GNOME.org
 

Re: [gtk-osx-users] Building on PPC fails

After having installed the jhbuild version of python, the next problem I ran into is when building perl-xml-simple:

perl Makefile.PL INSTALLDIRS=vendor PREFIX=/Users/steffen/gtk/inst  
ExtUtils::MakeMaker version 6.31 required--this is only version 6.30 at Makefile.PL line 7.
BEGIN failed--compilation aborted at Makefile.PL line 7.

Unfortunately I am not good at perl.  MakeMaker seems to be provided by OSX (PPC/Leopard in my case).  How would I obtain and install the required version 6.31?

I googled a bit and then executed

sudo cpan -i ExtUtils::MakeMaker


(Without sudo, perl can't install the files in /usr due to lacking permission).

To my surpise this actually worked and perl-xml-simple (and the rest of meta-gtk-osx-bootstrap) compiles and installs.

I am just wondering if I will have problems later due to my modified perl environment?

Steffen


----- Original Message -----
> From: Steffen Gutmann <muibase yahoo com>
> To: "gtk-osx-users-list gnome org" <gtk-osx-users-list gnome org>
> Cc: 
> Sent: Sunday, January 13, 2013 12:42 PM
> Subject: Re: [gtk-osx-users] Building on PPC fails
> 
> Hi John,
> 
> thanks for the hint.  I will try that as well.
> 
> It seems there is another problem when building for 10.4/10.4u.
> 
> Building libxm2l fails with the message:
> 
> ld: library not found for -lpython2.5
> 
> I guess the problem is that the 10.4u SDK only has python 2.3.  If I do a 
> 'jhbuild build python' (as described on the build web page) then it uses 
> the python lib provided by jhbuild and libxml2 compiles. But this does not seem 
> to be described properly on the build web page (where it says you only need to 
> 'jhbuild build python' when compiling on Tiger for the purpose of 
> extracting archives).  Or maybe I misunderstood that part.
> 
> Regards,
> 
> Steffen
> 
> ----- Original Message -----
>>  From: John Ralls <jralls ceridwen us>
>>  To: Steffen Gutmann <muibase yahoo com>
>>  Cc: "gtk-osx-users-list gnome org" 
> <gtk-osx-users-list gnome org>
>>  Sent: Sunday, January 13, 2013 11:38 AM
>>  Subject: Re: [gtk-osx-users] Building on PPC fails
>> 
>> 
>>  On Jan 13, 2013, at 12:04 AM, Steffen Gutmann <muibase yahoo com> 
> wrote:
>> 
>>>   I should maybe mention that I am trying a universal build 
>>  (.jhbuildrc-custom)
>>> 
>>>   setup_universal_build(target="10.4", 
>>  sdk_version="10.4u", 
>>>                           architectures=["ppc", 
> "i386"])
>>> 
>>>   Maybe that's the problem. Although, I have been able to build it 
> in the 
>>  past (after tweaking some defines in glib).
>>> 
>>>   I'll try with the following setup next:
>>> 
>>>   setup_sdk(target="10.4", sdk_version="10.4u", 
>>  architectures=["ppc"])
>> 
>>  This section of jhbuildrc-gtk-osx (which gets installed as .jhbuildrc) 
> applies:
>>      #Defining ARCHFLAGS globally messes up waf, so we need to define
>>      #it here for our two perl modules:
>>      if architectures != ['ppc']:
>>          module_extra_env.update(
>>              {"perl-xml-simple":{"ARCHFLAGS":"-arch 
> i386 
>>  -arch x86_64"},
>>               "perl-xml-parser":{"ARCHFLAGS":"-arch 
> i386 
>>  -arch x86_64"}})
>>  I wrote that not thinking about universal builds. Try changing the 
> condition to 
>>      if not "ppc" in architectures:
>> 
>>  But even better would be to construct ARCHFLAGS with something like 
> "-arch 
>>  " + "-arch ".join(architectures).
>> 
>>  That said, universal builds aren't really supported. You'll likely 
> have 
>>  to patch the universal modulesets and setup_universal() in 
> jhbuildrc-gtk-osx to 
>>  get everything working. If you succeed, please do provide your patches.
>> 
>>  Regards,
>>  John Ralls
>> 
>> 
>>>   ----- Original Message -----
>>>>   From: Steffen Gutmann <muibase yahoo com>
>>>>   To: "gtk-osx-users-list gnome org" 
>>  <gtk-osx-users-list gnome org>
>>>>   Cc: 
>>>>   Sent: Saturday, January 12, 2013 11:34 PM
>>>>   Subject: [gtk-osx-users] Building on PPC fails
>>>> 
>>>>   Hi,
>>>> 
>>>>   I am not sure if someone recently tried building gtkosx on a PPC 
>>  machine?  I run 
>>>>   into the following problem on a PPC MacMini with OSX Leopard:
>>>> 
>>>>   sh gtk-osx-build-setup.sh: succeeds
>>>>   jhbuild build python: succeeds
>>>> 
>>>>   jhbuild bootstrap: succeeds
>>>> 
>>>>   jhbuild build meta-gtk-osx-bootstrap: fails when configuring 
> intltool.  
>>  Here is 
>>>>   the trace:
>>>> 
>>>> 
>>>>   *** Configuring intltool *** [8/15]
>>>>   ./configure --prefix /Users/steffen/gtk/inst --libdir 
>>>>   '/Users/steffen/gtk/inst/lib'   
> --disable-dependency-tracking 
>>>>   configure: WARNING: unrecognized options: 
> --disable-dependency-tracking
>>>>   checking for a BSD-compatible install... 
>>  /Users/steffen/.local/bin/install-check
>>>>   checking whether build environment is sane... yes
>>>>   checking for a thread-safe mkdir -p... ./install-sh -c -d
>>>>   checking for gawk... no
>>>>   checking for mawk... no
>>>>   checking for nawk... no
>>>>   checking for awk... awk
>>>>   checking whether make sets $(MAKE)... yes
>>>>   checking for perl... /usr/bin/perl
>>>>   checking for perl >= 5.8.1... 5.8.8
>>>>   checking for XML::Parser... configure: error: XML::Parser perl 
> module 
>>  is 
>>>>   required for intltool
>>>>   *** Error during phase configure of intltool: ########## Error 
> running 
>>>>   ./configure --prefix /Users/steffen/gtk/inst --libdir 
>>>>   '/Users/steffen/gtk/inst/lib'   
> --disable-dependency-tracking  
>>  *** 
>>>>   [8/15]
>>>> 
>>>>   I looked into the ./configure script and ran the following line 
>>  manually:
>>>> 
>>>>   perl -e "require XML::Parser"
>>>> 
>>>> 
>>>>   which outputs:
>>>> 
>>>>   Can't load 
>>>> 
>> 
> '/Users/steffen/gtk/inst/lib/perl5/5.8.8/darwin-thread-multi-2level/auto/XML/Parser/Expat/Expat.bundle' 
> 
>> 
>>>>   for module XML::Parser::Expat: 
>>>> 
>> 
> dlopen(/Users/steffen/gtk/inst/lib/perl5/5.8.8/darwin-thread-multi-2level/auto/XML/Parser/Expat/Expat.bundle, 
> 
>> 
>>>>   1): no suitable image found.  Did find:
>>>> 
>> 
> /Users/steffen/gtk/inst/lib/perl5/5.8.8/darwin-thread-multi-2level/auto/XML/Parser/Expat/Expat.bundle: 
> 
>> 
>>>>   no matching architecture in universal wrapper at 
>>>>   
> /System/Library/Perl/5.8.8/darwin-thread-multi-2level/DynaLoader.pm 
>>  line 230.
>>>>    at 
>>>> 
>> 
> /Users/steffen/gtk/inst/lib/perl5/5.8.8/darwin-thread-multi-2level/XML/Parser.pm 
> 
>> 
>>>>   line 18
>>>>   Compilation failed in require at 
>>>> 
>> 
> /Users/steffen/gtk/inst/lib/perl5/5.8.8/darwin-thread-multi-2level/XML/Parser.pm 
> 
>> 
>>>>   line 18.
>>>>   BEGIN failed--compilation aborted at 
>>>> 
>> 
> /Users/steffen/gtk/inst/lib/perl5/5.8.8/darwin-thread-multi-2level/XML/Parser.pm 
> 
>> 
>>>>   line 22.
>>>>   Compilation failed in require at -e line 1.
>>>>   The problem is the file 
>>>> 
>> 
> /Users/steffen/gtk/inst/lib/perl5/5.8.8/darwin-thread-multi-2level/auto/XML/Parser/Expat/Expat.bundle
>>>> 
>>>>   which originates from 
>>>> 
>>>> 
>> 
> /Users/steffen/gtk/source/XML-Parser-2.41/blib/arch/auto/XML/Parser/Expat/Expat.bundle
>>>> 
>>>>   It does not contain any PPC code:
>>>> 
>>>>   cd 
>>  /Users/steffen/gtk/source/XML-Parser-2.41/blib/arch/auto/XML/Parser/Expat/
>>>> 
>>>>   file Expat.bundle 
>>>>   Expat.bundle: Mach-O universal binary with 2 architectures
>>>>   Expat.bundle (for architecture i386):Mach-O bundle i386
>>>>   Expat.bundle (for architecture x86_64):Mach-O 64-bit bundle x86_64
>>>> 
>>>>   In contrast, XML-Parser-2.40 has these architectures:
>>>>   cd 
>>>> 
>> 
> /Users/steffen/gtk-old-but-good/source/XML-Parser-2.40/blib/arch/auto/XML/Parser/Expat/
>>>> 
>>>>   file Expat.bundle 
>>>>   Expat.bundle: Mach-O universal binary with 2 architectures
>>>>   Expat.bundle (for architecture ppc):Mach-O bundle ppc
>>>>   Expat.bundle (for architecture i386):Mach-O bundle i386
>>>> 
>>>>   Would it be okay to go back to XML-Parser-2.40?
>>>> 
>>>>   Regards,
>>>> 
>>>>   Steffen
>>>>   _______________________________________________
>>>>   Gtk-osx-users-list mailing list
>>>>   Gtk-osx-users-list gnome org
>>>>   https://mail.gnome.org/mailman/listinfo/gtk-osx-users-list
>>>> 
>>>   _______________________________________________
>>>   Gtk-osx-users-list mailing list
>>>   Gtk-osx-users-list gnome org
>>>   https://mail.gnome.org/mailman/listinfo/gtk-osx-users-list
>> 
> _______________________________________________
> Gtk-osx-users-list mailing list
> Gtk-osx-users-list gnome org
> https://mail.gnome.org/mailman/listinfo/gtk-osx-users-list
>
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]