Re: =?UTF-8?B?Y29uZmlndXJhw6fDo28gZG8gU2FtYmE=?=

Marcos, por hora tente alterar as opÃÃes "Domain members Options" e "Domain Controller Options" inserindo as informaÃÃes que faltam (como senha do servidor, nome do servidor....).

Estou repassando este e-mail para mais amigos que possÃvelmente poderÃo auxiliÃ-lo melhor.

Sua iniciativa de pedir ajuda por e-mail à muito correta, pois sempre haverà alguÃm que poderà lhe responder, ok ?

Um forte abraÃo e parabÃns por fazer um curso de TI (faÃo sistemas de info. xD ).

Enrico Nicoletto.
Marcos Antonio escreveu:
  Boa noite, sou estudante de Engenharia Computacional na Universidade
CatÃlica de GoiÃnia, e estou com problemas na configuraÃÃo de um
servidor samba, utilizo o Fedora core 10, e o samba versÃo 3.2, segue em
anexo o smb.conf.

  Quando tento acessar a rede windows sempre me retorna esse erro:

   failed to retrieve share list from server.

  pesquisando na internet encontrei um arquivo escrito por vc e mais
dois amigos, com o seguinte cabeÃalho:

# Brazilian Portuguese translation of Gvfs 
# Copyright (C) 2000-2008 Free Software Foundation, Inc.
# This file is distributed under the same license as the Gvfs package.
# Enrico Nicoletto <liverig gmail com>, 2008.
# Jonh Wendell <wendell bani com br>, 2008.
# Vladimir Melo <vmelo gnome org>, 2008, 2009.

portanto tomei a liberdade de enviar-lhe esse e-mail, desculpe se estou
sendo incoveniente, mas se puder me ajudar ficarei muito grato e espero
contribuir em algo num futuro prÃximo a comunidade Open Source.

  em uma das linhas do arquivo à descrito esse erro, mas como sou
iniciante em Linux ainda nÃo consegui entender bem como se trata esse

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba, 
# read the Samba-HOWTO-Collection. This may be obtained from:
# Many working examples of smb.conf files can be found in the 
# Samba-Guide which is generated daily and can be downloaded from: 
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
# Use ls -ldZ /path to see which context a directory has
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#======================= Global Settings =====================================


# ----------------------- Netwrok Related Options -------------------------
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
# server string is the equivalent of the NT Description field
# netbios name can be used to specify a server name not tied to the hostname
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
        workgroup = LEFORTI
        server string = Servidor

        netbios name = MYSERVER

;       interfaces = lo eth0 
;       hosts allow = 127. 192.168.12. 192.168.13.

# --------------------------- Logging Options -----------------------------
# Log File let you specify where to put logs and how to split them up.
# Max Log Size let you specify the max size log files should reach

        # logs split per machine
        log file = /var/log/samba/log.%m
        # max 50KB per log file, then rotate
        max log size = 50

# ----------------------- Standalone Server Options ------------------------
# Scurity can be set to user, share(deprecated) or server(deprecated)
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.

        security = user
        passdb backend = tdbsam

# ----------------------- Domain Members Options ------------------------
# Security must be set to domain or ads
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *

;       realm = MY_REALM

;       password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
# Security must be set to user for domain controllers
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
# Domain Logons let Samba be a domain logon server for Windows workstations. 
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
# Logon Path let you specify where user profiles are stored (UNC path)
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts

;       domain master = yes 
;       domain logons = yes

        # the login script name depends on the machine name
;       logon script = %m.bat
        # the login script name depends on the unix user used
;       logon script = %u.bat
;       logon path = \\%L\Profiles\%u
        # disables profiles support by specifing an empty path
;       logon path =          

;       add user script = /usr/sbin/useradd "%u" -n -g users
;       add group script = /usr/sbin/groupadd "%g"
;       add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
;       delete user script = /usr/sbin/userdel "%u"
;       delete user from group script = /usr/sbin/userdel "%u" "%g"
;       delete group script = /usr/sbin/groupdel "%g"

# ----------------------- Browser Control Options ----------------------------
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;       local master = no
;       os level = 33
;       preferred master = yes

#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
# - WINS Proxy: Tells Samba to answer name resolution queries on
#   behalf of a non WINS capable client, for this to work there must be
#   at least one        WINS Server on the network. The default is NO.
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.

;       wins support = yes
;       wins server = w.x.y.z
;       wins proxy = yes

;       dns proxy = yes

# --------------------------- Printing Options -----------------------------
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
# Printcap Name let you specify an alternative printcap file
# You can choose a non default printing system using the Printing option

;       load printers = yes
        cups options = raw

;       printcap name = /etc/printcap
        #obtain list of printers automatically on SystemV
;       printcap name = lpstat
;       printing = cups

# --------------------------- Filesystem Options ---------------------------
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares

;       map archive = no
;       map hidden = no
;       map read only = no
;       map system = no
        username map = /etc/samba/smbusers
;       encrypt passwords = yes
;       guest ok = no
;       guest account = nobody
;       store dos attributes = yes

#============================ Share Definitions ==============================

        comment = Home Directories
        path = /home/Marcos/mp3
        browseable = no
        writable = yes
;       valid users = %S
;       valid users = MYDOMAIN\%S

        comment = All Printers
        path = /var/spool/samba
        browseable = no
;       guest ok = no
;       writable = No
        printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
;       [netlogon]
;       comment = Network Logon Service
;       path = /var/lib/samba/netlogon
;       guest ok = yes
;       writable = no
;       share modes = no

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;       [Profiles]
;       path = /var/lib/samba/profiles
;       browseable = no
;       guest ok = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;       [public]
;       comment = Public Stuff
;       path = /home/samba
;       public = yes
;       writable = yes
;       printable = no
;       write list = +staff

#       path = /home/Marcos/mp3
#       writeable = yes
#;#     browseable = yes
#       valid users = Marcos

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]