Re: [GnomeMeeting-list] Ekiga && video conferencing system Polycom VSX.7000

[Damien Sandras <dsandras seconix com>]

Le mercredi 21 juin 2006 à 10:27 +0200, Matthias Apitz a écrit :
> Hello,
> 
> We've in our company (and in our partners as well) the above VC system
> and I tried today morning a call from Ekiga 2.0.2 (compiled from sources)
> to it by just entering the URL
> 
> 	h323:10.0.1.40
> 
> the IP 10.0.1.40 is the LAN addr of the VSX 7000. The call comes up
> in the VSX and I accept the micro button of it to switch micro on.
> I can hear the audio send to the VSX 7000 in the loudspeaker of the
> VSX 7000, but not other way around. My still picture of the Ekiga
> is not shown in the VSX 7000 and I don't see in Ekiga what the cam
> of the VSX 7000 should deliver (and normaly does when I call our
> partners). In Ekiga it says
> 
> Video: Out: PCMU/H261 In: PCMU/
> Audio: Out: PCMU/H261 In: PCMU/
> 
> >From the TCPDUMP I can see that the call is made to port 1720
> and later is a second channel established to port 2542, both from
> my IP (193.31.10.34) to 10.0.1.40.
> 
> When I terminate the call Ekiga freezes. What I'm doing wrong?
> 

Can you post a backtrace of the freeze?
gdb ekiga
type : run
when it freezes, type : thread apply all bt


Thanks,
-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandras ekiga net
                         sip:600000 ekiga net