Re: [GnomeMeeting-list] PC-to-Phone with Quicknet

[Damien Sandras <dsandras seconix com>]

Le jeu 27/02/2003 à 10:01, derek indranet co nz a écrit :

> 
> Now, you should be able to run Gnomemeeting as an ordinary user.
> 
> Running Gnomemeeting as root - surely, this a security problem?
> 

I didn't suggest to run GnomeMeeting as root, I suggested to try to run
it as root to determine if it is a permissions problem. If it is simply
a permission problem, no need to install a new driver version.

> Derek.
> ========
> On 27 Feb 2003, Damien Sandras wrote:
> 
> > Le jeu 27/02/2003 à 07:31, b2g a écrit :
> > > 
> > > 1. yes I've subscribe to microtelco service through linuxjack.com and get a
> > > special gnomemeeting account. Gnomemeeting is connected to the hote
> > > gatekeeper gk.microtelco.com and display something like :
> > > bmac ip-similar-number  And I can check online my account status through GM.
> > 
> > That's correct :)
> > 
> > > 2. I've check the rights:  /proc/ixj is r--r--r--. Is it that I have to
> > > check?
> > > 
> > 
> > No, but simply running GnomeMeeting as "root" could help to determine if
> > it is a permission problem. If it detects the /dev/phone0 as root, then
> > it is ok.
> > 
> > Also, do you have any /dev/phone0 or /dev/phone device ?
> > 
> > > 3. the output of cat /proc/ixj is:
> > > ====================================
> > > $Id: ixj.c,v 4.7 2001/08/13 06:19:33 craigs Exp $
> > > $Id: ixj.h,v 4.1 2001/08/04 14:49:27 craigs Exp $
> > > $Id: ixjuser.h,v 4.1 2001/08/05 00:17:37 craigs Exp $
> > > Driver version 1.0.1
> > > sizeof IXJ struct 21144 bytes
> > > sizeof DAA struct 642 bytes
> > > Using old telephony API
> > > Debug Level 0
> > > 
> > > Card Num 0
> > > DSP Base Address 0xb000
> > > XILINX Base Address 0xb010
> > > DSP Type 8022
> > > DSP Version 01.17
> > > Serial Number 5119034c
> > > Card Type = Internet PhoneJACK PCI
> > > Readers 0
> > > Writers 0
> > > Capabilities 13
> > > DSP Processor load 0
> > > Caller ID data not sent
> > > Play CODEC NO CODEC CHOSEN
> > > Record CODEC NO CODEC CHOSEN
> > > AEC Off
> > > Rec volume 0x100
> > > Play volume 0x100
> > > DTMF prescale 0x40
> > > Hook state 0
> > > Port POTS
> > > SLIC state RINGING
> > > Base Frame 00.00
> > > CID Base Frame  0
> > > Timer Checks 3537
> > > RX Ready Checks 3537
> > > TX Ready Checks 3537
> > > Frames Read 0
> > > Frames Written 0
> > > Dry Buffer 0
> > > Read Waits 0
> > > Write Waits 0
> > > Status Waits 82
> > > Status Wait Fails 0
> > > PControl Waits 0
> > > PControl Wait Fails 0
> > > Is Control Ready Checks 0
> > > Is Control Ready Check failures 0
> > > =======================================
> > > 
> > > 
> > > I am going to try to compile the latest driver to see if any difference. I
> > > will probably recontact you guys for more help.
> > > Thanks a lot for your help and this wonderful soft.
> > > 
> > > Gerald
> > > 
> > > _______________________________________________
> > > GnomeMeeting-list mailing list
> > > GnomeMeeting-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
> > 
-- 
 _	Damien Sandras
(o-	GnomeMeeting: http://www.gnomemeeting.org/
//\	FOSDEM 2003:  http://www.fosdem.org
v_/_	H.323 phone:  callto://ils.seconix.com/dsandras seconix com