GNOME.org
 

Re: Run time error in gtk1.3 application

Hello all,
I was writing this message bellow when my mail-server crash yesterday,
then I attempt to run autogen.sh and my application compileted normally
& run normally, I see the Makefile and found some references to gtk-1.2,
gtk-2.0, glib-1.2, glib-2.0, I don't know what's the diferences behind
this new Makefile (made by autogen.sh) and old (compile but not run),
I suspect that my application compiled in gtk-1.2 and not in gtk-2.0,
but I don't know to say.
If anyone has a clue I thanks very much.

Thanks in advance

Flavio Alberto 

******************************************************** ORIGINAL MAIL
*****************************************************************************
I made the changes that Olaf sugests and now doesn't show "stranger"
messages in compilation, but the resulting program continues with the
same crash when I run it.
The Makefile has many references to glib-1.2 & gtk-1.2 (old) and I don't
know how to change these files, if I change 1.2 to 2.0 the errors are
this : 

gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../intl -I/usr/include
-DNEED_GNOMESUPPORT_H -I/usr/lib/gnome-libs/include
-I/usr/include/glib-2.0 -I/usr/lib/glib/include -I/usr/include/gtk-2.0
-I/usr/X11R6/include  -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
-I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2
-I/usr/include/atk-1.0  -I/usr/include/gtk-2.0
-I/usr/lib/gtk-2.0/include -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0
-I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/atk-1.0
-Wall -Wunused  -c main.c
In file included from /usr/include/libgnomeui/libgnomeui.h:19,
                from /usr/include/gnome.h:17,
                from main.c:10:
/usr/include/libgnomeui/gnome-canvas-image.h:15: gtk/gtkpacker.h:
Arquivo ou diretório não encontrado
In file included from /usr/include/libgnomeui/libgnomeui.h:24,
                from /usr/include/gnome.h:17,
                from main.c:10:
/usr/include/libgnomeui/gnome-canvas-text.h:15: gtk/gtkpacker.h: Arquivo
ou diretório não encontrado
In file included from /usr/include/libgnomeui/libgnomeui.h:26,
                from /usr/include/gnome.h:17,
                from main.c:10:
/usr/include/libgnomeui/gnome-canvas-widget.h:15: gtk/gtkpacker.h: File
not found
make: *** [main.o] Error 1

Really, the file gtkpacker.h doesn't exists inside gtk-2.0, I have to
change some thing in my program ?


I will send the glib-config & gtk-config that I edited how sugests Olaf
and the Makefile.am & Makefile that ./configure script generated;

Excuse-me for send so many files but really I don't know what to do.

Thanks for all help

Flavio Alberto





Em 04 Feb 2002 11:35:59 -0500, Havoc Pennington escreveu:
> 
> Flávio Alberto Lopes Soares <flavio maqplas com br> writes:
> > 
> > I make some modifications in my Makefile (attached in mail) in order
> > to compile my application in gtk+1.3 (gtk+2.0), in compilation I get
> > this messages (was several similar messages to each file of my
> > application, I put only piece of messages) :
> 
> Your Makefile is all screwed up somehow. Note that you're getting GTK
> 1.2 flags in there, and GNOME 1.x. You need GNOME 2 to use GTK 2.
> 
> Show us the Makefile.am, rather than the Makefile.
> 
> Havoc

#!/bin/sh

prefix=/usr
exec_prefix=${prefix}
exec_prefix_set=no

usage()
{
	cat <<EOF
Usage: glib-config [OPTIONS] [LIBRARIES]
Options:
	[--prefix[=DIR]]
	[--exec-prefix[=DIR]]
	[--version]
	[--libs]
	[--cflags]
Libraries:
	glib
	gmodule
	gthread
EOF
	exit $1
}

if test $# -eq 0; then
	usage 1 1>&2
fi

lib_glib=yes

while test $# -gt 0; do
  case "$1" in
  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) optarg= ;;
  esac

  case $1 in
    --prefix=*)
      prefix=$optarg
      if test $exec_prefix_set = no ; then
        exec_prefix=$optarg
      fi
      ;;
    --prefix)
      echo_prefix=yes
      ;;
    --exec-prefix=*)
      exec_prefix=$optarg
      exec_prefix_set=yes
      ;;
    --exec-prefix)
      echo_exec_prefix=yes
      ;;
    --version)
      echo 1.3.7
      exit 0
      ;;
    --cflags)
      echo_cflags=yes
      ;;
    --libs)
      echo_libs=yes
      ;;
    glib)
      lib_glib=yes
      ;;
    gmodule)
      lib_gmodule=yes
      ;;
    gthread)
      lib_gthread=yes
      ;;
    *)
      usage 1 1>&2
      ;;
  esac
  shift
done

if test "$echo_prefix" = "yes"; then
	echo $prefix
fi
if test "$echo_exec_prefix" = "yes"; then
	echo $exec_prefix
fi
if test "$echo_cflags" = "yes"; then
	cflags=""
	if test "$lib_gthread" = "yes"; then
		cflags="$cflags  -D_REENTRANT"
	fi
	echo -I${prefix}/include/glib-2.0 -I/usr/lib/glib/include $includes $cflags
fi
if test "$echo_libs" = "yes"; then
	libsp=""
	libsa=""
	if test "$lib_glib" = "yes"; then
		libsp="$libsp -lglib"
	fi
	if test "$lib_gthread" = "yes"; then
		libsp="-lgthread $libsp"
		libsa="$libsa -lpthread"
	fi
	if test "$lib_gmodule" = "yes"; then
		libsp="-rdynamic -lgmodule $libsp"
		libsa="$libsa -ldl"
	fi
	echo -L/usr/lib $libsp $libsa
fi

# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4a from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = /bin/sh

srcdir = .
top_srcdir = ..
prefix = /usr/local
exec_prefix = ${prefix}

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/ihm_princ
pkglibdir = $(libdir)/ihm_princ
pkgincludedir = $(includedir)/ihm_princ

top_builddir = ..

ACLOCAL = aclocal -I macros
AUTOCONF = autoconf
AUTOMAKE = automake
AUTOHEADER = autoheader

INSTALL = /usr/bin/install -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
INSTALL_STRIP_FLAG =
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i686-pc-linux
host_triplet = i686-pc-linux-gnu
BUILD_INCLUDED_LIBINTL = no
CATALOGS = 
CATOBJEXT = .gmo
CC = gcc
DATADIRNAME = share
GENCAT = gencat
GLIBC21 = yes
GMOFILES = 
GMSGFMT = /usr/bin/msgfmt
GNOMEGNORBA_LIBS = -rdynamic -lgnorba -lORBitCosNaming -lORBit -lIIOP -lORBitutil -lnsl -lgnomeui -lart_lgpl -lgdk_imlib -lSM -lICE -lgtk -lgdk -lgmodule -lXext -lX11 -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GNOMEUI_LIBS = -rdynamic -lgnomeui -lart_lgpl -lgdk_imlib -lSM -lICE -lgtk -lgdk -lgmodule -lXext -lX11 -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GNOME_APPLETS_LIBS = 
GNOME_CAPPLET_LIBS = 
GNOME_CONFIG = /usr/bin/gnome-config
GNOME_DOCKLETS_LIBS = 
GNOME_INCLUDEDIR = -I/usr/include -DNEED_GNOMESUPPORT_H -I/usr/lib/gnome-libs/include -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/include/gtk-1.2 -I/usr/X11R6/include
GNOME_LIBDIR = -rdynamic -L/usr/lib -L/usr/X11R6/lib
GNOME_LIBS = -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GNORBA_CFLAGS = -I/usr/include -DNEED_GNOMESUPPORT_H -I/usr/lib/gnome-libs/include -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/include/gtk-1.2 -I/usr/X11R6/include
GNORBA_LIBS = -rdynamic -L/usr/lib -L/usr/X11R6/lib -lgnorba -lORBitCosNaming -lORBit -lIIOP -lORBitutil -lnsl -lgnomeui -lart_lgpl -lgdk_imlib -lSM -lICE -lgtk -lgdk -lgmodule -lXext -lX11 -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GTKXMHTML_LIBS = -rdynamic -lgtkxmhtml -lXpm -ljpeg -lpng -lz -lSM -lICE -lgtk -lgdk -lgmodule -lglib -ldl -lXext -lX11 -lm
GTK_CFLAGS = -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/atk-1.0
GTK_CONFIG = /usr/bin/gtk-config
GTK_LIBS = -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk-x11-1.3 -lgdk-x11-1.3 -lXi -lgdk_pixbuf-1.3 -lm -lpangox -lpangoxft -lXft -lXrender -lXext -lX11 -lfreetype -lpango -latk -lgobject-1.3 -lgmodule-1.3 -ldl -lglib-1.3
INSTOBJEXT = .mo
INTLBISON = bison
INTLLIBS = 
INTLOBJS = 
INTL_LIBTOOL_SUFFIX_PREFIX = 
LIBICONV = 
MAKEINFO = makeinfo
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/bin/msgfmt
ORBIT_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/glib/include -I/usr/include
ORBIT_CONFIG = /usr/bin/orbit-config
ORBIT_IDL = /usr/bin/orbit-idl
ORBIT_LIBS = -L/usr/lib -lORBitCosNaming -lORBit -lIIOP -lORBitutil -lglib -lnsl -lm
PACKAGE = ihm_princ
POFILES = 
POSUB = po
PTHREAD_LIB = -lpthread
RANLIB = ranlib
USE_INCLUDED_LIBINTL = no
USE_NLS = yes
VERSION = 0.1
XPM_LIBS = -lXpm
ZVT_LIBS = -rdynamic -lzvt -lutil -lSM -lICE -lgdk_imlib -lgtk -lgdk -lgmodule -lglib -ldl -lXext -lX11 -lm
cflags_set = yes
cxxflags_set = @cxxflags_set@

INCLUDES =  	-I$(top_srcdir)/intl 	$(GNOME_INCLUDEDIR)


bin_PROGRAMS = ihm_princ

ihm_princ_SOURCES =  	main.c 	support.c support.h 	interface.c interface.h 	callbacks.c callbacks.h                                                        auxiliar.c auxiliar.h                                                          parametro.c parametro.h         


ihm_princ_LDADD = $(GNOME_LIBDIR) $(GNOMEUI_LIBS) $(INTLLIBS)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = 
PROGRAMS =  $(bin_PROGRAMS)


DEFS = -DHAVE_CONFIG_H -I. -I$(srcdir) -I..
CPPFLAGS =  -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/atk-1.0
LDFLAGS =  -L/usr/lib -L/usr/X11R6/lib -lgtk-x11-1.3 -lgdk-x11-1.3 -lXi -lgdk_pixbuf-1.3 -lm -lpangox -lpangoxft -lXft -lXrender -lXext -lX11 -lfreetype -lpango -latk -lgobject-1.3 -lgmodule-1.3 -ldl -lglib-1.3  
LIBS = 
ihm_princ_OBJECTS =  main.o support.o interface.o callbacks.o auxiliar.o \
parametro.o
ihm_princ_DEPENDENCIES = 
ihm_princ_LDFLAGS = 
CFLAGS =  -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/atk-1.0   -Wall -Wunused 
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
DIST_COMMON =  Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
DEP_FILES =  .deps/auxiliar.P .deps/callbacks.P .deps/interface.P \
.deps/main.P .deps/parametro.P .deps/support.P
SOURCES = $(ihm_princ_SOURCES)
OBJECTS = $(ihm_princ_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .o .s
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


mostlyclean-binPROGRAMS:

clean-binPROGRAMS:
	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)

distclean-binPROGRAMS:

maintainer-clean-binPROGRAMS:

install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo "  $(INSTALL_PROGRAM) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	     $(INSTALL_PROGRAM) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	list='$(bin_PROGRAMS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	done

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

ihm_princ: $(ihm_princ_OBJECTS) $(ihm_princ_DEPENDENCIES)
	@rm -f ihm_princ
	$(LINK) $(ihm_princ_LDFLAGS) $(ihm_princ_OBJECTS) $(ihm_princ_LDADD) $(LIBS)

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = src

distdir: $(DISTFILES)
	here=`cd $(top_builddir) && pwd`; \
	top_distdir=`cd $(top_distdir) && pwd`; \
	distdir=`cd $(distdir) && pwd`; \
	cd $(top_srcdir) \
	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done

DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)

-include $(DEP_FILES)

mostlyclean-depend:

clean-depend:

distclean-depend:
	-rm -rf .deps

maintainer-clean-depend:

%.o: %.c
	@echo '$(COMPILE) -c $<'; \
	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-cp .deps/$(*F).pp .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm .deps/$(*F).pp

%.lo: %.c
	@echo '$(LTCOMPILE) -c $<'; \
	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
	  < .deps/$(*F).pp > .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm -f .deps/$(*F).pp
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am: install-binPROGRAMS
install-exec: install-exec-am

install-data-am:
install-data: install-data-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-binPROGRAMS
uninstall: uninstall-am
all-am: Makefile $(PROGRAMS)
all-redirect: all-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
installdirs:
	$(mkinstalldirs)  $(DESTDIR)$(bindir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-binPROGRAMS mostlyclean-compile \
		mostlyclean-tags mostlyclean-depend mostlyclean-generic

mostlyclean: mostlyclean-am

clean-am:  clean-binPROGRAMS clean-compile clean-tags clean-depend \
		clean-generic mostlyclean-am

clean: clean-am

distclean-am:  distclean-binPROGRAMS distclean-compile distclean-tags \
		distclean-depend distclean-generic clean-am

distclean: distclean-am

maintainer-clean-am:  maintainer-clean-binPROGRAMS \
		maintainer-clean-compile maintainer-clean-tags \
		maintainer-clean-depend maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-am

.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile tags mostlyclean-tags distclean-tags \
clean-tags maintainer-clean-tags distdir mostlyclean-depend \
distclean-depend clean-depend maintainer-clean-depend info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs \
mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

## Process this file with automake to produce Makefile.in

INCLUDES = \
	-I$(top_srcdir)/intl \
	$(GNOME_INCLUDEDIR)

bin_PROGRAMS = ihm_princ

ihm_princ_SOURCES = \
	main.c \
	support.c support.h \
	interface.c interface.h \
	callbacks.c callbacks.h                                                        auxiliar.c auxiliar.h                                                          parametro.c parametro.h         

ihm_princ_LDADD = $(GNOME_LIBDIR) $(GNOMEUI_LIBS) $(INTLLIBS)


#!/bin/sh

glib_libs="-L/usr/lib -rdynamic -lgmodule -lglib -ldl"
glib_cflags="-I/usr/include/glib-2.0 -I/usr/lib/glib/include"
glib_thread_libs="-L/usr/lib -rdynamic -lgmodule -lgthread -lglib -lpthread -ldl"
glib_thread_cflags="-I/usr/include/glib-2.0 -I/usr/lib/glib/include -D_REENTRANT"

prefix=/usr
exec_prefix=/usr
exec_prefix_set=no

usage()
{
	cat <<EOF
Usage: gtk-config [OPTIONS] [LIBRARIES]
Options:
	[--prefix[=DIR]]
	[--exec-prefix[=DIR]]
	[--version]
	[--libs]
	[--cflags]
Libraries:
	gtk
	gthread
EOF
	exit $1
}

if test $# -eq 0; then
	usage 1 1>&2
fi

lib_gtk=yes

while test $# -gt 0; do
  case "$1" in
  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) optarg= ;;
  esac

  case $1 in
    --prefix=*)
      prefix=$optarg
      if test $exec_prefix_set = no ; then
        exec_prefix=$optarg
      fi
      ;;
    --prefix)
      echo_prefix=yes
      ;;
    --exec-prefix=*)
      exec_prefix=$optarg
      exec_prefix_set=yes
      ;;
    --exec-prefix)
      echo_exec_prefix=yes
      ;;
    --version)
      echo 1.3.7
      ;;
    --cflags)
      echo_cflags=yes
      ;;
    --libs)
      echo_libs=yes
      ;;
    gtk)
      lib_gtk=yes
      ;;
    gthread)
      lib_gthread=yes
      ;;
    *)
      usage 1 1>&2
      ;;
  esac
  shift
done

if test "$echo_prefix" = "yes"; then
	echo $prefix
fi

if test "$echo_exec_prefix" = "yes"; then
	echo $exec_prefix
fi

if test "$lib_gthread" = "yes"; then
      glib_cflags="$glib_thread_cflags"
      glib_libs="$glib_thread_libs"
fi

if test "$echo_cflags" = "yes"; then
#      echo -I/usr/include/gtk-1.2 $glib_cflags  -I/usr/X11R6/include 
       echo `pkg-config gtk+-2.0 --cflags`
fi

if test "$echo_libs" = "yes"; then
      my_glib_libs=
      libdirs=-L/usr/lib
      for i in $glib_libs ; do
        if test $i != -L/usr/lib ; then
          if test -z "$my_glib_libs" ; then
            my_glib_libs="$i"
          else
            my_glib_libs="$my_glib_libs $i"
          fi
        fi
      done

#    echo $libdirs   -L/usr/X11R6/lib -lgtk -lgdk $my_glib_libs  -lXext -lX11   -lm
     echo `pkg-config gtk+-2.0 --libs`

fi      


# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4a from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = /bin/sh

srcdir = .
top_srcdir = ..
prefix = /usr/local
exec_prefix = ${prefix}

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/ihm_princ
pkglibdir = $(libdir)/ihm_princ
pkgincludedir = $(includedir)/ihm_princ

top_builddir = ..

ACLOCAL = aclocal -I macros
AUTOCONF = autoconf
AUTOMAKE = automake
AUTOHEADER = autoheader

INSTALL = /usr/bin/install -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
INSTALL_STRIP_FLAG =
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i686-pc-linux
host_triplet = i686-pc-linux-gnu
BUILD_INCLUDED_LIBINTL = no
CATALOGS = 
CATOBJEXT = .gmo
CC = gcc
DATADIRNAME = share
GENCAT = gencat
GLIBC21 = yes
GMOFILES = 
GMSGFMT = /usr/bin/msgfmt
GNOMEGNORBA_LIBS = -rdynamic -lgnorba -lORBitCosNaming -lORBit -lIIOP -lORBitutil -lnsl -lgnomeui -lart_lgpl -lgdk_imlib -lSM -lICE -lgtk -lgdk -lgmodule -lXext -lX11 -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GNOMEUI_LIBS = -rdynamic -lgnomeui -lart_lgpl -lgdk_imlib -lSM -lICE -lgtk -lgdk -lgmodule -lXext -lX11 -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GNOME_APPLETS_LIBS = 
GNOME_CAPPLET_LIBS = 
GNOME_CONFIG = /usr/bin/gnome-config
GNOME_DOCKLETS_LIBS = 
GNOME_INCLUDEDIR = -I/usr/include -DNEED_GNOMESUPPORT_H -I/usr/lib/gnome-libs/include -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/include/gtk-1.2 -I/usr/X11R6/include
GNOME_LIBDIR = -rdynamic -L/usr/lib -L/usr/X11R6/lib
GNOME_LIBS = -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GNORBA_CFLAGS = -I/usr/include -DNEED_GNOMESUPPORT_H -I/usr/lib/gnome-libs/include -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/include/gtk-1.2 -I/usr/X11R6/include
GNORBA_LIBS = -rdynamic -L/usr/lib -L/usr/X11R6/lib -lgnorba -lORBitCosNaming -lORBit -lIIOP -lORBitutil -lnsl -lgnomeui -lart_lgpl -lgdk_imlib -lSM -lICE -lgtk -lgdk -lgmodule -lXext -lX11 -lgnome -lgnomesupport -lesd -laudiofile -lm -ldb1 -lglib -ldl
GTKXMHTML_LIBS = -rdynamic -lgtkxmhtml -lXpm -ljpeg -lpng -lz -lSM -lICE -lgtk -lgdk -lgmodule -lglib -ldl -lXext -lX11 -lm
GTK_CFLAGS = -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/atk-1.0
GTK_CONFIG = /usr/bin/gtk-config
GTK_LIBS = -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk-x11-1.3 -lgdk-x11-1.3 -lXi -lgdk_pixbuf-1.3 -lm -lpangox -lpangoxft -lXft -lXrender -lXext -lX11 -lfreetype -lpango -latk -lgobject-1.3 -lgmodule-1.3 -ldl -lglib-1.3
INSTOBJEXT = .mo
INTLBISON = bison
INTLLIBS = 
INTLOBJS = 
INTL_LIBTOOL_SUFFIX_PREFIX = 
LIBICONV = 
MAKEINFO = makeinfo
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/bin/msgfmt
ORBIT_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/glib/include -I/usr/include
ORBIT_CONFIG = /usr/bin/orbit-config
ORBIT_IDL = /usr/bin/orbit-idl
ORBIT_LIBS = -L/usr/lib -lORBitCosNaming -lORBit -lIIOP -lORBitutil -lglib -lnsl -lm
PACKAGE = ihm_princ
POFILES = 
POSUB = po
PTHREAD_LIB = -lpthread
RANLIB = ranlib
USE_INCLUDED_LIBINTL = no
USE_NLS = yes
VERSION = 0.1
XPM_LIBS = -lXpm
ZVT_LIBS = -rdynamic -lzvt -lutil -lSM -lICE -lgdk_imlib -lgtk -lgdk -lgmodule -lglib -ldl -lXext -lX11 -lm
cflags_set = yes
cxxflags_set = @cxxflags_set@

INCLUDES =  	-I$(top_srcdir)/intl 	$(GNOME_INCLUDEDIR)


bin_PROGRAMS = ihm_princ

ihm_princ_SOURCES =  	main.c 	support.c support.h 	interface.c interface.h 	callbacks.c callbacks.h                                                        auxiliar.c auxiliar.h                                                          parametro.c parametro.h         


ihm_princ_LDADD = $(GNOME_LIBDIR) $(GNOMEUI_LIBS) $(INTLLIBS)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = 
PROGRAMS =  $(bin_PROGRAMS)


DEFS = -DHAVE_CONFIG_H -I. -I$(srcdir) -I..
CPPFLAGS =  -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/atk-1.0
LDFLAGS = 
LIBS = 
ihm_princ_OBJECTS =  main.o support.o interface.o callbacks.o auxiliar.o \
parametro.o
ihm_princ_DEPENDENCIES = 
ihm_princ_LDFLAGS = 
CFLAGS = -g -O2 -Wall -Wunused 
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
DIST_COMMON =  Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
DEP_FILES =  .deps/auxiliar.P .deps/callbacks.P .deps/interface.P \
.deps/main.P .deps/parametro.P .deps/support.P
SOURCES = $(ihm_princ_SOURCES)
OBJECTS = $(ihm_princ_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .o .s
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


mostlyclean-binPROGRAMS:

clean-binPROGRAMS:
	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)

distclean-binPROGRAMS:

maintainer-clean-binPROGRAMS:

install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo "  $(INSTALL_PROGRAM) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	     $(INSTALL_PROGRAM) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	list='$(bin_PROGRAMS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	done

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

ihm_princ: $(ihm_princ_OBJECTS) $(ihm_princ_DEPENDENCIES)
	@rm -f ihm_princ
	$(LINK) $(ihm_princ_LDFLAGS) $(ihm_princ_OBJECTS) $(ihm_princ_LDADD) $(LIBS)

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = src

distdir: $(DISTFILES)
	here=`cd $(top_builddir) && pwd`; \
	top_distdir=`cd $(top_distdir) && pwd`; \
	distdir=`cd $(distdir) && pwd`; \
	cd $(top_srcdir) \
	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done

DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)

-include $(DEP_FILES)

mostlyclean-depend:

clean-depend:

distclean-depend:
	-rm -rf .deps

maintainer-clean-depend:

%.o: %.c
	@echo '$(COMPILE) -c $<'; \
	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-cp .deps/$(*F).pp .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm .deps/$(*F).pp

%.lo: %.c
	@echo '$(LTCOMPILE) -c $<'; \
	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
	  < .deps/$(*F).pp > .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm -f .deps/$(*F).pp
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am: install-binPROGRAMS
install-exec: install-exec-am

install-data-am:
install-data: install-data-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-binPROGRAMS
uninstall: uninstall-am
all-am: Makefile $(PROGRAMS)
all-redirect: all-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
installdirs:
	$(mkinstalldirs)  $(DESTDIR)$(bindir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-binPROGRAMS mostlyclean-compile \
		mostlyclean-tags mostlyclean-depend mostlyclean-generic

mostlyclean: mostlyclean-am

clean-am:  clean-binPROGRAMS clean-compile clean-tags clean-depend \
		clean-generic mostlyclean-am

clean: clean-am

distclean-am:  distclean-binPROGRAMS distclean-compile distclean-tags \
		distclean-depend distclean-generic clean-am

distclean: distclean-am

maintainer-clean-am:  maintainer-clean-binPROGRAMS \
		maintainer-clean-compile maintainer-clean-tags \
		maintainer-clean-depend maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-am

.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile tags mostlyclean-tags distclean-tags \
clean-tags maintainer-clean-tags distdir mostlyclean-depend \
distclean-depend clean-depend maintainer-clean-depend info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs \
mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]