Re: control timeout on ep0in

[gnome-pilot dormon com]

Ok I've rolled a vanilla 2.6.9 running on FC2 x86_64 and am still 
getting the dreaded timeout errors.

This is on a gigabyte k8n pro and to be honest usb seems a bit strange 
on this box (as well as sata!) I've forced the ports to usb 1 in the 
bios and that has helped the other usb devices 
(keyboard, mouse, printer, cardreader) but I'm completely stuck getting 
my treo working :(

Anyone got any ideas? Or should I take this over to the usb boys? Or 
frisbee this motherboard!

# lspci|grep -i 
usb 00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
01:07.0 USB Controller: OPTi Inc. 82C861 (rev 10)

# grep usb /etc/modprobe.conf
alias usb-controller1 ohci-hcd

# lsmod|egrep 'hcd|usb'
usbserial              28080  1 visor
usblp                  11712  0
usb_storage           101584  0
ohci_hcd               16132  0
scsi_mod              116768  4 sg,usb_storage,libata,sd_mod

# dmesg
usb 3-2.1: new full speed USB device using address 6
drivers/usb/serial/usb-serial.c: USB Serial support registered for 
Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for 
Handspring Visor / Palm OS
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony 
Clie 3.5
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony 
Clie 5.0
visor 3-2.1:1.0: Handspring Visor / Palm OS converter detected
usb 3-2.1: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 3-2.1: Handspring Visor / Palm OS converter now attached to ttyUSB1
usbcore: registered new driver visor
drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver v2.1
usb 3-2.3.2: control timeout on ep0in
usb 3-2.3.2: control timeout on ep0in
usb 3-2.3.2: string descriptor 0 read error: -110
usb 3-2.3.2: control timeout on ep0in
usb 3-2.3.2: control timeout on ep0in
usb 3-2.3.2: string descriptor 0 read error: -110