[GnomeMeeting-list] Lost with firewire configuration :(

[yannski www-aius u-strasbg fr]

Hello,

As i'm currently completely lost with firewire configuration for the pwlib
and openh323 libraries, I'm writing to this list hoping that someone could
help me as I saw some mails here regarding firewire configuration...

So, my camera is this one http://www.linux1394.org/cgi-bin/view_device.cgi?id=17
and kino and dvgrab works well (dvcont too).
Unfortunately, ohphone doesn't work (I try to get ohphone running before getting
GM running :). As it is mentionned on Debian website, the
pwlib and openh323 libraries are compiled in order to support firewire. So if
first try ohphone after apt-get update && apt-get install those packages.
As ohphone I didn't work, I remove them and download pwlib 1.4.7 and openh323
1.11.2, and compiled them. Of couse I set TRY_1394DC to 1 (ans i can see that
the compilation occurs with -DTRY_1394DC, so I assume that all is going well.
So I compile ohphone and it didn't work. I launch it with
"Arguements are -ln --videotest --videoreceive x11 --videodevice
/dev/video1394 -tttt -o log.txt"
And in log.txt I found
"  0:01.670      TestUserIn...d:0808d800     tlibthrd.cxx(981)   PWLib  
Thread high water mark set: 4
 0:01.674                      OhPhone    h261codec.cxx(360)   H261    QCIF
decoder created.
 0:01.691      TestUserIn...d:0808d800         main.cxx(3602)  OhPhone
TESTING interface thread started.
 0:01.691                      OhPhone    h261codec.cxx(812)   H261  
fillLevel set to 2
 0:01.726                      OhPhone         main.cxx(2124)  Available
video input device:  /dev/video0
 0:01.726                      OhPhone         main.cxx(2124)  Available
video input device:  /dev/video1
 0:01.726                      OhPhone         main.cxx(2124)  Available
video input device:  fake
 0:01.726                      OhPhone         main.cxx(2124)  Available
video input device:  /dev/raw1394
 0:01.726                      OhPhone         main.cxx(2124)  Available
video input device:  /dev/video1394
 0:01.726                      OhPhone         main.cxx(2129)  Attempt to
open videoDevice /dev/video1394 for reading.  0:01.744                    
OhPhone video4dc1394.cxx(283)   no cameras found
                                                                           
                                       
 0:01.744                      OhPhone         main.cxx(2131)  Failed to open
the camera device
 0:01.744                      OhPhone      videoio.cxx(501)   PVidDev
SetFrameSize to 176x144
 0:01.744                      OhPhone         main.cxx(2166)  Made a
fictitious video camera showing NTSC test frame
 0:01.744                      OhPhone      videoio.cxx(501)   PVidDev
SetFrameSize to 1x1
 0:01.744                      OhPhone      xlibvid.cxx(156)   Generic
constructor start.
 0:01.744                      OhPhone         main.cxx(2227)
device->SetFrameSize(176,144) from codec
 0:01.745                      OhPhone      xlibvid.cxx(192)   XDisplay    
  SetFrameSize Start for the Encoding window"

So what is going wrong ?

++

yk