Re: [GnomeMeeting-list] GM-0.96 lockups?

[Damien Sandras <dsandras seconix com>]

That's very weird, my thoughts are really a driver problem, try to check
kernel logs.

There is only one driver for the Quickcam, at least for htat kind of
quickcam. It has been reported to work well with some chips, probably
you have a badly supported chipset.


Le jeu 30/01/2003 à 00:26, Jeffrey Bell a écrit :
> Ok,
> 
> It just happened again.
> 
> This time I had called someone from ils.seconix.com, was in a 4 way
> call, tried to leave the session and clicked the "disconnect" button,
> video froze with thier images stll present, although no movement of
> images, then I tried to click the "upper right corner" of the window
> manager to close the window. Would not close window. Tried
> ctrl-alt-backspace to drop out of X, got out, but was still hearing
> audio from the previous call. The cursor was hung, would not give me a
> command prompt. I had another login from a remote computer just in case
> it did it again. Issued a "shutdown -r now", it started a shutdown and
> stopped at:
> 
> "Stopping periodic commands schedule cron_"
> 
> At this time I was still hearing audio.
> 
> This is where it hung, had to do a hard reboot. 
> I have read the replies and will try the suggestions to see if it can be
> repeated.
> 
> Any other webcam drivers for my Quickcam Express USB camera tat I can
> use or am I stuck with it till something better comes along?
> 
> 
> On Wed, 2003-01-29 at 16:57, Jeffrey Bell wrote:
> > I am getting some lock ups that prevent any use of system. This has
> > happened three tiimes so far. Once during a call with a GM-0.96 user and
> > the other two times trying to start GM.
> > 
> > While trying to start GM, my keyboard LEDS blink on/off and I can not
> > use computer. Have to do a hard reboot. Once I did manage to get to a
> > non-X login and the cursor was just there, could not login, no echo to
> > the screen. Tried ssh from another computer, no luck.
> > 
> > I am running :
> > 
> > Intel Celron 550MHZ ABIT BH6 motherboard,
> > 256Mram
> > NVidia Ti4200 AGP card
> > XFree86 Version 4.2.1.1 (Debian 4.2.1-5 20030122074040 build)
> > 
> > USB Logitech Wheel mouse
> > USB Logitech Quickcam Express
> > webcam driver is qce-ga-0.40c
> > 
> > GM-0.96
> > libpt-1.4.7
> > libopenh323-1.11.2
> > 
> > ALSA sound drivers (0.9rc7) for a Yamaha OPL3SA2
> > 
> > Dist: Debian -sid, last dist-upgrade on Jan 28th.
> > 
> > Hope this helps with any troubleshooting that might need to be done.
-- 
 _	Damien Sandras
(o-	GnomeMeeting: http://www.gnomemeeting.org/
//\	FOSDEM 2003:  http://www.fosdem.org
v_/_	H.323 phone:  callto://ils.seconix.com/dsandras seconix com
echo
'12245692587856285105409351sn[ln0=aln256%Pln256/snlbx]sb[q]salbxq'|dc