Re: [GnomeMeeting-list] No Dial Tone when connected to Gatekeeper gc.microtelco.com

["Damien Sandras" <dsandras seconix com>]

Le 12/2/2004, "Zeno R.R. Davatz" <zdavatz ywesee com> a écrit:

>Ok Thanks for all the support.
>
>GnomeMeeting 1.0 greeted me in German! Very nice.
>

;-)


>My Phone works. I tested it with Installations-Druide. I can hear myself talk, hang up, etc.
>

Very nice, it proves our druid works.


>When I connect to gk.micortelco.com with following settings I get no dialtone:
>
>Nat:
>****
>IP-Adresstranslation: yes
>Automatic-IP-Address-check: yes
>
>H.323:
>******
>H.245-Tunnel: active.
>Use H.245 early: active.
>QuickStart: Not active.


Fast start is required for MicroTelco to work.
Also, make sure you have selected teh correct Quicknet output in the
preferences: POTS if you plugged a real phone in the Quicknet card (best
quality), headset if you are using a headset.

Also, what do you mean by "no dialtone". Do you mean that when you hang
up the phone, you hear nothing? Or do you mean that wehn calling
somebody, you hear no dial tone?




>
>My Router configuration is:
>Rule   Start Port No.   End Port No.   IP Address
>---------------------------------------------------
>1.    Default          Default        0.0.0.0
>2.      1720             1720         192.168.0.71
>3.      30000            30010        192.168.0.71
>4.      5000             5003         192.168.0.71
>5.      5010             5013         192.168.0.71
>
>GM tells me I connect to bmac 66 7 159 99
>
>Any hints why I get no dialtone?
>
>Thanks for your Feedback.
>
>Zeno
>
>-- 
>Mit freundlichen Grüssen / best regards
>
>Zeno Davatz
>Verkauf & Akquisition
>
>+41 1 350 85 86
>
>www.ywesee.com > intellectual capital connected > www.oddb.org
>_______________________________________________
>GnomeMeeting-list mailing list
>GnomeMeeting-list gnome org
>http://mail.gnome.org/mailman/listinfo/gnomemeeting-list