treo sync problems

[marty <mrmeyers satx rr com>]

Has anyone been successful in syncing a Treo 90. I am able to sync using
jpilot but not the gnome-pilot applet. Here is the list of packages that
I am using:

pilot-link095-compat-0.9.5-22
jpilot-0.99.6-1
gnome-pilot-conduits-2.0.10-0.ximian.6.1
pilot-link-0.11.7-1
gnome-pilot-applet-2.0.10-0.ximian.6.1
gnome-pilot-2.0.10-0.ximian.6.1
evolution-pilot-1.4.3-0.ximian.6.1

Here are the modules that are running when I do a lsmod:

visor                  12232   0
usbserial              22108   0  [visor]
usb-ohci               21704   0  (unused)
usbcore                79040   1  [visor usbserial usb-storage scanner
hid usb-o

And this is what shows up in /var/log/messages when my Treo locks up and
I have to do a soft reset to get it working again. This is a long list
of I/O errors and things. Not sure why I am getting all of the SCSI
errors. Also my floppy drive searches the drive when I attempt the sync.

Aug  3 00:00:13 MadHat kernel: usb.c: USB disconnect on device
00:02.2-1.2 address 5
Aug  3 00:00:13 MadHat kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0 / Cli? 4.x converter now disconnected from ttyUSB0
Aug  3 00:00:13 MadHat kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0 / Cli? 4.x converter now disconnected from ttyUSB1
Aug  3 00:00:13 MadHat kernel: cdrom: This disc doesn't have any tracks
I recognize!
Aug  3 00:00:14 MadHat kernel: sddr09: could not read card info
Aug  3 00:00:14 MadHat last message repeated 2 times
Aug  3 00:00:14 MadHat kernel: sda : READ CAPACITY failed.
Aug  3 00:00:14 MadHat kernel: sda : status = 1, message = 00, host = 0,
driver = 08
Aug  3 00:00:14 MadHat kernel: Current sd00:00: sense key None
Aug  3 00:00:14 MadHat kernel: sda : block size assumed to be 512 bytes,
disk size 1GB.
Aug  3 00:00:14 MadHat kernel: sda: Write Protect is off
Aug  3 00:00:14 MadHat kernel:  sda:SCSI disk error : host 0 channel 0
id 0 lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 0
Aug  3 00:00:14 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 2
Aug  3 00:00:14 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 4
Aug  3 00:00:14 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 6
Aug  3 00:00:14 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 0
Aug  3 00:00:14 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 2
Aug  3 00:00:14 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 4
Aug  3 00:00:14 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:00:14 MadHat kernel:  I/O error: dev 08:00, sector 6
Aug  3 00:00:14 MadHat kernel:  unable to read partition table
Aug  3 00:00:14 MadHat devlabel: devlabel service started/restarted
Aug  3 00:01:14 MadHat kernel: hub.c: new USB device 00:02.2-1.2,
assigned address 6
Aug  3 00:01:14 MadHat kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0 / Cli? 4.x converter detected
Aug  3 00:01:14 MadHat kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0 / Cli? 4.x converter now attached to ttyUSB0 (or usb/tts/0 for
devfs)
Aug  3 00:01:14 MadHat kernel: usbserial.c: Handspring Visor / Treo /
Palm 4.0 / Cli? 4.x converter now attached to ttyUSB1 (or usb/tts/1 for
devfs)
Aug  3 00:01:15 MadHat kernel: visor.c: Bytes In = 0  Bytes Out = 0
Aug  3 00:01:17 MadHat kernel: visor.c: visor_open - failed submitting
interrupt urb, error -19
Aug  3 00:01:17 MadHat kernel:
Aug  3 00:01:18 MadHat /etc/hotplug/usb.agent: Setup visor for USB
product 82d/200/100
Aug  3 00:01:18 MadHat kernel: sddr09: could not read card info
Aug  3 00:01:18 MadHat last message repeated 2 times
Aug  3 00:01:18 MadHat kernel: sda : READ CAPACITY failed.
Aug  3 00:01:18 MadHat kernel: sda : status = 1, message = 00, host = 0,
driver = 08
Aug  3 00:01:18 MadHat kernel: Current sd00:00: sense key None
Aug  3 00:01:18 MadHat kernel: sda : block size assumed to be 512 bytes,
disk size 1GB.
Aug  3 00:01:18 MadHat kernel: sda: Write Protect is off
Aug  3 00:01:18 MadHat kernel:  sda:SCSI disk error : host 0 channel 0
id 0 lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 0
Aug  3 00:01:18 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 2
Aug  3 00:01:18 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 4
Aug  3 00:01:18 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 6
Aug  3 00:01:18 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 0
Aug  3 00:01:18 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 2
Aug  3 00:01:18 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 4
Aug  3 00:01:18 MadHat kernel: SCSI disk error : host 0 channel 0 id 0
lun 0 return code = 70000
Aug  3 00:01:18 MadHat kernel:  I/O error: dev 08:00, sector 6
Aug  3 00:01:18 MadHat kernel:  unable to read partition table
Aug  3 00:01:18 MadHat devlabel: devlabel service started/restarted
Aug  3 00:01:19 MadHat kernel: visor.c: visor_open - failed submitting
read urb, error -22

Thanks

Marty