/Building
to the letter in the "Procedure" section.
Thanks for any help.
Does the PYTHONPATH line in .new_local/bin/jhbuild correctly point to $HOME/.new_local/lib/python3.10/site-packages? Does that directory have a subdirectory pipenv containing __init__.py and cli/ among others?
Regards, John Ralls
|
